Technologies Printer User Manual
Table Of Contents
- Introducing the EasyCoder PL4 Printer
- Learning About the Printer
- Installing the Battery
- Charging the Battery
- Understanding the Control Panels
- Loading the Media
- Loading Fanfold Media
- Verifying the Printer Is Working
- Establishing Communications With a Terminal
- Setting Up the Software
- Downloading Firmware
- Using the Accessories
- Maintaining the Printer
- Troubleshooting
- Specifications
52 EasyCoder PL4 Printer User’s Guide
Label taken
sensor
Gap
sensor
Edge guides,
inner
Bearing
points
(2 places)
Media
rollers
(2 places)
Black mark
sensor
Platen
surface
Printhead
elements
Tear
bar
Self-strip
rollers
Self-strip
bar
PL4U029.eps
Identifying the parts for cleaning
Troubleshooting
You may have printer operation, print quality, or printer
communications problems at some time during the life of the
printer. It is easy to fix most of the problems and not delay
operation of the printer for very long. Use the following tables to
understand what the control panel is indicating and to help
troubleshoot your printer problem.
If you cannot find a solution to your problem, contact an
Intermec customer service representative. In the U.S.A. call
1.800.755.5505, and in Canada call 1.800.668.7043. If you are
an international customer, contact your local Intermec
representative.