Technologies Printer User Manual
Table Of Contents
- Introducing the EasyCoder PL4 Printer
- Learning About the Printer
- Installing the Battery
- Charging the Battery
- Understanding the Control Panels
- Loading the Media
- Loading Fanfold Media
- Verifying the Printer Is Working
- Establishing Communications With a Terminal
- Setting Up the Software
- Downloading Firmware
- Using the Accessories
- Maintaining the Printer
- Troubleshooting
- Specifications

50 EasyCoder PL4 Printer User’s Guide
• Pull the battery out of the printer if you will not be using the
printer for a day or more and you are not performing a
maintenance charge.
• Consider purchasing an extra battery (P/N AT16293-2).
• Remember that any rechargeable battery loses its ability to
maintain a charge over time. It can only be recharged a finite
number of times before it must be replaced.
Cleaning the Printer
Use only cleaning agents specified below. Intermec is not
responsible for damage caused by any other cleaning
materials used on this printer. Clean the printer with a
cotton swab saturated with alcohol.
Attention: Utiliser seulement les produits de nettoyage
précisés ci-dessous. Intermec n’est pas responsable des
dommages causés par tout autre produit de nettoyage
utilisé pour cette imprimante. Nettoyer l’imprimante à
l’aide d’un coton-tige imbibé d’alcool.
To avoid possible personal injury or damage to the
printer, never insert any pointed or sharp objects into
the printer.
Avertissement: Pour éviter des blessures corporelles ou
des dommages à l’imprimante, il ne faut jamais insérer
un objet pointu ou tranchant dans l’imprimante.