Technologies Printer User Manual

Intermec EasyCoder PF4i Compact Industrial—User’s Guide (Fingerprint) 77

Chapter 8—Intermec Shell Startup Program

Other Facilities

• Setup Mode (manual setup from printer’s keyboard)

• Print Setup (printing setup on label)

• Testfeed (formfeeds and auto-adjust of the LSS)

• Test Label (printing of test labels)

• Default setup (resetting all setup parameters to default)

• Software Update (downloading data from a host to a CompactFlash

card in the printer, upgrading the printer’s ﬁ rmware from a Compact-

Flash card, or upgrading the printer’s ﬁ rmware from a ﬁ le in a PC)

• Reboot (restarting the printer)

Note: Intermec Shell is factory-installed in the printer’s per-

manent memory (device "/rom"). If you insert a memory card

with another startup ﬁ le before you switch on the printer, or if

there is a startup ﬁ le stored in the printer’s permanent memory

(device "/c"), this startup ﬁ le will be used instead of Intermec

Shell (see Chapter 3, “Startup Files”).