User`s manual

Chapter 3 — Configuring the CV60
40 CV60 Vehicle Mount Computer With Windows CE User’s Manual
a Select User name and type your user name.
b Select Password prompt, and choose Enter password
now.
c Select User Password and type a user password.
d For Validate Server Certificate, choose Enabled.
If you choose TLS:
a Load a user and root certificate on your CV60. For help,
see “Loading a Certificate” on page 54.
b For Validate Server Certificate, choose Yes.
c You must enter a User Name and Subject Name. You can
also enter a Server Common Name if you want to
increase your level of security.
7 Save your settings.
Configuring LEAP Security With Funk Security
1 Open Intermec Settings.
2 Make sure you have configured the communications
parameters and selected Funk as your security choice.
3 From Intermec Settings, choose Communications > 802.11
Radio > Funk Security > Profile.
4 For 8021x, choose LEAP.
5 For Association, choose Open, WPA, WPA2, or Network
EAP. Encryption automatically defaults to TKIP if you
choose WPA, to AES if you choose WPA2, and to WEP if
you choose Open or Network EAP.
6 For Prompt for Credentials, choose Enter credentials now.
7 Select User name and type your user name.
8 Select User Password and type a user password.
9 Save your settings.
Note: You can use Prompt for password to troubleshoot
your connection to the network if you have problems.