User`s manual

Chapter 3 — Configuring the CV60
38 CV60 Vehicle Mount Computer With Windows CE User’s Manual
c Select User Password and type a user password.
d For Validate Server Certificate, choose Yes.
If you choose TLS:
a Load a user and root certificate on your CV60. For help,
see cross reference.
b For Validate Server Certificate, choose Yes.
You must enter a User Name and Subject Name. You can
also enter a Server Common Name if you want to
increase your level of security.
6 Save your settings.
To enable WPA-PSK or WPA2-PSK with Funk security
1 Open Intermec Settings.
2 Make sure you have configured the communications
parameters and selected Funk as your security choice.
3 Choose Communications > 802.11 Radio > Funk Security
> Profile.
4 For Association, choose WPA or WPA2.
5 For 8021x, choose None.
6 For Pre-Shared Key, enter the pre-shared key or the
passphrase.
Note: You must have the date on the CV60 set correctly
when you enable Validate Server Certificate.