User`s manual

Chapter 3 — Configuring the CV60
CV60 Vehicle Mount Computer With Windows CE User’s Manual 37
2 Make sure you have configured the communications
parameters and selected Funk as your security choice.
3 Choose Communications > 802.11 Radio > Funk Security
> Profile.
4 For Association, choose WPA or WPA2 and press Enter.
Encryption automatically defaults to TKIP if you are using
WPA. Encryption automatically defaults to AES if you are
using WPA2.
5 For 8021x, choose TTLS, PEAP, EAP-FAST, or TLS and
press Enter.
If you choose TTLS or PEAP:
a For Prompt for Credentials, choose Enter credentials
now.
b Select User name and type your user name.
Note: You can use Prompt for credentials to
troubleshoot your connection to the network if you have
problems. By choosing Enter credentials now, you are
storing the user name and password on the device so that
you will not need to enter it every time.