User`s manual

Chapter 5 — Troubleshooting and Maintaining the CV30
84 CV30 Fixed Mount Computer User’s Manual
To clean boot the CV30
1 Using a small pointed device (such as the end of the stylus) or
your finger, press the Reset switch on the top of the CV30 at
the same time as you press the Power button.
The blue light on the CV30 blinks once and the CV30 starts
the booting sequence.
2 Reload any custom applications that may have been erased
during the clean boot and reset the time and date.
Cleaning the Screen
To keep the CV30 in good working order, you may need to clean
the screen whenever necessary depending on the environment in
which you use the computer. To clean the CV30, use a solution
of ammonia and water.
To clean the screen
1 Disconnect the CV30 from the power supply.
2 Dip a clean towel or rag in the ammonia solution and wring
out the excess. Wipe off the screen. Do not allow any abrasive
material to touch these surfaces.
3 Wipe dry.
Do not use force or a sharp object when pressing the reset
switch. You may damage the reset switch.
802.11
Reset