User's Manual

Chapter 4 — Use the Camera
70 CN51 Mobile Computer User Manual
frame turns white and a red target appears. The camera tries to
focus on the center of the document.
When the focus and distance are correct, the target turns white and
the document image is captured.
5 To view the document capture image, you can browse to
MyDocuments\MDI and tap the image file to view it.
Camera Settings for Document Imaging
To use the camera for document imaging, you must use the Intermec
Settings application to configure the camera. From the main screen of
Intermec Settings, select Data Collection > Camera > Camera
Settings > Document Imaging.
Settings Description Choices
Enable
document
imaging
Enables or disables
document imaging.
Disable
Enable without decode
Focus check Sets the acceptable
focus level for
document imaging.
Disable (no focus check)
Medium level
High level
Image/area to
capture ratio
Default is 30.
Output
compression
Sets the image
compression level.
Bitmap
JPEG
TIFFG4
Output
compression
quality
Sets the output
compression quality
level.
Default is 60.
Perspective
correction
Corrects the
document image for
perspective.
Enable (default) or disable.
Color
conversion
None (default)
Monochrome
Enhanced monochrome (TIFF)