User's Manual

Chapter 4 — Use the Camera
CN51 Mobile Computer User Manual 69
Enable or Disable Document Capture with the Camera
You use the Profile Settings application to enable or disable document
capture with the camera. Performing document capture with the
camera is disabled by default.
1 Tap Start > ProfileSettings.
2 Tap Camera.
3 In the Camera menu, tap Enable document image to enable
document capture.
To disable document capture, tap Disable bar code scan.
4 Tap OK.
Perform Document Capture with the Camera
After you enable document capture with the camera, document
capture images are saved to the MyDocuments\MDI directory on the
computer by default.
1 Place your document on a flat surface.
2 Position the computer a few inches above the center of the
document.
3 Press and hold the Scan button. The video preview and camera
viewfinder frame appear.
When the viewfinder tries to detect the document edges, the
viewfinder frame is red and pulses slightly.
4 Move the camera to align the document edges with the viewfinder.
When the viewfinder detects the document edges, the viewfinder
Note: To perform document capture using the camera, you must use
Intermec Settings to configure all document capture settings.
Note: You can also enable document capture by setting parameters in
Intermec Settings.