User's Manual

Chapter 4 — Use the Camera
CN51 Mobile Computer User Manual 67
Illumination level Default is 3.
Initial 1D search
area
Center
Full
Smart raster
Damaged 1D codes
Disable
Enable
Viewfinder and Focus Settings and Descriptions
Setting Description Choices
Enable viewfinder Enable or disable.
Focus mode Sets the focus mode for the
camera when reading bar codes,
document imaging, or capturing
signatures.
Manual
Continuous
autofocus
Single shot
autofocus
Macro
Extended (10 cm
to infinity)
Manual focus value When Focus Mode is set to
Manual, this value sets the
manual focus level.
Default is 65. Set to
0 for infinity, or 255
for closeups.
Lighting Settings and Descriptions
Setting Description Choices
Torch
Off
On
Auto
Optimized Imager Mode (Advanced) Settings and Descriptions
Setting Description Choices