User's Manual

Chapter 3 — Use the Phone
CN51 Mobile Computer User Manual 45
How to Add and Switch Between Network
Carriers
If your computer includes the software-defined radio, you can easily
add carriers and switch between them as needed. When you enable
automatic configuration of carrier settings through Intermec Settings,
you only need to select a different carrier to change networks.
If you plan to add a carrier, you should enable automatic
configuration of carrier settings before you activate the phone for the
new carrier. This feature is disabled by default.
Enable Automatic Configuration of Carrier Settings
If you plan to add another WAN radio network carrier, you should
enable automatic configuration of carrier settings before you activate
the phone for the new carrier.
1 Tap Start > Settings > System > Intermec Settings.
2 Tap Communications > WWAN > Carrier Settings Auto
Config.
3 Select Enabled and tap OK.
Switch Carriers Using Intermec Settings
Use Intermec Settings to quickly change your WAN radio network
carrier.
1 Tap Start > Settings > System > Intermec Settings >
Communications > WWAN > Carrier Choice.
Note: Your computer must have the software-defined radio to use this
feature.
Note: Your computer must have the software-defined radio to switch
carriers using this method.