User's Manual

Chapter 1 — About the Computer Features
CN51 Mobile Computer User Manual 13
Configure the Keypad Backlight
You can configure the keypad backlight to always turn on, always stay
off, or turn on depending on the lighting level of your work
environment.
1 Start Intermec Settings.
2 Tap Device Settings > Backlight > Keypad.
3 Select the options you want for the keypad backlight:
• Select Always off to prevent the keypad backlight from turning
on.
• Select Automatic to turn on the keypad backlight
automatically based on the ambient light level.
• Select On With the Display to turn on the keypad backlight
only when the display is on. When the CN51 suspends, the
keypad backlight turns off to save power.
• Select Always on to turn the keypad backlight on all the time.
4 Tap OK.
About the Color-Coded Keys
Use the orange key and the green key to access additional
characters, symbols, and functions printed on the keypad overlay.
After you understand how to use the color-coded keys and key
sequences, you can access all of the additional features printed on the
keypad overlay.
The default setting for the Green/Orange keys is Press twice to lock.
You can also set the keys to Press once to lock if you do not want the
Green/Orange keys to lock after pressing them twice. The information
in this section assumes that you are using the default setting for the
Green/Orange keys lock options. To change the setting for the
Green/Orange keys, go to Start > Settings > System > Intermec
Settings > Device Settings > Keypad.
Note: The CN51 with QWERTY keypad does not have a green key.