User's Manual

Chapter 6 — Configure the Computer
CN51 Mobile Computer User Manual 95
c Tap OK.
d When you are prompted to load the root certificate, tap OK.
e When the message box appears to let you know the certificate
has been added, tap OK.
How to Make Your Security Choice
The computer supports Funk and Microsoft® security. Your security
choice depends on your network security needs:
• Choose Funk security if you use the computer in a static
environment that requires a high level of security. Funk security
provides CCX v4 compliance, support for LEAP and TTLS, and
configuration for up to four profiles. Funk security is the default
security setting on the computer.
• Choose Microsoft security if you primarily use the computer to
connect to Wi-Fi hotspots.
Select a Funk Security Profile
You can define up to four profiles for Funk security. Different profiles
let your computer communicate in different networks without having
to change all your security settings. For example, you may want to set
up one profile for the manufacturing floor and one for the warehouse.
By default, the active profile is Profile 1.
1 Start Intermec Settings.
2 Select Communications > 802.11 Radio > Funk Security.
3 Tap a profile to expand it.
4 (Optional) In the Profile Label text box, enter a meaningful name
for your profile.
5 Configure your security settings. For help, see the next sections.
6 Repeat Steps 3 through 5 for each profile you want to define.
7 To set the active profile, tap Active Profile and select a profile from
the list.
8 Save your settings.