User's Manual
Table Of Contents
- Before You Begin
- Chapter 1 - Using the CN50
- Chapter 2 - Connecting and Configuring the CN50
- Configuring the CN50
- Connecting to a PC
- Connecting to Your Network
- Configuring Wireless Security
- Configuring the Phone
- Connecting to an ISP
- Connecting to a Network With a VPN Server
- Chapter 3 - Developing and Installing Applications
- Chapter 4 - Troubleshooting and Maintaining the CN50
- Appendix A - Specifications
- Appendix B - Default Settings
- Appendix C - Keypads and Keystrokes
- Appendix D - Imager Configuration Bar Codes
- Index
Chapter 4 — Troubleshooting and Maintaining the CN50
CN50 Mobile Computer for Windows Mobile 6.1 User’s Manual 81
5 When prompted, tap the screen to set up the CN50.
6 Follow the instructions to calibrate the screen.
Cleaning the CN50
To keep the CN50 in good working order, you may need to clean the
imager window, color camera window, and the touch screen. Clean the
windows and the touch screen as often as needed for the environment
in which you are using the CN50. To clean the CN50, use a solution of
one part ammonia and three parts water.
To clean the image window, camera window, and touch screen:
1 Press the Power button to suspend the CN50.
2 Dip a clean cloth towel in the ammonia solution and wring out the
excess.
3 Wipe off the imager window, camera lens, and flash area. Do not
allow any abrasive material to touch these surfaces.
4 Wipe dry.
There are no user-serviceable parts inside the CN50. Opening the
CN50 will void the warranty and may cause damage to the internal
components.