User's Manual
Table Of Contents
- Before You Begin
- Chapter 1 - Using the CN50
- Chapter 2 - Connecting and Configuring the CN50
- Configuring the CN50
- Connecting to a PC
- Connecting to Your Network
- Configuring Wireless Security
- Configuring the Phone
- Connecting to an ISP
- Connecting to a Network With a VPN Server
- Chapter 3 - Developing and Installing Applications
- Chapter 4 - Troubleshooting and Maintaining the CN50
- Appendix A - Specifications
- Appendix B - Default Settings
- Appendix C - Keypads and Keystrokes
- Appendix D - Imager Configuration Bar Codes
- Index
Chapter 2 — Connecting and Configuring the CN50
52 CN50 Mobile Computer for Windows Mobile 6.1 User’s Manual
8 If you choose TLS:
a Choose Properties > Run App. The Auth. Settings box
appears.
b Choose Select.
c Select your certificate from the list and press Enter. The User
Logon dialog box appears.
d Enter a User Name and a Domain.
If you choose PEAP:
e Choose Properties > Run App. The Auth. Settings box appears.
f Select Validate Server and press Enter. When the radio starts
to authenticate, the Network Password dialog box appears.
g Enter a User Name and Password and select Save Password.
h (Optional) In the Domain field, enter the domain.
i Press Enter.
9 For Network Key Setting, choose Automatic.
10 Save your settings.
Configuring Static WEP Security With Microsoft Security
Use the following procedure to configure static WEP security with
Microsoft security.
1 Make sure the communications and radio parameters on your
CN50 are configured.
2 Start Intermec Settings.
3 Choose Communications > 802.11 Radio > Microsoft Security.
4 For Network Authentication, choose Open.
5 For Data Encryption, choose WEP.
6 For Network Key Setting, choose Enter Key and Index.