User's Manual
Table Of Contents
- Before You Begin
- Chapter 1 - Using the CN50
- Chapter 2 - Connecting and Configuring the CN50
- Configuring the CN50
- Connecting to a PC
- Connecting to Your Network
- Configuring Wireless Security
- Configuring the Phone
- Connecting to an ISP
- Connecting to a Network With a VPN Server
- Chapter 3 - Developing and Installing Applications
- Chapter 4 - Troubleshooting and Maintaining the CN50
- Appendix A - Specifications
- Appendix B - Default Settings
- Appendix C - Keypads and Keystrokes
- Appendix D - Imager Configuration Bar Codes
- Index
Chapter 2 — Connecting and Configuring the CN50
50 CN50 Mobile Computer for Windows Mobile 6.1 User’s Manual
Configuring Static WEP Security With Microsoft Security
Use the following procedure to configure static WEP security with
Microsoft security.
1 Make sure the communications and radio parameters on your
CN50 are configured.
2 Start Intermec Settings.
3 Choose Communications > > 802.11 Radio > Microsoft
Security.
4 For Network Authentication, choose Open.
5 For Network Authentication, choose WPA. Data Encryption
automatically defaults to TKIP.
6 For 802.1x Authentication, choose either MD5, TLS, or PEAP.
7 If you choose TLS:
a Choose Properties > Run App. The Auth. Settings dialog box
appears.
b Choose Select.
c Select your certificate from the list and press Enter. The User
Logon dialog box appears.
d Enter a User Name and Domain and press Enter.
If you choose PEAP:
e Choose Properties > Run App. The Auth. Settings box appears.
f Choose Validate Server and press Enter. When the radio starts
to authenticate, the Network Password dialog box appears.
g Enter a User Name and Password and select Save Password.
h (Optional) In the Domain field, enter the Active Directory
domain associated with the user account.
8 Save your settings.