User's Manual

Chapter 2 — Connecting and Configuring the CN50
CN50 Mobile Computer for Windows Mobile 6.1 User’s Manual 45
8 For 8021x, choose TTLS, PEAP, or TLS.
9 If you chose TTLS or PEAP:
a Enter a User Name.
b For Prompt for Credentials, choose Enter credentials now.
c Enter a User Password.
d For Validate Server Certificate, choose Yes.
10 If you choose TLS:
a Load a user and root certificate on your CN50. For help, see
“Loading a Certificate” on page 53.
b For Validate Server Certificate, choose Yes.
c Enter a User Name and Subject Name.
d (Optional) To increase your level of security, enter a Server 1
Common name and a Server 2 Common name.
11 (Optional) To increase your level of security, enter a Server 1
Common name and a Server 2 Common name.
12 Save your settings.
Configuring LEAP Security
Use the following procedure to configure LEAP security.
1 Make sure the communications and radio parameters on your
CN50 are configured.
2 Make sure Funk is selected as your security choice.
3 Start Intermec Settings.
4 Choose Communications > 802.11 Radio > Funk.
5 Select the profile you want to configure.
6 For 8021x, choose LEAP.
7 For Association, choose Open, WPA, WPA2, or Network EAP.
Encryption automatically defaults to TKIP if you choose WPA,
Note: You can use Prompt for Credentials to troubleshoot your
network connection.