User's Manual
Table Of Contents
- Before You Begin
- Chapter 1 - Using the CN50
- Chapter 2 - Connecting and Configuring the CN50
- Configuring the CN50
- Connecting to a PC
- Connecting to Your Network
- Configuring Wireless Security
- Configuring the Phone
- Connecting to an ISP
- Connecting to a Network With a VPN Server
- Chapter 3 - Developing and Installing Applications
- Chapter 4 - Troubleshooting and Maintaining the CN50
- Appendix A - Specifications
- Appendix B - Default Settings
- Appendix C - Keypads and Keystrokes
- Appendix D - Imager Configuration Bar Codes
- Index
Chapter 2 — Connecting and Configuring the CN50
CN50 Mobile Computer for Windows Mobile 6.1 User’s Manual 35
2 Tap the Turn on Bluetooth check box.
3 (Optional) To make the CN50 visible to other Bluetooth devices,
tap Make this device visible to other devices.
4 Tap OK.
The Bluetooth radio maintains its state through a warm or cold
boot and maintains virtual COM ports. But, if you clean boot your
CN50 you need to recreate pairings to devices.
Connecting to a Bluetooth Scanner
You can connect to an Intermec Bluetooth scanner, such as the SF51
or SR61, by using the Wireless Scanning enabler.
To use the Wireless Scanning enabler:
1 Tap Start > Settings > System tab > Wireless Scanning.