User's Manual

Chapter 1 — Using the CN50
14 CN50 Mobile Computer for Windows Mobile 6.1 User’s Manual
Calibrating the Touch Screen
If the touch screen does not respond when you tap it with the stylus,
you may need to calibrate the screen.
To calibrate the touch screen:
1 Tap Start > Settings > Systems (tab) > Screen.
2 Tap Align Screen and follow the instructions to align the screen.
3 Tap ok.
Aligning the Touch Screen
If the touch screen is so out of alignment that you cannot open the
Start menu, you may need to align the screen menu using only the
keypad, or as a last resort you can perform a clean boot. For more
information about performing a clean boot, see “Clean Booting the
CN50” on page 80.
To align the touch screen using the keypad:
1 Press
b W (for the Start menu ~).
2 Press
d to select Settings and then press e.
3 Press
i until the Personal tab is selected.
4 Press
b > to select the System tab.
5 Use the arrow keys to choose Screen, and then press
e.
6 Tab to Align Screen and press
e.
7 Follow the instructions to align the screen.
8 Tap ok.
The 802.11 radio is connected to the wireless network.
Icon Description
Note: If the touch screen is so out of alignment that you cannot open
the Start menu, you can try to align the screen menu using the keypad.
For help, see the next procedure.