User's Manual
Table Of Contents
- Before You Begin
- Chapter 1 - Using the CN50
- Chapter 2 - Connecting and Configuring the CN50
- Configuring the CN50
- Connecting to a PC
- Connecting to Your Network
- Configuring Wireless Security
- Configuring the Phone
- Connecting to an ISP
- Connecting to a Network With a VPN Server
- Chapter 3 - Developing and Installing Applications
- Chapter 4 - Troubleshooting and Maintaining the CN50
- Appendix A - Specifications
- Appendix B - Default Settings
- Appendix C - Keypads and Keystrokes
- Appendix D - Imager Configuration Bar Codes
- Index
Appendix D — Imager Configuration Bar Codes
106 CN50 Mobile Computer for Windows Mobile 6.1 User’s Manual
Imager Configuration Bar Codes
Use the following bar codes to quickly configure the CN50 imager.
These bar codes allow you to enable or disable symbologies, reset to
factory defaults, and set predefined imager modes.
If you need to create a bar code for a specific setup, please download a
free copy of EasySet from the CN50 page on the Intermec web site at
www.intermec.com.
Basic Configuration Bar Codes
Imager Predefined Modes
Command Bar Code
Disable all symbologies
Reset to Factory Defaults
Postamble with Carriage Return
and Line Feed
Shut down and Reboot
Command Bar Code
1D codes only
Standard 1D and 2D codes