User's Manual

Chapter 7 — Configure the Computer
CN50 Mobile Computer for Windows Embedded Handheld 6.5 User Manual 69
Configure Bluetooth Communications
Your mobile computer is Bluetooth™-enabled, which lets you connect
to other Bluetooth devices, such as scanners, printers, or audio devices.
You need to turn on the Bluetooth radio before you can discover and
connect to other Bluetooth devices. By default, the radio is turned off.
1 Tap Start > Settings > Bluetooth > Mode.
2 Tap the Turn on Bluetooth check box.
3 (Optional) To make the CN50 visible to other Bluetooth devices,
tap Make this device visible to other devices.
4 Tap OK.
The Bluetooth radio maintains its state through a warm or cold
boot and maintains virtual COM ports. But, if you clean boot your
CN50 you need to recreate pairings to devices.
Note: You can also configure Bluetooth settings using Intermec
Settings. For more information, see “Use Intermec Settings On the
Computer” on page 60.