User's Manual

Chapter 3 — Use the Phone
CN50 Mobile Computer for Windows Embedded Handheld 6.5 User Manual 35
The activation process is slightly different for each CDMA carrier.
Your carrier sales contact and an Intermec representative can guide
you through the process.
After you supply the MEID to your carrier, they will respond with
values that you must enter using the Windows Mobile Activation
Wizard (if required). Some of the supported carriers do not require you
to enter any values. The following table shows the carriers, the correct
activation method to use, and the values that you need to activate your
phone (if required).
Values Required for CDMA Phone
After you complete the activation process, the settings you enter are
permanently stored in the CDMA module. Changing the OS will not
affect any of the settings or activation parameters stored in the WAN
modem.
Start the Activation Wizard
1 Tap Start > Phone.
2 In the Phone application, tap Menu > Activation Wizard.
Activate the Computer on Sprint
Use the following procedure to activate a CN50 programmed for
Sprint. Before activating the CN50, you need to set the local date and
time.
Carrier Activation Method Activation Values You Need
Sprint Sprint Hands Free MEID
Verizon
• Dial *22899
• Activation Wizard
None. All parameters are automatically
transferred wirelessly.
Note: After you complete the activation process with your carrier, you
can change your carrier selection using the Firmware Management
Tool (FMT). To download the FMT, go to www.intermec.com >
Products > Computers > Handheld Computers > CN50 >
Downloads tab.