User's Manual

Appendix A — Specifications and Default Settings
118 CN50 Mobile Computer for Windows Embedded Handheld 6.5 User Manual
EA11 Typical Reading Distances
Default Configuration
The following tables list the default values of the configuration
commands supported on the CN50. If you restore to factory default
settings, the CN50 uses these values.
The commands are grouped by function and reflect the organization
of Intermec Settings. You can configure your CN50 with Intermec
Settings from the SmartSystems Foundation console. For detailed
information on most of the commands, see the Intermec Settings
Command Reference Manual.
Data Collection Settings
Use data collection settings to configure the imager and to configure
the bar codes that you want the imager to be able to read.
Symbology Settings
Symbology Density Minimum Distance Maximum Distance
Code 39 0.125 mm (5 mil)
0.20 mm (8 mil)
0.25 mm (10 mil)
0.50 mm (20 mil)
1 mm (40 mil)
7.2 cm (2.8 in)
3.8 cm (1.5 in)
3.4 cm (1.3 in)
5 cm (2 in)
8 cm (3.1 in)
13.1 cm (5.1 in)
22.5 cm (8.8 in)
27 cm (10.5 in)
44 cm (17.2 in)
83 cm (32.4 in)
UPC/EAN 0.33 mm (13 mils) 5 cm (2 in) 32 cm (12.5 in)
Data Matrix 0.191 mm (7.5 mils)
0.254 mm (10 mils)
0.381 mm (15 mils)
6.3 cm (2.5 in)
4.8 cm (1.9 in)
*
17.3 cm (6.7 in)
22 cm (8.6 in)
29 cm (11.3 in)
PDF417 0.168 mm (6.6 mils)
0.254 mm (10 mils)
0.381 mm (15 mils)
6.25 cm (2.46 in)
4.5 cm (1.8 in)
4 cm (1.6 in)
15.4 cm (6 in)
23 cm (9 in)
37 cm (14.4 in)
Symbology Default Value
AustraliaPost Disable
Aztec Disable
BPO Disable
CanadaPost Disable
ChinaPost Disable