User's Manual

Chapter 1 — Using the CN3
CN3 Mobile Computer User’s Manual for Windows Mobile 6.1 15
Entering Characters on the Alphabetic and QWERTY Keypads
Press the key for the character to type that character. To type a
character or access a function printed on the keypad overlay, press
b
and then press the key for the character or function you want.
To type a single uppercase letter on the QWERTY and alphabetic
keypads, press
] and then the letter key.
Using Caps Lock
To type only uppercase letters, press b ] to enable the Caps Lock
feature. Press the same key sequence to disable Caps Lock. When Caps
Lock is enabled, the Caps Lock LED turns on.
While Caps Lock is enabled, you can still type orange characters by
pressing
b and then the key for that character. Caps Lock remains
enabled until you press
b ].
Entering Characters on the Numeric Keypads
To type a character or access a function printed in orange on the
keypad overlay, press
b and then press the key for the character or
function you want.
To type a character or access a function printed in green on the
keypad overlay, press
c and then press the key for the character or
function you want.
Above most of the keys, there is a grouping of three or four letters. To
type letters above a key, press
c and then press the key one to four
times depending on the placement of the letter.
For example, above
2 there are the letters “ABC”:
• To type “c”, press
c 2 2 2.
• To type “C,” press
c 1 and then press c 2 2 2.
Unlock a green or orange key. b or c once. Press the b or c once to unlock
the key and turn off the LED.
Using the Color-Coded Keys (continued)
To Do This Press Example