User's Manual

Chapter 1 — Using the CN3
CN3 Mobile Computer User’s Manual for Windows Mobile 6.1 5
The battery is fully charged when the battery status LED shows a
steady green.
To charge the battery
• Insert the battery into a quad battery charger, a single dock, or a
multidock, or attach external power to the CN3 with the battery
installed. For information on these accessories, see “Accessories”
on page 107.
For all charging methods, it takes 5 hours or less to fully charge the
CN3 batteries.
Changing the Battery
When you remove the battery from the CN3, an internal super
capacitor maintains your status, memory, and real-time clock for up
to 5 minutes. To maximize this time, suspend the CN3 before
changing the battery. For more information, see “Using the Power
Button” on page 17.
To remove and install the battery
1 Press and release the Power button to suspend the CN3.
2 Unsnap the top end of the handstrap.
3 Slide the battery release tab to release it from the CN3.
Removing the Battery in a CN3
Note: For the CN3NI, use a Phillips screwdriver to loosen and
tighten the battery set screw.
Battery release tab