User's Manual

Chapter 2 — Connecting and Configuring the CN3
54 CN3 Mobile Computer User’s Manual for Windows Mobile 6.1
Using Serial and USB Communications
You can use these CN3 accessories to transmit data to and receive data
from another device through serial or USB communications:
• AD10 single dock
• AV6 vehicle dock (AV9 for CN3e)
• AD11 multidock
• AA18 USB adapter
• AA17 RS-232 adapter
For more information about these accessories and how to order them,
see “Accessories” on page 107.
Managing Network Connections With iConnect
After you configure 802.11 or Ethernet network settings, you can use
the iConnect utility to:
• check the network connection status with a ping test.
• change basic network parameters.
• change Funk security profile settings.
• turn the 802.11 radio, Ethernet, phone, or Bluetooth radio on and
off.
To turn a network connection on or off
1 Tap the iConnect icon ( ) in the lower right corner of the Today
screen.
2 Choose Enable and then choose a network connection from the
list. A check mark next to the connection type indicates that the
connection is enabled.
To configure or change wireless security profile settings
1 Tap the iConnect icon ( ) in the lower right corner of the Today
screen.
2 Choose Tools > Wireless Settings. The Profile Wizard appears.
3 Choose a profile from the Profile list and change settings as
needed. For more information, see “Configuring Wireless
Security” on page 59.