User's Manual

Chapter 2 — Connecting and Configuring the CN3
CN3 Mobile Computer User’s Manual for Windows Mobile 6.1 51
4 Choose Yes. Intermec Settings refreshes the settings and returns
you to the main menu.
5 (Optional) To make the CN3 visible to other Bluetooth devices,
choose Communications > Bluetooth and choose Enable from
the Discoverable menu.
To make the CN3 connectable to other Bluetooth devices that
discover it, choose Communications > Bluetooth and choose
Enable from the Connectable menu.
6 Click OK.
The Bluetooth radio maintains its state through a warm or cold boot
and maintains virtual COM ports. But, if you clean boot your CN3
you need to re-connect to devices.
Connecting to a Bluetooth Scanner
You can connect to an Intermec Bluetooth scanner, such as the SF51
or SR61, by using the Wireless Scanning enabler.
To use the Wireless Scanning Enabler
1 Tap Start > Settings > the System tab > Wireless Scanning.
2 Tap Add Device.
3 To add a scanner by scanning a bar code on the CN3:
a Tap Quick Connect and then tap Next.
b Scan the bar code with the scanner and then tap Finish.