CK3 Mobile Computer CK3R, CK3X, CK3XN I User Manual
Intermec Technologies Corporation Worldwide Headquarters 6001 36th Ave.W. Everett, WA 98203 U.S.A. www.intermec.com The information contained herein is provided solely for the purpose of allowing customers to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec Technologies Corporation.
Contents Contents Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Global Services and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Warranty Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents How to Read Bar Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Read Bar Codes with the Imager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Connect a Bluetooth Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Connect a Tethered Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents About Network Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Configure 802.11 Radio Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 About Bluetooth Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Turn On the Bluetooth Radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Connect a Bluetooth Scanner . . . . . . . . . .
Contents How to Update the System Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Update Computers Using SmartSystems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Update the Computer Using a microSD Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 5 Troubleshoot and Maintain the Computer . . . . . . . . . . . . . . . . . . 75 About the Intermec Dashboard . . . . . . . . . . . . . . . . . . . . . . . . .
Contents B Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 Default Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106 Data Collection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106 RFID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents viii CK3R and CK3X Mobile Computer User Manual
Before You Begin Before You Begin This section provides you with safety information, technical support information, and sources for additional product information. Safety Information Your safety is extremely important. Read and follow all warnings and cautions in this document before handling and operating Intermec equipment. You can be seriously injured, and equipment and data can be damaged if you do not follow the safety warnings and cautions.
Before You Begin Disclaimer of warranties: The sample code included in this document is presented for reference only. The code does not necessarily represent complete, tested programs. The code is provided “as is with all faults.” All warranties are expressly disclaimed, including the implied warranties of merchantability and fitness for a particular purpose. Web Support Visit the Intermec website at www.intermec.com to download our current manuals (in PDF).
Before You Begin Related Documents Here are some related Intermec documents you might find useful: • Intermec Settings Command Reference Manual • Intermec Developer Library (IDL) Resource Kit Developer’s Guide The Intermec website at www.intermec.com contains our documents (as .pdf files) that you can download for free. To download documents 1 Visit the Intermec website at www.intermec.com. 2 Click the Products tab. 3 Using the Products menu, navigate to your product page.
Before You Begin 5869840; 5873070; 5877486; 5878395; 5883492; 5883493; 5886338; 5889386; 5892971; 5895906; 5898162; 5902987; 5902988; 5912452; 5923022; 5936224; 5949056; 5969321; 5969326; 5969328; 5979768; 5986435; 5987192; 5987499; 5992750; 6003775; 6012640; 6016960; 6018597; 6024289; 6034379; 6036093; 6039252; 6064763; 6075340; 6095422; 6097839; 6102289; 6102295; 6109528; 6119941; 6128414; 6138915; 6149061; 6149063; 6152370; 6155490; 6158661; 6164542; 6164545; 6173893; 6195053; 6234393; 6234395; 6244512;
1 About the Computer Features This Chapter introduces the CK3R and CK3X Mobile Computers with Windows® Embedded Handheld operating system. Use this chapter to learn about the basic features and functions of each computer, as well as the available accessories for it.
Chapter 1 — About the Computer Features About the CK3R and CK3X Mobile Computers The Intermec CK3R and CK3X Mobile Computers are ergonomically designed mobile computers built on the Microsoft® Windows® Embedded Handheld 6.5 operating system. The computers are lightweight, easy-to-use, and run most software designed for the Windows Embedded platform. In this manual, computer refers to models CK3R, CK3X, and CK3XNI, unless specifically stated.
Chapter 1 — About the Computer Features The CK3R Mobile Computer with a DHIB 802.11b/g/n radio installed is Wi-Fi® certified for interoperability with other 802.11b/g/n wireless LAN devices. The CK3X Mobile Computer with a DDIB 802.11a/b/g/n radio installed is Wi-Fi® certified for interoperability with other 802.11a/b/g/n wireless LAN devices.
Chapter 1 — About the Computer Features About the Battery Warning: The battery used in this device may present a fire or chemical burn hazard if it is mistreated. Do not disassemble it, heat it above 100 ºC (212 ºF) or incinerate it. Dispose of used batteries promptly. Keep away from children. The computer uses one of these rechargeable Lithium-ion battery packs as its main power source. CK3R/CK3X Battery Packs Battery Model Description Ships With AB17 2000 mAH (7.
Chapter 1 — About the Computer Features Battery Charge Times Charge times for the batteries depend on the battery and the charging method.
Chapter 1 — About the Computer Features 5 Press the battery release tab toward the battery until the battery is released, and then remove the battery. 6 Insert the top end of a fully charged battery into the computer and press down firmly on the bottom of the battery. The battery release tab makes a clicking sound when the battery is completely installed. About Battery Status Use the battery icon on the Title bar to view the power status of the battery.
Chapter 1 — About the Computer Features #BUUFSZ TUBUVT -&% Battery LED States LED State Description Steady green The computer is connected to a charger and the battery is more than 95% charged. Blinking red The battery is very low. The computer will soon go into Suspend mode. Charge or replace the battery. Steady red The computer is connected to a charger and the battery is charging. Amber There is a battery error.
Chapter 1 — About the Computer Features About Battery Life and Conservation Batteries that are stored outside the computer for long periods of time slowly discharge. Intermec recommends storing the battery in a charger to maintain battery performance. Battery Conservation Tips When You Want to: Do this to Save Battery Power: Use the computer and the low Connect the computer to an external battery status icon appears or the power source. Save your data, press the battery light turns on.
Chapter 1 — About the Computer Features About the Status LEDs The status LEDs turn on, turn off, or blink to indicate a specific activity on your computer. Location of Main Status LEDs Main Status LED Descriptions Callout LED Color Description 1 Notification Orange Windows Mobile 6.5 notification. 2 Good Read Green Good read of a bar code. Blinking red Bad read of a bar code. Blinking green The data collection engine is processing or starting up.
Chapter 1 — About the Computer Features Main Status LED Descriptions (Continued) Callout LED 2 3 Color Blue Intermec Ready-to-Work™ indicator Battery status Description If Intermec Terminal Emulator (ITE) is installed, the application is running and is connected to the host. If you do not have ITE, you can configure the Ready-to-Work indicator to turn on or off to indicate a healthy state. Blinking blue ITE is running but not connected to the host. The computer is unhealthy.
Chapter 1 — About the Computer Features Location of Orange and Green Key LEDs Orange and Green Key Status LEDs Callout LED Color Description 4 Orange key status Orange The Orange key is enabled. 5 Green key status Green The Green key is enabled.
Chapter 1 — About the Computer Features About the Keypad The computer comes with either an alphanumeric keypad or a numeric keypad. In low light conditions, an ambient light sensor automatically turns on the keypad backlight. To conserve power, you can disable the keypad backlight. The CK3R keypads do not have the PTT key.
Chapter 1 — About the Computer Features Numeric Keypad About the Color-Coded Keys Use the orange key and the green key to access additional characters, symbols, and functions printed on the keypad overlay. After you understand how to use the color-coded keys and key sequences, you can access all of the additional features printed on the keypad overlay. The default setting for the Green/Orange keys is Press once to lock.
Chapter 1 — About the Computer Features How to Use the Color-Coded Keys You Want to Press Example Use an orange key (LED turns on), character or function and then the key with the printed above a key. character or function printed above it (LED stays on). On the alphanumeric keypad, press then $ to open the device health dashboard. Use a green character key (LED turns on), or function printed and then the key with the above a key. character or function printed above it (LED stays on).
Chapter 1 — About the Computer Features About the Power Button When you press the Power button for about 2 seconds and hold it, the Intermec Power Options screen appears with a list of power options. If you do not select a power options setting, the currently selected action (the button outlined in bold) occurs after the timeout. Hibernate does not appear as an option if the computer is connected to external power.
Chapter 1 — About the Computer Features Intermec Power Options Option Description Hibernate (battery swap) High power saving mode. The computer saves the current system state, registry, and file system and then powers off all radios and internal devices. You can wake the computer by pressing the Power button or connecting the computer to external power. Suspend Medium power saving mode. The computer powers off all radios and internal devices not involved in saving the system state.
Chapter 1 — About the Computer Features About the Screen Backlight The computer has an ambient light sensor that automatically adjusts the brightness of the screen backlight to ensure that the screen is readable, while conserving power. By default, the screen turns off when there is no activity on the computer. To resume activity, press a key or tap the screen. You can configure the brightness and the timeout of the screen backlight.
Chapter 1 — About the Computer Features Configure the Screen Backlight Brightness Use Intermec Settings to configure the brightness of the screen backlight. 1 Tap Start > Settings > System > Intermec Settings. 2 Tap Device Settings > Backlight > Display. 3 Select how bright you want the backlight to be in normal, low, and bright light conditions. 4 Tap OK and exit Intermec Settings.
Chapter 1 — About the Computer Features 2 Press the PTT key to start the Notes application in audio note mode, and then tap the Record button to start recording. Or, press and hold the PTT key to start the Notes application in audio note mode and start recording. 3 To stop recording, release the PTT key. Use the Computer as a Two-Way Radio Use the Push To Talk (PTT) feature with an audio application, such as iTalkie™, to communicate with other computers over the 802.11 radio network.
Chapter 1 — About the Computer Features Predefined Mode For Scanning 1D Only 1D labels. 1D and 2D Standard (Default) All types of bar code labels. 1D and 2D Bright Environment In high ambient light, such as outdoors in sunshine. 1D and 2D Reflective Surface Glossy Labels. 1 Point the imager window at the bar code and hold the computer steady a few inches from the label. 2 Press the Scan button or pull the scan handle trigger. The illumination beam, laser pointer, or frame appear.
Chapter 1 — About the Computer Features When the imager successfully reads a bar code label, you hear a high beep, and the Good Read LED turns on briefly. 3 Release the Scan button or trigger. Connect a Bluetooth Scanner You can connect the computer to an Intermec Bluetooth scanner, such as the SF51, SG20, or SR61. Make sure that the Bluetooth radio in the computer is turned on before you try to connect to a scanner. 1 Tap Start > Settings > System > Wireless Scanning. 2 Tap Add Device.
Chapter 1 — About the Computer Features Connect a Tethered Scanner To connect a tethered scanner to your computer, use a CK3 RS-232 Adapter (Model AA21) and scanner RS-232 interface cable. For more information, contact your local Intermec representative. 1 Connect the CK3 RS-232 adapter to the tethered scanner using the scanner RS-232 interface cable. 2 Connect the adapter to the CK3. For help, see the CK3 Series RS-232 Snap-On Adapter (AA21) Instructions.
Chapter 1 — About the Computer Features 3 Open the card cover door. 4 Slide the microSD card cover towards the OPEN position and lift the cover.
Chapter 1 — About the Computer Features 5 Insert the microSD card. 6 Close the microSD card cover and slide it towards the LOCK position. 7 Close the card cover. 8 Use the stylus to press the Reset button in the battery compartment.
Chapter 1 — About the Computer Features 9 Install the battery. Press down firmly on the bottom of the battery, and make sure that the battery release tab is fully engaged. 10 Attach the handstrap. 11 Press the Power button. The computer cold boots. How to Transfer Files To transfer files you need to physically connect your mobile computer to your PC and install either Microsoft ActiveSync (Windows XP or earlier) or Windows Mobile Device Center (Windows Vista or Windows 7) on your PC.
Chapter 1 — About the Computer Features CK3 Options and Accessories You can use these accessories (sold and ordered separately) with the CK3. To order accessories, contact your local Intermec sales representative. CK3 Options and Accessories Accessory Description Battery (AB17, AB18, 1001AB01, 1001AB02) The AB17 standard battery, the AB18 extended battery, and the 1001AB01/1001AB02 smart battery, provide main power to the CK3.
Chapter 1 — About the Computer Features CK3 Options and Accessories (Continued) Accessory Description Scan Handle The scan handle provides you with an alternate way to hold the CK3 and scan bar code labels using a convenient scanning trigger. Vehicle Holder Use the vehicle holder to store your CK3 when you are not using it. Holster The holster provides you with a convenient way to carry your CK3 when you are not using it. There are holsters for a CK3 with a handle or without a handle.
Chapter 1 — About the Computer Features 28 CK3R and CK3X Mobile Computer User Manual
2 About the User Interface and Intermec Applications Use this chapter to learn about the Windows Embedded Handheld user interface and how to interact with the screen. You can also use this chapter to learn about the Intermec applications on your computer, as well as additional applications you can download.
Chapter 2 — About the User Interface and Intermec Applications About the User Interface The Windows Embedded Handheld 6.5 operating system provides a touch-friendly and easy to navigate user interface. About the Home Screen When you turn on your mobile computer, the Home screen is the first screen that appears after language provisioning is complete. The Windows Embedded Handheld 6.
Chapter 2 — About the User Interface and Intermec Applications Home Screen Navigation Bars (Continued) Callout Navigation Bar Description 2 Horizontal scroll bar A horizontal scroll bar appears when you tap the Title bar. The horizontal scroll bar makes it easy to access the applications associated with the Tile bar icons. The horizontal scroll bar also contains a magnifier which improves the touch experience by making parts of the screen large enough to tap with your finger.
Chapter 2 — About the User Interface and Intermec Applications About Screen Gestures The Windows Embedded Handheld 6.5 interface supports the use of gestures with the finger or stylus to move around the screen. Screen Gestures Gesture Description Tap Represents the left click of a mouse. Double-tap Represents the left double-click of a mouse. Hold Represents the right click of a mouse when you press and hold on the screen and a context menu appears.
Chapter 2 — About the User Interface and Intermec Applications Title Bar Status Icons (Continued) Icon Description Bluetooth headset is detected. ActiveSync connection is established. ActiveSync synchronization is in progress. There is a problem with the ActiveSync synchronization. Connected to a Wi-Fi network. Connected to a Wi-Fi network, and other networks are detected. Wi-Fi synchronization is in progress. Other Wi-Fi networks are detected. Information about a new Wi-Fi network is available.
Chapter 2 — About the User Interface and Intermec Applications Title Bar Status Icons (Continued) Icon Description The battery has a very low charge. The computer is attached to external power and the battery is charging. No battery is installed in the computer. Calibrate the Screen If the touch screen does not respond when you tap it with the stylus, you may need to align the screen using the stylus. 1 Tap Start > Settings > Systems > Screen.
Chapter 2 — About the User Interface and Intermec Applications Intermec Applications on the Computer Intermec applications help you configure, troubleshoot, and connect your computer to other devices and networks. Intermec Applications Available on the Mobile Computer Icon Application Description Bluetooth Audio Use the Bluetooth Audio application to connect to a Bluetooth headset or hands-free device.
Chapter 2 — About the User Interface and Intermec Applications Intermec Applications Available on the Mobile Computer (Continued) Icon Application Description Wireless Readers Use the Wireless Readers application to connect the computer to the IP30 RFID reader. Wireless Scanning Use the Wireless Scanning application to connect to a Bluetooth scanner. Downloadable Intermec Applications for the Computer You can download Intermec applications to extend the capabilities of the computer.
Chapter 2 — About the User Interface and Intermec Applications About Intermec HTML5 Browser Intermec HTML5 Browser provides a free open-platform application environment for Intermec computers. You can now run the same cross-platform web applications on an Intermec computer that you can run on iOS and Android devices. Intermec HTML5 Browser also lets you run applications while the computer is connected to the web or while it is offline.
Chapter 2 — About the User Interface and Intermec Applications About SmartSystems Intermec SmartSystems™ is an easy-to-use centralized software platform. With SmartSystems, IT Administrators and Integrators can perform hands-free provisioning and deploy and manage Intermec devices. SmartSystems provides a consistent way to manage Intermec devices located on-site or remotely to maximize IT resources and lower the total cost of ownership for Intermec data collection equipment.
3 Configure the Computer Use this chapter to learn about the available methods for configuring your computer and how to use Intermec Settings. You can also use this chapter to learn how to configure network communications and wireless security.
Chapter 3 — Configure the Computer How to Configure the Computer You can configure many parameters on the computer such as the bar code symbologies it decodes or the network settings. The values you set for these parameters determine how the computer operates. There are several ways to configure the computer: • • • • Directly on the computer. You can use Intermec Settings directly on the computer to change only the settings on that computer. Remotely using Intermec SmartSystems.
Chapter 3 — Configure the Computer Start Intermec Settings Use Intermec Settings to configure parameters for Intermec applications and some device-specific parameters. Intermec Settings is located on the System screen. • Tap Start > Settings > System > Intermec Settings. The Intermec Settings Main Menu appears. About the Structure of Intermec Settings Use the following tables to help find the parameters in Intermec Settings that you want to configure.
Chapter 3 — Configure the Computer Data Collection Menu Data Collection Options Parameters You Can Configure Internal Scanner • • • • • • • • • • • • • • Dock Tethered Scanner Bluetooth Scanner Enable Scanner Port Symbologies Scanner Settings Imager Settings Decode Security Tethered-Configure on Connect Enable Scanner Port Enable Scanner Auto-detect Symbologies Scanner Settings Scanner Port Settings Imager Settings Decode Security BT-Configure on Connect Communications Menu 42 Communications Optio
Chapter 3 — Configure the Computer Device Settings Device Settings Options Parameters You Can Configure Backlight Display and Keypad Settings Date and Time Date and Time Settings Good Read • • • • IDL Runtime Versions Read-only Keypad Button Remapping Power Management • • • • Profile Settings Application Whether these parameter options appear in Profile Settings: Screen • • • • Internal Scanner Tethered Scanner Bluetooth Scanner RFID Scanner Power Button Battery Power External Power Devi
Chapter 3 — Configure the Computer Note: The Printers menu displays settings for Bluetooth connected printers. The settings that appear in the menu are dependent on the printer that is paired with the device. The printer needs to be using the Wireless Printing application.
Chapter 3 — Configure the Computer Device Monitor Menu (Continued) Device Monitor Options Parameters You Can Configure Disabled Executables Read-only Device Wipe • Enable Wipe • Interval License Manager Menu License Manager Options Parameters You Can Configure About Read-only License Vault Read-only Virtual Wedge Menu Virtual Wedge Options Parameters You Can Configure Enable Virtual Wedge Enable Virtual Wedge Virtual Wedge Method Virtual Wedge Method (Adapt to application, character mode,
Chapter 3 — Configure the Computer Location Services Menu Location Services Options Parameters You Can Configure Server • Port • Enable Server Virtual GPS Virtual GPS Settings RFID Menu RFID Options Parameters You Can Configure Enable RFID Service • Enable RFID Service • Application Connection • Reader 1 How to Navigate in Intermec Settings You can easily navigate through the screens in Intermec Settings to find the parameters you need to configure: • • • • • • • Tap inside a text field to be ab
Chapter 3 — Configure the Computer 4 Type your password in the Enter: text box. 5 Retype your password in the Confirm: text box. 6 (Optional) Select the Use password to protect CAB Installation if you want to restrict the installation of .cab files. 7 Tap OK. Restore Default Settings The easiest way to restore default settings on your computer is to use Intermec Settings. You can restore all default settings on your computer or restore default settings for a specific menu item in Intermec Settings.
Chapter 3 — Configure the Computer Configure the Computer Remotely with SmartSystems You can use Intermec Settings from a SmartSystems console to remotely configure all the Intermec computers. For help using Intermec Settings, click Help > Contents. For information on all the parameters in Intermec Settings, see the Intermec Settings Command Reference Manual. 1 In the SmartSystems console, select a computer and then right-click on it. A list appears. 2 Select Start Intermec Settings.
Chapter 3 — Configure the Computer By default, the 802.11 radio is disabled. Use the following procedure to enable the Wi-Fi radio using Intermec Settings. 1 Tap Start > Settings > System > Intermec Settings. 2 From the Intermec Settings main menu, tap Communications > 802.11 Radio > Radio Enabled. 3 Select the Radio Enabled check box and tap OK. By default, the computer uses Funk security and enables DHCP.
Chapter 3 — Configure the Computer Turn On the Bluetooth Radio You need to turn on the Bluetooth radio in the CK3 before you can discover and connect to Bluetooth devices. By default the radio is turned off. 1 Tap Start > Settings > Bluetooth > Mode tab. 2 Tap Turn on Bluetooth. 3 (Optional) If you want this CK3 to be visible to other Bluetooth devices, tap Make this device visible to other devices. 4 Tap OK.
Chapter 3 — Configure the Computer Connect a Bluetooth Scanner You can connect the computer to an Intermec Bluetooth scanner, such as the SF51, SG20, or SR61. Make sure that the Bluetooth radio in the computer is turned on before you try to connect to a scanner. 1 Tap Start > Settings > System > Wireless Scanning. 2 Tap Add Device. 3 Select Quick Connect, Search, or Manual. Follow the instructions on the screen to add a wireless scanner.
Chapter 3 — Configure the Computer 3 On the Products page, click Computers > Handheld Computers > CK3 > the Downloads tab > Easyset ver. 5.x.x.x. 4 Follow the instructions to download and install EasySet. 5 Open EasySet and select Interface > Bluetooth > Connect/disconnect > Compose BT address. The Bluetooth Connect/disconnect - Compose BT address screen appears. 6 Enter the BT address listed on the labels that shipped with your computer. 7 Click OK.
Chapter 3 — Configure the Computer 1 Tap Start > Settings > System > Wireless Printing. 2 Tap Search to find a printer, or tap Manual to enter a device address. Follow the onscreen instructions to select the current Bluetooth printer. 3 (Optional) Tap Print Test Page. The printer prints out a test page.
Chapter 3 — Configure the Computer Connect a Bluetooth Audio Device Use the Bluetooth Audio applet to discover, activate, and connect to Bluetooth audio devices such as a headset. 1 Select Start > Settings > System > Bluetooth Audio. The Bluetooth Audio screen appears. 2 Follow the onscreen instructions to discover and connect to a Bluetooth audio device.
Chapter 3 — Configure the Computer Connect to a Wireless Reader You can connect the computer to a Bluetooth RFID reader, such as the IP30. Use Intermec Settings to configure or view information on your connected RFID readers. 1 Tap Start > Settings > System > Wireless Readers. 2 Tap Add Reader. 3 Select Search or Manual. Follow the onscreen instructions to add a wireless reader.
Chapter 3 — Configure the Computer About Serial and USB Communications You can use these accessories to transmit data to and receive data from another device through serial or USB communications: • AD20 single dock • AV10 vehicle dock • AA21 RS-232 adapter For information on these accessories, contact your local Intermec representative. About Wireless Security The computer provides these security solutions for your wireless network: • Wi-Fi Protected Access 2 (WPA2™) • Wi-Fi Protected Access (WPA) • 802.
Chapter 3 — Configure the Computer Load a Certificate To use transport layer security (TLS) with WPA or 802.1x security, you need a unique client certificate on the computer and a trusted root certificate authority (CA) certificate. 1 Start Intermec Settings. 2 Select Communications > 802.11 Radio > Certificates. 3 Tap Import Certificates. 4 To import a certificate chain: a Tap the Import PFX tab. b Next to the Select pfx to import field, tap <<<. c Find and select the root certificate.
Chapter 3 — Configure the Computer d When you are prompted to load the root certificate, tap OK. e When the message box appears to let you know the certificate has been added, tap OK. How to Make Your Security Choice The computer supports Funk and Microsoft® security. Your security choice depends on your network security needs: • • Choose Funk security if you use the computer in a static environment that requires a high level of security. Funk security provides CCX v4.
Chapter 3 — Configure the Computer 7 To set the active profile, tap Active Profile and select a profile from the list. 8 Save your settings. Configure WPA or WPA2 Enterprise (802.1x) Security with Funk Security Before you set WPA-802.1x or WPA2-802.1x security with Funk, you need to configure your authentication server and authenticators. To use TLS protocol, you also need to load a user and root certificate. On your computer, you need to enable the radio and set the date. 1 Start Intermec Settings.
Chapter 3 — Configure the Computer 2 Select Communications > 802.11 Radio > Funk Security. 3 Select a Funk security profile to configure. 4 Enter the SSID. 5 For Association, select WPA or WPA2. The default encryption is TKIP or AES, respectively. 6 For 8021x, select None. 7 For Pre-Shared Key, enter the pre-shared key or passphrase: • Enter the pre-shared key (0x followed by 32 hexadecimal pairs) for your access point. • Enter the passphrase (8 to 63 ASCII characters) for your authenticator.
Chapter 3 — Configure the Computer 9 If you selected TLS, enter a User Name and Subject Name. 10 For Validate Server Certificate, select Yes. 11 Tap OK. Configure LEAP Security with Funk Security Before you set LEAP security, you need to enable the radio and set the date on your computer. 1 Start Intermec Settings. 2 Select Communications > 802.11 Radio > Funk Security. 3 Select a Funk security profile to configure. 4 Enter the SSID. 5 For Association, select Open, WPA, WPA2, or Network EAP.
Chapter 3 — Configure the Computer 8 Enter an ASCII key or hex key value for each key you want to use (Key 1 through Key 4): • For 64-bit WEP, enter a 5-byte value: 5 ASCII characters or 0x followed by 5 hexadecimal pairs. • For 128-bit WEP, enter a 13-byte value: 13 ASCII characters or 0x followed by 13 hexadecimal pairs. 9 Select the Transmit key you want to use to transmit data. 10 Tap OK.
Chapter 3 — Configure the Computer Configure WPA or WPA2 Enterprise (802.1x) Security with Microsoft Security Before you set WPA-802.1x or WPA2-802.1x security with Microsoft, you need to configure your authentication server and authenticators. To use TLS protocol, you also need to load a user and root certificate. On your computer, you need to enable the radio and set the date. 1 Start Intermec Settings. 2 Select Communications > 802.11 Radio > Microsoft Security. 3 Enter the Network name (SSID).
Chapter 3 — Configure the Computer 3 Enter the Network name (SSID). 4 For Infrastructure Mode, select Infrastructure. 5 For Association, select WPA-PSK or WPA2-PSK. The default encryption is TKIP or AES, respectively. 6 For Pre-Shared Key, enter the pre-shared key or passphrase: • Enter the pre-shared key (0x followed by 32 hexadecimal pairs) for your access point. • Enter the passphrase (8 to 63 ASCII characters) for your authenticator.
Chapter 3 — Configure the Computer 11 If you selected TLS, enter a User Name and Domain. 12 Tap OK. Configure Static WEP Security with Microsoft Security Before you set static WEP security with Microsoft security, you need to enable the radio on your computer and set the date. Intermec recommends that you use WPA2-PSK instead of WEP if possible. 1 Start Intermec Settings. 2 Select Communications > 802.11 Radio > Microsoft Security. 3 Enter the Network name (SSID).
Chapter 3 — Configure the Computer 5 For Data Encryption, select Disabled. 6 Tap OK.
4 Manage the Computer Use this chapter to learn how to remotely update, configure, and monitor your Intermec computers. You will also find information on installing and developing software applications as well as how to upgrade the system software.
Chapter 4 — Manage the Computer About Managing the Computer in Your Network When you have multiple mobile computers and peripherals in your network, it is essential to have an easy way to manage updates, configure all the devices, and remotely troubleshoot problems. Intermec provides two free software solutions for managing your computers: • • • CloneNGo is a peer-to-peer license-free way to easily clone settings from one computer to another.
Chapter 4 — Manage the Computer The SmartSystems console can report on asset locations and battery status, making it easier to manage your computers. With a Provisioning license, SmartSystems can automatically push software, configuration settings, and other files to the computers. The license also enables ScanNGo, which makes connecting additional computers to your wireless network as easy as scanning bar codes. To purchase a Provisioning license, contact your local Intermec representative.
Chapter 4 — Manage the Computer You can have your .cab file place the application in any of these memory locations on the computer: Object store (root directory) The non-volatile Flash File Store. Applications and data in the Flash File Store will persist through a clean boot. The Flash File Store is erased if you reflash the operating system image. • The optional microSD card. Depending on available disk space, you may want to consider installing your application files on the microSD card.
Chapter 4 — Manage the Computer Install Applications Using Microsoft Synchronization Software When you only have a few computers to update with applications, you can copy files using Microsoft synchronization software. This procedure assumes the Microsoft synchronization software is installed on your PC and is up and running. 1 Connect to the mobile computer through the synchronization software. 2 Copy the .cab files from your development PC to the mobile computer. 3 Reboot or cold boot the computer.
Chapter 4 — Manage the Computer How to Launch Applications Automatically There are two ways to launch applications automatically on a cold boot: • • Set up your application .cab file to place a shortcut to the application in the \Windows\StartUp directory at install time. Use AutoRun to start your application at boot time. AutoRun ships on the computer and automates other operations. At boot time, AutoRun executes any commands found in its data file, Autouser.dat.
Chapter 4 — Manage the Computer After you have located these items, you can update your mobile computer using SmartSystems. 1 Open the SmartSystems console. 2 Make sure the computer is discovered. 3 Make sure the computer is in a powered dock or that power management is disabled. 4 Download the SmartSystems bundle to your PC. 5 Double-click the SmartSystems bundle on your PC to extract the update files to the software vault.
Chapter 4 — Manage the Computer The computer supports microSD cards that hold up to 2 GB of information when you are updating the computer. The microSD card slot is located in the battery compartment. 1 Insert the microSD card into a microSD adapter card and then place it in the SD card reader connected to your PC. 2 On your desktop PC, navigate to the download location and select the folder with the AutoFlash.img file that contains the update you want to install.
5 Troubleshoot and Maintain the Computer Use this chapter to find answers to any problems you may encounter while using the computer. You will also find information on routine maintenance.
Chapter 5 — Troubleshoot and Maintain the Computer About the Intermec Dashboard The Intermec Dashboard provides proactive monitoring of your computer to prevent downtime. Using Intermec Dashboard, you can easily see the health of the computer and help pinpoint the source of a problem to determine if it is hardware or software related. It is highly integrated with SmartSystems. You can also use SmartSystems to remotely monitor the health of your computers. For help, see the SmartSystems help.
Chapter 5 — Troubleshoot and Maintain the Computer About Troubleshooting the Computer These troubleshooting tables may help you fix some common problems you may experience with your computer. These tables group solutions for the Wi-Fi connection, 802.1x security, the imager, and general operation of the computer. Note: If you send the computer in for service, it is your responsibility to save the computer data and its configuration.
Chapter 5 — Troubleshoot and Maintain the Computer Check Wi-Fi Network Status If you have trouble connecting to your Wi-Fi wireless network: • Make sure you have correctly set network parameters on the CK3. • Check your wireless security settings. Follow the next procedure to verify available access points and networks, check signal strength, and view other diagnostics. If you need to contact Intermec Product Support, this information can be helpful in troubleshooting wireless network connection issues.
Chapter 5 — Troubleshoot and Maintain the Computer c Tap Ping. The graph shows the amount of time it takes for the host to return the ping. Tap List to see this information in a list format. 5 Tap the RSSI tab to view the received signal strength of the host signal. The information box includes the current signal strength, host SSID name, MAC address, data rate, and transmit power. • Tap Mark to place an arrow marker above the graph. 6 Tap the Conf tab to set up a log file that lists the RSSI history.
Chapter 5 — Troubleshoot and Maintain the Computer 802.1x Security Problems and Possible Solutions (Continued) Problem Possible Solution The mobile computer does • The mobile computer may not be not appear to be communicating with the access point. Make authenticating and a sure the mobile computer network name network connection icon matches the access point network name does not appear on the (SSID). toolbar. • The access point may not be communicating with the server.
Chapter 5 — Troubleshoot and Maintain the Computer 802.1x Security Problems and Possible Solutions (Continued) Problem Possible Solution The mobile computer indicates it is not authenticated. Make sure that: • the User Name and Password parameters on the mobile computer match the user name and password on the authentication server. You may need to configure the password on both the mobile computer and the authentication server.
Chapter 5 — Troubleshoot and Maintain the Computer 3 Aim the scanner or imager at a bar code and tap and hold Press to Scan. After the computer reads the bar code, the computer beeps and the label data, data length, and symbology appear on the screen. 4 To view recommended settings, press the right arrow button. 5 To accept recommended settings, tap Apply. 6 Tap OK.
Chapter 5 — Troubleshoot and Maintain the Computer Problems Reading Bar Codes (Continued) Problem Possible Solution The scanner or imager cannot read the bar code. • Position the scanner beam so that it • • • • crosses the entire bar code label in one pass. Try to vary the scanning angle. Check the quality of the bar code label. Scan a bar code label that you know scans properly. Compare the quality of the two bar code labels. You may need to replace the label that you cannot scan.
Chapter 5 — Troubleshoot and Maintain the Computer Problems Using the Computer You can troubleshoot general problems while using the computer. Before you call Intermec Product Support, look for your problem in the next table, and try the possible solutions. Problems Using the Computer Problem Possible Solution You tap the screen and nothing happens. Align the screen. You press the Power button and • The battery may be completely nothing happens. drained. Replace or charge the battery.
Chapter 5 — Troubleshoot and Maintain the Computer Before you call Product Support, have this information ready: • • • • • • Configuration number (CN) and serial number (SN), printed on a label inside the battery compartment or shown on the Device Health dashboard under Information. Operating system version Power management settings Wireless security settings SmartSystems Platform Bundle (SSPB) version Intermec Terminal Emulation (ITE) version and protocol, available from the ITE main screen.
Chapter 5 — Troubleshoot and Maintain the Computer 3 Scroll down until you see the OS Version number. 4 Exit the Device Health Dashboard. How to Restart the Computer If the computer or an application locks up, or if the computer does not respond when you press the Power button, you may need to restart the computer. The computer uses the configuration currently saved in flash memory during the boot process.
Chapter 5 — Troubleshoot and Maintain the Computer 4 Replace the battery and the handstrap. 5 Press the Power button and wait for the computer to boot. When the cold boot is complete, the Home screen appears. Clean Boot the Computer Caution: A clean boot erases the memory in the mobile computer, including all applications and data files, with the expection of those found in the Flash File Store, or any removable storage. If the computer seems to be locked up, try cold booting it.
Chapter 5 — Troubleshoot and Maintain the Computer Clean the Computer To keep the computer in good working order, you may need to clean the imager window, color camera window, and the touch screen. Clean the windows and the touch screen as often as needed for the environment in which you are using the computer.
A Specifications 89
Appendix A — Specifications Physical and Environmental Specifications This section lists the physical and environmental specifications for the computer. Physical Dimensions Length: Width (at widest part): CK3R Height (at grip): CK3X Height (at grip): CK3R Weight (with 2000 mAh battery): CK3X Weight (with 5100 mAh battery): 21.6 cm (8.5 in) 8.3 cm (3.3 in) 2.8 cm (1.1 in) 3.6 cm (1.4 in) 401 g (14.1 oz) 499 g (17.
Appendix A — Specifications Temperature and Humidity Specifications Operating temperature: Storage temperature: Charging temperature: Relative humidity (operating): Environmental rating: -10°C to 50°C (14°F to 122°F) -20°C to 70°C (-4°F to 158°F) 5°C to 35°C (41°F to 95°F) 0 to 95% non-condensing IP54, Category 1 Screen Specifications • 240 x 320 pixels, 16-bit RGB • 8.9 cm (3.
Appendix A — Specifications Bar Code Symbologies • Infomail • Australia Post* • Intelligent Mail • Aztec* • Interleaved 2 of 5 • BPO (British Post 4-state)* • JapanPost* • Canada Post • Matrix 2 of 5 • Codabar • Maxicode* • Codablock A • Micro PDF417 • Codablock F • MSI • Code 11 • PDF417* • Code 39 • Planet* • Code 93 • Plessey • Code 128/GS1-128 • Postnet* • DataMatrix* • QR Code* • Dutch Post* • Standard 2 of 5 • EAN/UPC • SwedenPost • GS1 Composite* • Telepen • GS1 DataBar Expanded • TLC 39 • GS1 DataB
Appendix A — Specifications EA31 Typical Reading Distances - Extended Reading Range These typical reading distances are measured in an office environment (250 lux) for the EA31 standard model with Extended Reading Range activated. Extended Reading Range is enabled by default.
Appendix A — Specifications EA31 Imager Minimum Reading Distances Minimum reading distances are measured in the dark (0 lux). JO %BUB .BUSJY NJMT 1%' NJMT NN NJMT &"/ 61$ NN NJMT NN NJMT DN EA31 Minimum Reading Distances EA31 Minimum Reading Distances Symbology Density Minimum Distance Maximum Distance Code 39 0.10 mm/4 mils 0.
Appendix A — Specifications EA31 Minimum Reading Distances (Continued) Minimum Distance Symbology Density Maximum Distance DataMatrix 0.18 mm/7 mils 7 cm/2.76 in 0.25 mm/10 mils 5 cm/1.97 in 0.38 mm/15 mils 5.2 cm/2.05 in 14 cm/5.51 in 20 cm/7.87 in 29.5 cm/11.61 in PDF417 0.17 mm/6.6 mils 5.8 cm/2.28 in 0.25 mm/10 mils 4 cm/1.57 in 0.38 mm/15 mils 4.9 cm/1.93 in 17.5 cm/6.89 in 26.5 cm/10.43 in 37 cm/14.
Appendix A — Specifications EA31 Typical Reading Distances 96 Symbology Density Minimum Distance Maximum Distance Code 39 0.10 mm/4 mils 0.13 mm/5 mils 0.20 mm/8 mils 0.25 mm/10 mils 0.50 mm/20 mils 1 mm/40 mils 7.5 cm/2.95 in 6.5 cm/2.56 in 4 cm/1.57 in 3.5 cm/1.38 in 6.5 cm/2.56 in 12.5 cm/4.92 in 10.5 cm/4.13 in 13.5 cm/5.31 in 21 cm/8.27 in 25.5 xm/10 in 49 cm/19.29 in 90 cm/35.43 in EAN/UPC 100% 0.33 mm/13 mils 4.5 cm/1.77 in 30.5 cm/12.01 in DataMatrix 0.18 mm/7 mils 6.5 cm/2.56 in 0.
Appendix A — Specifications EA30 Typical Reading Distances - Extended Reading Range These typical reading distances are measured in an office environment (250 lux) for the EA30 standard model with Extended Reading Range activated. Extended Reading Range is enabled by default.
Appendix A — Specifications EA30 Area Imager Minimum Reading Distances Minimum reading distances are measured in the dark (0 lux). JO %BUB .BUSJY NJMT 1%' NJMT NN NJMT &"/ 61$ NN NJMT NN NJMT DN EA30 Minimum Reading Distances EA30 Minimum Reading Distances 98 Symbology Density Minimum Distance Maximum Distance Code 39 0.10 mm/4 mils 0.
Appendix A — Specifications EA30 Minimum Reading Distances (Continued) Minimum Distance Symbology Density Maximum Distance PDF417 0.25 mm/10 mils 5.5 cm/2.17 in 0.38 mm/15 mils 7 cm/2.76 in 25 cm/9.84 in 34 cm/13.39 in EA30 Imager Typical Reading Distances Minimum reading distances are measured in the dark (0 lux). JO %BUB .
Appendix A — Specifications EA30 Typical Reading Distances Symbology Density Minimum Distance Maximum Distance Code 39 0.10 mm/4 mils 0.13 mm/5 mils 0.50 mm/20 mils 1 mm/40 mils 9.5 cm/3.74 in 8 cm/3.15 in 6.5 cm/2.56 in 9.5 cm/3.74 in 11.5 cm/4.53 in 14.5 cm/5.71 in 50 cm/19.69 in 75 cm/29.53 in EAN/UPC 100% 0.33 mm/13 mils 6 cm/2.36 in 34 cm/13.39 in DataMatrix 0.18 mm/7 mils 7.5 cm/2.95 in 0.25 mm/10 mils 6 cm/2.36 in 0.38 mm/15 mils 5.5 cm/2.17 in 16.5 cm/6.5 in 23 cm/9.06 in 34.5 cm/13.
Appendix A — Specifications Ş Ş Ş Ş Ş Ş Ş Ş Ş Ş Ş Ş JO Ş Ş &"/ DPOUSBTU 61$ Ş Ş Ş Ş Ş Ş NN NJMT Ş NN NJMT NN NJMT Ş NN NJMT Ş DN EX25C Near-Far Range Imager 1D Minimum Reading Distances EX25C 1D Symbologies Minimum Reading Distances with 0.24 cm (0.
Appendix A — Specifications JO Ş Ş Ş Ş Ş Ş Ş Ş Ş Ş Ş Ş Ş Ş Ş &"/ DPOUSBTU 61$ Ş Ş Ş Ş Ş NN NJMT Ş NN NJMT NN NJMT Ş Ş NN NJMT Ş DN EX25C Near-Far Range Imager 1D Typical Reading Distances EX25C 1D Symbologies Typical Reading Distances with 0.24 cm (0.
Appendix A — Specifications JO NN NJMT DN DN NN NJMT DN NN NJMT DN NN NJMT DN EX25C Near-Far Range Imager 2D Typical Reading Distances EX25C 2D Symbologies Typical Reading Distances with 0.
Appendix A — Specifications 104 CK3R and CK3X Mobile Computer User Manual
B Default Settings 105
Appendix B — Default Settings Default Configuration The following tables list the default values of the configuration commands supported on the CK3. If you restore the CK3 to factory default settings, the CK3 uses these values. The commands are grouped by function and reflect the organization of Intermec Settings. For detailed information on most of the commands, see the Intermec Settings Command Reference Manual, available from the Intermec website at www.intermec.com.
Appendix B — Default Settings Symbology Settings (Continued) Symbology Default Value EAN/UPC Enable UPC A, UPC E, EAN 8, EAN 13 GS1 Composite Disable GS1 DataBar Expanded Disable GS1 DataBar Limited Disable GS1 DataBar Omni-Directional Disable Infomail Disable Interleaved 2 of 5 Disable JapanPost Disable Matrix 2 of 5 Disable Maxicode Disable Micro PDF417 Disable MSI Disable PDF417 Enable Planet Disable Plessey Disable Postnet Disable QR Code Disable Standard 2 of 5 Dis
Appendix B — Default Settings Scanner Settings Scanner Setting Default Value Scanner Model Internal Scanner Trigger Mode Level Aimer Mode Typical aimer Hardware Trigger Enable Trigger Timeout (sec) 2 Aiming Duration (msec) 500 Turn Off After Good Read Enable/One-shot Scanner Firmware Version Read-only Imager Settings 108 Imager Setting Default Value Predefined Modes 1D and 2D Standard Imager Decode Mode 2D Imager Lighting Mode Illumination LED Priority Lighting Goal 42 Illumin
Appendix B — Default Settings Decode Security Settings Decode Security Setting Default Value Consecutive Data Validation 0 Identical Consecutive Timeout 300 ms Different Consecutive Timeout 0 Center Decoding Disable Center Decoding Tolerance Disable RFID RFID Settings RFID Setting Default Value Enable RFID Service Enable Application Connection Settings Application Connection Setting Default Value Allow External BRI Connections Enable BRI TCP Port 2189 Enable Logging Disable Reader 1
Appendix B — Default Settings RFID Module Settings (Continued) 110 RFID Module Setting Default Value Dense Reader Mode Off LBT Channel 5 LBT Scan Enable On Field Separator Space ( ) ID Report Off No Tag Report Off Report Timeout 0 ms Timeout Mode Off ID Timeout 100 ms Antenna Timeout 50 ms ID Tries 1 Antenna Tries 3 Read Tries 3 Write Tries 3 Initialization Tries 1 Lock Tries 3 Select Tries 1 Unselect Tries 1 Initial Q 4 Field Strength dB 30 Session 2 Enable An
Appendix B — Default Settings Communications Communications Settings Communications Setting Default Value Device Name CK3xxxxxxxxxxxx 802.11 Radio Settings 802.11 Radio Setting Default Value Radio Enabled Off Security Choice Funk Security Radio Measurement 300 Radio Bands (CK3X only) b/g (2.
Appendix B — Default Settings Ethernet Adapter Settings IP Settings Default Value Current Device IP Address 0.0.0.0 DHCP Enable DHCP Client Identifier Null IP Address Null Subnet Mask 255.0.0.
Appendix B — Default Settings Device Settings (Continued) Device Setting Default Value Good Read One beep Backlight Settings Backlight Setting Default Value Normal Light Backlight Adjustment Normal Low Light Backlight Adjustment Normal Bright Light Backlight Adjustment Normal Keypad Backlight On Based on Light Level Light Level Low Keypad Settings Keypad Setting Default Value Center Scan Button Scanner Green/Orange Keys Lock Options Press Once to Lock Power Management Settings Power M
Appendix B — Default Settings Power Management Settings (Continued) Power Management Setting Default Value Sleep Face Down Enabled Sleep Portrait Disabled Sleep Reverse Portrait Disabled Profile Settings Application Settings Profile Settings Application Setting Default Value Always On Show Option in Profile Settings Maximize Battery Life Show Option in Profile Settings Normal Show Option in Profile Settings 1D Bar Codes Optimized Show Option in Profile Settings Bright Sunlight Show Optio
Appendix B — Default Settings Core Messaging Service Settings (Continued) Core Messaging Service Setting Default Value Port 62241 Keep Alive Ping Interval 30 Seconds Device Monitor Device Monitor Settings Device Monitor Setting Default Value Enable Device Health Data Collection On Enable Device Health Application On Enable Blue Light (LED) Off for Ready-to-Work Set Rule File Location \SmartSystems\HealthRules.
Appendix B — Default Settings Virtual Wedge Settings (Continued) Virtual Wedge Setting Default Value Date (YYYY-MM-DD) Disabled Time (HH_MM_SS) Disabled Tag Separator SP (space) User-Defined Tag Separator Null End of Message CRLF (Return-Line Feed) User-Defined End of Message Null RFID Reader Grid Null Location Services Location Services Settings 116 Location Services Setting Default Value Port 9569 Enable Server Disable CK3R and CK3X Mobile Computer User Manual
C Keypads and Keystrokes 117
Appendix C — Keypads and Keystrokes Characters and Functions on Keypads Use these tables to learn how to enter standard characters as well as other available characters and functions with the keypad. If a character or function does not have a sequence of keystrokes, it is only available through the soft input panel (SIP). You can access the SIP by tapping the keyboard icon on the touch screen.
Appendix C — Keypads and Keystrokes Alphanumeric Characters (Continued) Character Alphanumeric Keypad Numeric Keypad q 1 & r 2 & s 3 & t 4 & u 5 & v 6 & w 7 & x 8 & y 9 & z : & A ! ! %SC B ! " C ! # D ! $ E ! % F ! & G ! ' H ! ( I ! ) J ! * K ! + L ! , &LD%XIT M ! - N ! .
Appendix C — Keypads and Keystrokes Alphanumeric Characters (Continued) Character Alphanumeric Keypad Numeric Keypad R ! 2 & S ! 3 & T ! 4 & U ! 5 & V ! 6 & W ! 7 & X ! 8 & Y ! 9 & Z ! : & 0 1 2 3 4 5 6 7 8 9 Function Keys Character 120 Alphanumeric Keypad Numeric Keypad F1 & & F2 & & F3 & & F4 & & F5 & & CK3R and CK3X Mobile Computer User Manual
Appendix C — Keypads and Keystrokes Function Keys (Continued) Character Alphanumeric Keypad Numeric Keypad F6 % & F7 & & F8 ' & F9 ( & F10 ) & F11 * & F12 + & F13 , & F14 - & F15 .
Appendix C — Keypads and Keystrokes Special Functions (Continued) Character Alphanumeric Keypad Caps Lock Field Exit Numeric Keypad " &LD%X &LD%XIT Up Arrow ! Down Arrow ! Left Arrow ! Right Arrow ! Control ) %SC Alt Depending on your computer model, some of the following characters or functions will not be printed on the keypad.
Appendix C — Keypads and Keystrokes Other Available Characters and Functions (Continued) Character or Function Alphanumeric Keypad ? 4 ; & / & - Numeric Keypad %SC [Enter] \ & = & N/A ‘ %SC N/A + [Enter] N/A [ " N/A . # ] $ N/A , 8 N/A ‘ 9 N/A “ : N/A Volume Down OK Volume Up Soft Key 1 Soft Key 2 The following ITE functions are only operational when you are using the ITE application.
Appendix C — Keypads and Keystrokes Intermec Terminal Emulation (ITE) Functions (Continued) Character or Function Alphanumeric Keypad System Request 3 Home # Attention ! &LD%XIT Reset Clear Roll Down Previous Screen Next Screen ( Page Left 5 Page Up / Page Down 0 Page Right 6 ' Roll Up 124 Numeric Keypad Field + Field - CK3R and CK3X Mobile Computer User Manual
Worldwide Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com © 2012 Intermec Technologies Corporation. All rights reserved.
