Spec Sheet

Physical Description
The CK3 mobile computer is a handheld, ruggedized,
battery-powered, key-based computing device
consisting of a color, QVGA resolution screen with
touch and stylus input, Flash-based program storage,
expansion capability for data storage (micro-SD), BT,
802.11a/b/g radio communication, and connectivity
through USB Host and USB Client.
Operating System
Windows Mobile 6.1 Classic Edition
Physical Characteristics
Length: 216.6 mm (8.53 in.)
Width: 83.6 mm (3.29 in.) – display area
Width: 61.0 mm (2.40 in.) – grip area
Height:36.2 mm (1.43 in.) – grip area
Weight: 453 grams (16.0 oz.) – standard battery pack
Weight: 566 grams (20.0 oz.) – extended battery pack
Hardware
Microprocessor: Intel® XScale PXA270 / 520 MHz
RAM: 128MB
FlashROM: 512MB H3 Disk on-chip FLASH
Memory/StorageExtension: Micro SDIO card slot,
user accessible
Integrated Scanning Options
1D linear imager
2D area imager
2D near-far, auto-focusing area imager
Copyright © 2012 Intermec Technologies Corporation.
All rights reserved. Intermec is a registered trademark of
Intermec Technologies Corporation. All other trademarks
are the property of their respective owners.
611896-06/12
In a continuing eort to improve our products, Intermec
Technologies Corporation reserves the right to change
specifications and features without prior notice.
Power
StandardBatteryPack: Removable, rechargeable
Lithium-Ion; 3.7V, 2000mAh (7.4 Watt-hours)
ExtendedBatteryPack: Removable, rechargeable
Lithium-Ion; 3.7V, 5100mAh (18.5 Watt-hours)
BatteryLife: Application dependent
RechargingTime: 7 hours or less at 0ºC - 45ºC
Environment
OperatingTemp: -10º C to +50º C
StorageTemp:-20º C to +70º C
EnvironmentalProtection: IP54 compliant
DropSurvival:1.5 m (5ft.) to concrete per MILSTD 810G
Humidity:5 to 95%, non-condensing
ElectrostaticDischarge: ±8 KV Contact
and ±15 KV Air Discharge
Display
3.5” (89 mm) QVGA (240 x 320 pixel)
64K color transflective TFT -LCD with
LED backlight with touch panel
Keypad Options
• 51-key Full-alphanumeric
• 38-key Function Numeric
• 28-key Numeric
all with LED backlighting and laser etched keycaps
Software
SmartSystems out of the box functionality with
integrated solutions from leading third party data
and device management products.
Connectivityoptions: Real-time or batch;
wired or wireless.
IntermecDeveloper’sLibrary(IDL): Integrates
with leading development environments; supports
device-specific features, bar code scanning, printing,
communications, and configuration control. Provides
C, .NET(VB.NET and C#), JAVA, and Web interfaces
DevelopmentEnvironments:Microsoft Visual Studio,
.NET compact Framework, JVM
BrowserSupport: Microsoft Internet Explorer Mobile 6
TerminalEmulationSupport:Optional factory pre-load
of Intermec Client Pack (ITE & IB)
Standard Communications
• USB Host and Client
• Ethernet via single dock with separate Ethernet
adapter module
• Ethernet quad dock
• Bluetooth® Class 2, v2.0 + EDR
• RS232 Serial via snap-on adapter, vehicle dock
Wireless LAN Standards Compliant
IEEE 802.11a (5 GHz – OFDM)
IEEE 802.11g (2.4 GHz – OFDM)
IEEE 802.11b (2.4 GHz – DSSS)
Data Rates
Up to 54 Mbps for 802.11a
Up to 54 Mbps for 802.11g
Up to 11 Mbps for 802.11b
Power Output
100 mW maximum
Security
WEP, WPA, 802.1x (EAP-TLS, TTLS, LEAP, PEAP),
802.11i
Certications:Wi-Fi, WPA2, Cisco Compatible (CCX)
Wireless PAN
Integrated Bluetooth® Class 2, V2.0 + EDR
compatible module for wireless
Audio Support
Internal speaker & MIC, headset support through snap-
on adapter
RFID Support
Ready to accommodate field-attachable RFID reader
handle via wired (USB) or Bluetooth
Accessories
AC Power Supply, snap-on auto adapter; snap-on
RS232 Adapter (power on pin-9); USB Host/Client
single dock with spare battery charging cavity; single
dock (requires separate Ethernet module); Ethernet
quad dock; charge-only quad dock; quad External
battery charger; Powered Vehicle Dock; Non-
Powered Vehicle Dock; field-attachable scan handle;
screen protector kit; tethered stylus kit; hand strap
replacement kit; battery charger adapter for IP30
batteries; holster.
Regulatory Approvals/Compliance
The CK3 Series includes CK3A, CK3A1,
CK3N, CK3N1, CK3C, CK3C1 models
Safety: cULus Listing, GS
EMC:FCC Part 15 - Class B, ICES-
003 Class B, EN 55022 Class B
Radio: FCC Part 15.247, Industry
Canada RSS-210, EN 300 328
Other: Compliant with all applicable EU
Directives - EMC, Low Voltage, R&TTE, vehicle,
WEEE, RoHS, Packaging & Waste Packaging
Contact your local Sales Representative
for other country specific approvals
Non-Incendive Version
CK3N configuration consists of Model CK3NI
Suitable for use in Division 2 locations
Safety: cULus Listing - ISA/ANSI 12.12.01
Gases: Class I - Groups A, B, C, D
Dusts: Class II - Groups F, G
Fibersandyings: Class III
MaxAmbient: 50°C T6
The CK3 meets rugged, standards-based
environmental specifications for the
rigors of warehouse use, but in a slim,
well-balanced form factor appropriate
for an in-store setting. The CK3 has
uniquely combined an 89mm (3.5 in)
QVGA display with a keyboard design
comfortable enough for single-handed use.
Mobile worker productivity can be
boosted when the CK3 is coupled with
the convenience of Intermec mobile
printers, such as the PB42 receipt
printer and PB50 label printer.
North America
Corporate Headquarters
6001 36th Avenue West
Everett, Washington 98203
Phone: [phone]
Fax: [phone]
North Latin America
Headquarters Oce
Mexico
Phone: [phone]
Fax: [phone]
South Latin America
Headquarters Oce
Brazil
Phone: [phone]
Fax: [phone]
Europe/Middle East &
Africa Headquarters Oce
Reading, United Kingdom
Phone: [phone]
Fax: [phone]
Asia Pacific
Headquarters Oce
Singapore
Phone: [phone]
Fax: [phone]
Internet
www.intermec.com
Worldwide Locations:
www.intermec.com/locations
Sales
Toll Free NA: [phone]
Toll in NA: [phone]
Freephone ROW:
00 800 4488 8844
Toll ROW: [phone]
OEM Sales
Phone: [phone]
Media Sales
Phone: [phone]
Customer Service
and Support
Toll Free NA: [phone]
Toll in NA: [phone]