User's Manual

Chapter 2 — Connecting and Configuring the CK3
CK3 Mobile Computer User’s Manual 41
To configure the network settings
• From the iConnect menu, tap Tools > Wireless Settings.
To test the connection of your CK3 against your network
• From the iConnect menu, select Tools > Ping Test.
Configuring Wireless Security
The CK3 provides four types of security for your wireless network:
• Wi-Fi Protected Access 2 (WPA2™)
• Wi-Fi Protected Access (WPA)
• 802.1x
• WEP
This section explains how to configure wireless security on your CK3.
If you choose not to use security, see “Disabling Security” on
page 52. Intermec recommends that you always implement security.
You must use either Funk or Microsoft security to implement your
security solution. For details, see the next section, “Choosing
Between Funk and Microsoft Security.”
If you are using WPA-802.1x, WPA2-802.1x, or 802.1x security, this
section also assumes that your authentication server and
authenticators are properly configured.
Note: Your security choice does not depend on your authentication
server. For example, you can choose Funk security if you use
Microsoft Active Directory
®
to issue certificates.