User's Manual
Table Of Contents
- Before You Begin
- Chapter 1 - Using the Computer
- Chapter 2 - Connecting and Configuring the CK3
- Managing the CK3 Using SmartSystems Foundation
- Connecting to a PC
- Configuring the CK3 Parameters
- Configuring the CK3 for Your Network
- Configuring Wireless Security
- Chapter 3 - Developing and Installing Applications
- Chapter 4 - Troubleshooting and Maintaining the CK3
- Appendix A - Specifications
- Appendix B - Default Settings
- Appendix C - Keypads and Keystrokes
- Index
Chapter 1 — Using the Computer
CK3 Mobile Computer User’s Manual 3
The CK3 is available with the following features:
• 802.11b/g or 802.11a/b/g and Bluetooth
®
radio, standard
• 128 MB DRAM, 64 MB Flash
• 512 MB embedded SD Mass Storage Card
• Alphanumeric or numeric keypad
• Imaging options:
• EV12 linear imager
• EA20X extended range area imager
• EX25B or EX25C near-far range area imager
• Intermec Client Pack (Optional):
• Intermec Terminal Emulator, including 3270, 5250, and
VT/ANSI, and support for third-party TE applications
• Intermec Browser
Use this manual to understand how to use the features and options
available on the CK3. For information about Windows Mobile 6.1
applications installed on the CK3, refer to the online help.
Note: The radio also supports the 802.11d standard. The 802.11d
standard adds the requirements and definitions for 802.11 WLAN
equipment to operate in markets not served by the current
standard. For 802.11d support, you need to order the 802.11d
version of the CK3. For help, contact your local Intermec
representative.
Note: The Intermec Client Pack is not compatible with the new
large 28-key numeric keypad option.