Technologies Laptop User Manual

Network Support—Chapter 4
139700 Series Color Mobile Computer User’s Manual
IP
Provides the IP address which can be set as either DHCP (Dynamic Host Configuration Protocol)
or statically.
Link Indicates the spee d at wh ich a connection is made, the data rate of the last trans mitte d packet.
Power Indicates the power statu s of this 802.11b profile, such as “CAM,” “Auto,” or “PSP.”
Signal Identifies the radio signal s trength (in dBm) of signals coming from an access point.
TX Power Shows th e trans mit power (in milliwatts) at which transmiss i ons are made.
History:
This displays an active history of this radio module’s connection quality.
Friendly Indicator:
This indicates the general quality of the 802.11b or 802.11b/g connection.
Three filled dots indicates the best quality; two filled dots dictates good
quality; one filled dot is of fair quality; and when all three dots are empty,
the quality is considered poor. When this icon appears with a red line, the
radio is disconnected or nearly so from the access point.
802.11 CF CORE - Gen eral 802.11 CR CORE - De tail s
Details
Below are descriptions and meanings for each piece of information pro-
vided via the Details tab. Note the information is listed alphabetically.
Attach -Roam Cnt Includes the number of new associations made during the current session, due to roaming. The
number is reset on suspend/resume cycles .
CCX Status States the status of the CCX features, either enabled or disabled.
Desired SSID Identifies the preferred Service Set Identifier (SSID).
Driver Name Identifies the 802.11b or 802.11b/g driver installed on this 700 Color Computer.
Last 5 Supp Msgs Monitors and reports th e 802. 11 Se curity Supplicant activity.
Scanlist Indicates wheth er the Scan List option was e nabled or disabled.
Supplicant Status Monitors the 802.11 se curity activity on the client: “Running” or “Stopped.”