User's Manual 700 Series Color Mobile Computer
Intermec Technologies Corporation Corporate Headquarters 6001 36th Ave. W. Technical Communications Department 550 Second Street SE Everett, WA 98203 U.S.A. Cedar Rapids, IA 52401 U.S.A. www.intermec.com The information contained herein is proprietary and is provided solely for the purpose of allowing customers to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec.
Document Change Record This page records changes to this document. The document was originally released as Revision A. Revision Date Description of Change B 11/2002 Added information about the Siemens MC45 radio module, the tethered scanner, CAB extraction, FTP Server parameters, and Data Collection control panel applet imager options.
iv 700 Series Color Mobile Computer User’s Manual
Contents Contents Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xix Safety Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xix Do not repair or adjust alone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xix First aid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Resetting Your 700 Color Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Performing a Warm-Boot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Performing a Cold-Boot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Software Build Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Customizing Your 700 Color Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Adjusting Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Adding or Removing Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Microsoft ActiveSync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Microsoft Pocket Outlook . .
Contents 3 Companion Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pocket Word . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Creating a Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Typing Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Writing Mode .
Contents Installing Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using Microsoft ActiveSync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the FTP Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using a Storage Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents GSM/GPRS CORE Module (760 Computers with WAN Radios) . . . . . . . . . . . . . . . . 142 WAN Monitor — General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 WAN Monitor — Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 x Microsoft Phone Application (761 Computers with CDMA Radios) . . . . . . . . . . . . . . . . . . . . . Data Provisioning (Sprint) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Wireless Personal Area Networking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . About the Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 7 Internal Scanners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . For Units With PSM Build 3.00 or Newer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Scanner and Imager Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Internal Scanner Supported Symbologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Kernel I/O Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IOCTL_HAL_GET_DEVICE_INFO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IOCTL_HAL_ITC_READ_PARM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IOCTL_HAL_ITC_WRITE_SYSPARM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IOCTL_HAL_GET_DEVICEID . . . . . . . . . . . . . . . . . . . . . .
Contents Helper Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ConfigureProfile() . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EnableZeroConfig() . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . isZeroConfigEnabled() . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . isOrinoco() . . . . . . . . . . . . . . . . . . . .
Contents Data Collection Control Panel Applet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Symbologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Code 39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standard 2 of 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Codabar . . . . . . .
Contents Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents I Index Classes and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 404 General Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 410 Files Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents xviii 700 Series Color Mobile Computer User’s Manual
Before You Begin Before You Begin This section provides you with safety information, technical support information, and sources for additional product information. Safety Summary Your safety is extremely important. Read and follow all warnings and cautions in this document before handling and operating Intermec equipment. You can be seriously injured, and equipment and data can be damaged if you do not follow the safety warnings and cautions.
Before You Begin Safety Icons This section explains how to identify and understand dangers, warnings, cautions, and notes that are in this manual. You may also see icons that tell you when to follow ESD procedures and when to take special precautions for handling optical parts. A warning alerts you of an operating procedure, practice, condition, or statement that must be strictly observed to avoid death or serious injury to the persons working on the equipment.
Before You Begin Global Services and Support Warranty Information To understand the warranty for your Intermec product, visit the Intermec web site at www.intermec.com and click Service & Support. The Intermec Global Sales & Service page appears. From the Service & Support menu, move your pointer over Support, and then click Warranty. Disclaimer of warranties: The sample code included in this document is presented for reference only. The code does not necessarily represent complete, tested programs.
Before You Begin Who Should Read this Manual? This manual provides you with information about the features of the 700 Series Color Mobile Computer and how to configure, troubleshoot, and support it. You must be familiar with your host PC, your network, and your other Intermec equipment. Related Documents This table contains a list of related Intermec documents and their part numbers.
Before You Begin Patent Information Product is covered by one or more of the following patents: 4,882,476; 4,894,523; 4,953,113; 4,961,043; 4,970,379; 4,988,852; 5,019,699; 5,021,642; 5,038,024; 5,081,343; 5,095,197; 5,144,119; 5,144,121; 5,182,441; 5,187,355; 5,187,356; 5,195,183; 5,195,183; 5,195,183; 5,216,233; 5,216,550; 5,218,191; 5,227,614; 5,233,172; 5,241,488; 5,243,602; 5,258,606; 5,278,487; 5,288,985; 5,308,966; 5,322,991; 5,331,136; 5,331,580; 5,342,210; 5,349,678; 5,359,185; 5,371,858; 5,373,47
Before You Begin xxiv 700 Series Color Mobile Computer User’s Manual
1 Introduction This chapter introduces the 700 Series Color Mobile Computer, developed by Intermec Technologies Corporation to enhance wireless connectivity needs. This chapter contains hardware and software configuration information to assist you in making the most out of your 700 Color Computer. Note: “700 Color” pertains to 740, 741, 750, 751, 760, and 761 Computers unless otherwise noted.
Chapter 1 — Introduction Ambient Light Sensor Note: This information does not apply to the 730 Computer. The ambient light sensor turns on the display lighting when conditions warrant but automatically turns if off again as surrounding light increases. This conserves your 700 Color battery power. Ambient Light Sensor Ambient Light Sensor This illustration shows the 700 Color Computer with a numeric keypad (left) and an alphanumeric keypad (right).
Chapter 1 — Introduction Audio System The audio system consists of the speaker, internal microphone, and the external headset jack. Speaker A speaker capable of variable volume levels is located on the back of the computer. This speaker has a transducer volume of 85 dB min at 10 CM and a frequency range of 1–8 KHz. Speaker 700 Color Computer Speaker 730 Computer Warning: Do not place the speaker next to your ear when the speaker volume is set to “Loud” (maximum), or you may damage your hearing.
Chapter 1 — Introduction Microphone The built-in microphone is located on the bottom of the unit next to the Hirose docking connector. Charging/Docking connector Microphone This is the bottom of the 700 Color Computer. Note that the keypad is to the bottom in this illustration. External Headset Jack The external headset jack connects a mobile phone style headset to your mobile computer for use in noisy environments. The jack is a 2.
Chapter 1 — Introduction Battery The 700 Color Computer comes with a 14.4 Watt-hour, 7.2V, replaceable Lithium-Ion (LiIon) battery. The 730 Computer comes with an 8.8 Watt-hour, 3.7V, replaceable LiIon battery. To view the status of this battery, tap Start > Settings > the System tab > the Power icon > the Power tab to view the current status of both the main battery and the backup battery. Tap ok to exit this information. For Units With PSM Builds Older than 3.
Chapter 1 — Introduction If your computer shuts down because of low battery conditions, your computer does not operate. This is done to ensure that data is protected. Although the battery does protect the data against loss for several hours, you should connect your computer to a power source when you first detect a low battery condition. Your computer contains an internal super capacitor, a temporary power storage device, that protects data for up to ten minutes.
Chapter 1 — Introduction Beeper Note: Each time the 700 Color Computer is cold-booted, all default settings are restored unless registry storage is enabled. See page 129 for information about enabling the registry storage. For information about setting volume levels for screen taps, ActiveSync alert noises, etc., tap Start > Help > Pocket PC Basics, then select Notifications. Enable the Beeper To enable the beeper: 1 Tap Start > Settings > the Personal tab > Sounds & Notifications > the Volume tab.
Chapter 1 — Introduction Disable the Scanner Mute Note: This information does not apply to the 730 Computer. To disable the mute feature on the scanner. 1 Tap Start > Settings > the System tab > the Audio icon, then select User defined audio settings. 2 Tap the Input Mixing tab, then clear the SCAN Mute box. 3 Drag its slider bar to the appropriate level of loudness, with the left side being the most loud and the right side being the most quiet. Tap ok to exit this applet.
Chapter 1 — Introduction Select a Beeper Volume Note: The 730 Computer does not support the laser scanner. To determine your PSM Build version, tap Start > Programs > File Explorer > the Flash File Store folder > the PSMinfo text file. For Units With PSM Builds Older than 3.00 Do the following to select a beeper volume. 700 Color Computers built with a laser scanner have three options: Off, High, or Medium. 700 Computers built with an imager have just two: Beeper or Vibrate.
Chapter 1 — Introduction For Units With PSM Build 3.00 or Newer To select a beeper volume for the 700 Color Computer, tap Start > Settings > the System tab > the Intermec Settings icon. Tap the Device Settings option, tap (+) to expand Beeper, then tap (+) to expand Volume. Select an item, then close this option.
Chapter 1 — Introduction Disable the Beeper Do the following to disable the beeper: 1 Tap Start > Settings > the Personal tab > Sounds & Notification > the Volume tab. 2 Drag the System volume slider completely to the left to “Silent.” 3 Tap ok to exit this applet.
Chapter 1 — Introduction Keypad Instructions for the keypad include the backlight and keypress sequences. Backlight for Keypad Note: This information does not apply to the 730 Computer. You can configure your keypad to turn on a backlight to assist you when you are working in low lighting. To adjust the backlight for the keypad, tap Start > Settings > the System tab > Backlight. Use the left/right scroll arrows to move to and tap the Keyboard tab. Make your selection, then tap ok to exit this applet.
Chapter 1 — Introduction Key Sequences Use the following key sequences to enter characters into your 700 Color Computer using either a numeric keypad or an alphanumeric keypad. [Gold] or [Gold/White] Plane Keys The [Gold] b plane key (numeric keypad) or the [Gold/White] c plane key (alphanumeric keypad) provides you access to display controls, special characters, and Pocket PC options. Press the [Gold] b key or the [Gold/White] c key for each gold plane key stroke you wish to make.
Chapter 1 — Introduction Alphanumeric Keypad Note: This information does not apply to the 730 Computer. The following table lists sequences that use the [Gold/White] c plane key. See Chapter 2, “Windows Mobile 2003,” for information about the Pocket PC applications. Press the Keys To Do This [Gold/White] c I Toggle the backlight on or off (also goes through backlight power levels if held down) [Gold/White] c A Access the Pocket PC Record application (see Note).
Chapter 1 — Introduction Alpha (Blue) Plane Keys The alphabet can be entered with either the numeric keypad or the alphanumeric keypad. Below and on the next page are the key sequences. Numeric Keypad When you press F, the Scanning/Alpha LED (C) shows ‘red’ for the Alpha mode. The keypad stays in Alpha mode until you press F. To type a lowercase ‘c,’ press F 2 2 2 (the [2] key three times).
Chapter 1 — Introduction Alphanumeric Keypad When you press d, the Scanning/Alpha LED (C) lights ‘red’ to indicate Alpha mode. The keypad stays in the Alpha mode until you press d again. If you want to type a lowercase ‘c,’ press d C. If you want an uppercase “C,” press and hold the g key, then press C. Press b to enter a space.
Chapter 1 — Introduction LEDs The battery status LED B and the scanning/keypad shift and notification LED C turn red, green, or yellow. Battery Status LED LED Color and Action Description Steady Green Battery is more than 95% charged and unit is on charger. Blinking Red Battery is low. The speed of the blinking increases as the battery’s power gets increasingly lower. Red Main battery is low; or if charging, remains red until your 700 Color Computer reaches 95% charge status.
Chapter 1 — Introduction PSM Build Version The Persistent Storage Manager (PSM) is an area of storage which is embedded in a section of the system’s FLASH memory. This storage area is not erased during a cold-boot. It may, however, be erased during the reflashing process. In addition to storing applications and data files, you do have the option to store a persistent registry to the PSM region. To determine what PSM Build is on your 700 Color Computer, tap Start > Programs > File Explorer.
Chapter 1 — Introduction Resetting Your 700 Color Computer Performing a Warm-Boot Performing a warm-boot may be necessary to correct conditions where an application stops responding to the system. It does, however, unload all running programs. Press and hold the I/O key for about ten seconds, then the 700 Color Computer continues from the screen you were at before you performed the warm-boot.
Chapter 1 — Introduction Software Build Version To check to see if your 700 Color Computer has the latest software build, select Start > Internet Explorer > the Intermec logo. The latest software build version is displayed beneath the Version Information title. This information is useful should you need assistance. 730, 740, 750, 760 Units 761 Units with CDMA For Units With PSM Builds Older than 3.00 You can also view the latest software build by accessing the Unit Information control panel applet.
Chapter 1 — Introduction Storage Media Note: MultiMediaCards (MMCs) are not supported in 700 Color Computers. The 700 Color Computer supports both CompactFlash and Secure Digital storage cards. To access either card slot, locate the access door at the top of the 700 Color Computer, remove its two screws, then remove the door. See the 700 Color with Windows Mobile 2003 Quick Start Guide (P/N: 962-054-069) for more information. The 730 Computer only supports the Secure Digital storage card.
Chapter 1 — Introduction Vibrator Note: This information does not apply to the 730 Computer. If your 700 Color Computer is built with an imager or scanner and the vibrator is disabled, do the following instructions to enable the vibrator. If you are not able to enable the vibrator, then contact Customer Support. For information about setting volume levels for screen taps, ActiveSync alert noises, etc., tap Start > Help > Pocket PC Basics, then select Notifications.
Chapter 1 — Introduction For Units With PSM Build 3.00 or Newer Do the following to enable the vibrator for the 700 Color Computer. Tap Start > Settings > the System tab > the Intermec Settings icon. Tap the Device Settings option, tap (+) to expand Beeper, then tap (+) to expand Vibrate. Select an item, then close this option. Note: Information about the settings you can configure with the Intermec Settings control panel applet is described in the Intermec Computer Command Reference Manual.
Chapter 1 — Introduction Accessories The following accessories are available for the 700 Color Computer. Note that this is not a complete list. Contact your Intermec representative for information about these and other accessories that are not in this list.
Chapter 1 — Introduction Environmental: 730 740, 741, 750, 751, 760, 761 Operating Temperature -10° to 55°C (14° to 131°F) -20° to 60°C (-4° to 140°F) Storage Temperature -20° to 60°C (-4° to 140°F) -20° to 60°C (-4° to 140°F) Relative Humidity 5% to 95% noncondensing 5% to 95% noncondensing IP54 compliant IP64 compliant Drop Specifications 1.
Chapter 1 — Introduction Physical Dimensions: 730 740, 741, 750, 751, 760, 761 Length 178 mm (7.0 in) 191 mm (7.53 in) Width 89 mm (3.5 in) 90 mm (3.5 in) Height 38 mm (1.5 in) 50 mm (1.97 in) Weight 420 g (15 oz) 483-568 g (17-20 oz) depending on options Power: 730 740, 741, 750, 751, 760, 761 Lithium-Ion (LiIon), 3.6V, (1 x 2400 mAh cells), customer-replaceable LiIon, 7.2V, (2 x 2000 mAh cells), customer-replaceable 8.64 Watt-hours 14.
2 Windows Mobile 2003 This chapter introduces Microsoft Windows Mobile 2003 for Pocket PC. While using your 700 Color Computer, keep these key points in mind: S Tap Start on the navigation bar, located at the top of the screen, to quickly move to programs, files, and settings. Use the command bar at the bottom of the screen to perform tasks in programs. The command bar includes menus, icons, and the onscreen keyboard.
Chapter 2 — Windows Mobile 2003 Software Builds Do the following to determine which Intermec build of Windows Mobile 2003 is on your unit. 1 Select Start > Internet Explorer > the Intermec logo. 2 Note the “Software Build” information displayed beneath the Version Information title. 730, 740, 750, 760 Units 761 Units with CDMA 3 Tap the Close icon in the top right corner to exit the Internet Explorer.
Chapter 2 — Windows Mobile 2003 Where to Find Information This chapter describes your 700 Color Computer hardware, provides an overview of the programs on your 700 Color Computer, and explains how to connect your 700 Color Computer to a desktop, a network, or the Internet. For instructions on setting up your 700 Color Computer and installing ActiveSync, see the Quick Start Guide. The following is a guide to more information to assist you use your 700 Color Computer.
Chapter 2 — Windows Mobile 2003 Basic Skills Learning to use your 700 Color Computer is easy. This section describes the basic concepts of using and customizing your 700 Color Computer. Today Screen When you turn on your 700 Color Computer for the first time each day (or after four hours of inactivity), you see the Today screen. You can also display it by tapping the Start flag (shown left) and then Today. On the Today screen, you can see important information for the day. Tap to start a program.
Chapter 2 — Windows Mobile 2003 Programs You can switch from one program to another by selecting it from the Start menu. (You can customize which programs you see on this menu. For information, see “Adjusting Settings” on page 45.) To access some programs, tap Start > Programs, and then the program name. You can also switch to some programs by pressing a program icon. Your 700 Color Computer has one or more program icons located on the front or side of the computer.
Chapter 2 — Windows Mobile 2003 Navigation Bar and Command Bar The navigation bar is located at the top of the screen. It displays the active program and current time, and allows you to switch to programs and close screens. Tap to switch to a program that you recently used. Tap to switch to a program. Tap to see more programs. Tap to change device settings. Tap to see a Help topic for the current screen. Use the command bar at the bottom of the screen to perform tasks in programs.
Chapter 2 — Windows Mobile 2003 Pop-up Menus Use pop-up menus to quickly perform an action on an item. For example, you can use a pop-up menu to delete or make a copy of an item. To access a pop-up menu, tap and hold the item on which you want to perform the action. When the menu appears, tap the action you want to perform, or tap anywhere outside the menu to close the menu without performing the action. Tap and hold to display the pop-up menu. Lift the stylus and tap the action you want.
Chapter 2 — Windows Mobile 2003 Entering Information You can enter information on your 700 Color Computer in several ways, depending on the type of device you have and the program you are using: S Synchronizing Using Microsoft ActiveSync, synchronize or copy information between your desktop and 700 Color Computer. For more information on ActiveSync, see ActiveSync Help on your desktop. S Typing Using the input panel, enter typed text into the 700 Color Computer.
Chapter 2 — Windows Mobile 2003 When you use the input panel, your 700 Color Computer anticipates the word you are typing or writing and displays it above the input panel. When you tap the displayed word, it is inserted into your text at the insertion point. The more you use your 700 Color Computer, the more words it learns to anticipate. Tap a text box to display the currently selected input panel. Tap to insert anticipated word. To enter characters, tap them on the onscreen keyboard.
Chapter 2 — Windows Mobile 2003 If you want to use larger keys, tap the input panel arrow, tap Options, select “Keyboard” from the Input method drop-down list, then select Large keys. Using Block Recognizer Character recognition software gives you a fast and easy method for entering information in any program on your 700 Color Computer. Letters, numbers, and punctuation you write are translated into typed text. Tap the input panel arrow, then tap Block Recognizer. Write a letter in the box.
Chapter 2 — Windows Mobile 2003 Using Letter Recognizer With Letter Recognizer, you can write letters using the stylus just as you would on paper. Tap the input panel arrow, then tap Letter Recognizer. Write a letter in the box. When you write a letter, it is converted to typed text that appears on the screen. For specific instructions on using Letter Recognizer, with Letter Recognizer open, tap the question mark next to the writing area. Tap for assistance.
Chapter 2 — Windows Mobile 2003 Writing on the Screen In any program that accepts writing, such as the Notes program, and in the Notes tab in Calendar, Contacts, and Tasks, you can use your stylus to write directly on the screen. Write the way you do on paper. You can edit and format what you have written and convert the information to text at a later time. S Tap the Pen icon to switch to writing mode. This action displays lines on the screen to help you write. Tap to use your stylus like a pen.
Chapter 2 — Windows Mobile 2003 Converting Writing to Text You can convert words you write in print or cursive to text by tapping Tools > Recognize. If a word is not recognized, it keeps its original form. If you want to convert only certain words, tap Pen to disable the writing function, tap twice over the word or phrase to highlight, then tap Tools > Recognize. Select the text you want to convert and tap Recognize on the pop-up menu. The writing is turned into text. Tap to disable the pen function.
Chapter 2 — Windows Mobile 2003 Tips for getting good recognition: S Write neatly. S Write on the lines and draw descenders below the line. Write the cross of the “t” and apostrophes below the top line so they are not confused with the word above. Write periods and commas above the baseline. S For better recognition, try increasing the zoom level to 300% by using the Tools menu. Recognition does not work well below a 150% zoom level.
Chapter 2 — Windows Mobile 2003 Drawing on the Screen You can draw on the screen in the same way that you write on the screen. The difference between writing and drawing on the screen is how you select items and how they are edited. For example, you can resize selected drawings, while you cannot resize writing. Creating a Drawing S Cross three ruled lines on your first stroke. A drawing box appears. Subsequent strokes in or touching the drawing box become part of the drawing.
Chapter 2 — Windows Mobile 2003 Recording a Message In any program where you can write or draw on the screen, you can also quickly capture thoughts, reminders, and phone numbers by recording a message. In the Inbox program, you can add a recording to an e-mail message. In Calendar, Tasks, and Contacts, you can include a recording in the Notes tab. In the Notes program, you can create a stand-alone recording or add a recording to an open note.
Chapter 2 — Windows Mobile 2003 Using My Text When using Inbox or MSN Messenger, use My Text to quickly insert preset or frequently used messages into the text entry area. To insert a message, tap My Text and tap a message. S To quickly add common messages, tap My Text and tap a desired message. S To edit a My Text message, tap Tools > Edit My Text Messages. Tap the message you want to edit and enter new text at the bottom of the screen. Tap to select a prewritten message.
Chapter 2 — Windows Mobile 2003 Finding and Organizing Information The Find feature on your 700 Color Computer helps you quickly locate information. Tap Start > Find. Enter the text you want to find, select a data type, and then tap Go to initiate the search. Note: To quickly find information that is taking up storage space on your 700 Color Computer, select Larger than 64 KB in Type. You can also use the File Explorer to find files on your 700 Color Computer and to organize these files into folders.
Chapter 2 — Windows Mobile 2003 Customizing Your 700 Color Computer You can customize your 700 Color Computer by adjusting settings and installing additional software. Adjusting Settings You can adjust settings to suit the way you work. To see available options, tap Start > Settings > either the Personal tab or the System tab located at the bottom of the screen.
Chapter 2 — Windows Mobile 2003 Adding Programs Using ActiveSync Install the appropriate software for your 700 Color Computer on your desktop before installing it on your 700 Color Computer. 1 Determine your 700 Color Computer and processor type so that you know which version of the software to install. Tap Start > Settings > the System tab > About > the Version tab, then make a note of the information in Processor.
Chapter 2 — Windows Mobile 2003 Adding a Program to the Start Menu Tap Start > Settings > Menus > the Start Menu tab, and then the check box for the program. If you do not see the program listed, you can either use File Explorer on the 700 Color Computer to move the program to the Start Menu folder, or use ActiveSync on the desktop to create a shortcut to the program and place the shortcut in the Start Menu folder.
Chapter 2 — Windows Mobile 2003 Microsoft ActiveSync Visit the following Microsoft Web site for the latest in updates, technical information, and samples: www.microsoft.com/windowsmobile/resources/communities/default.mspx Using Microsoft ActiveSync, you can synchronize the information on your desktop with the information on your 700 Color Computer. Synchronization compares the data on your 700 Color Computer with your desktop and updates both computers with the most recent information.
Chapter 2 — Windows Mobile 2003 Once you have set up ActiveSync and completed the first synchronization process, you can initiate synchronization from your 700 Color Computer. To switch to ActiveSync on your 700 Color Computer, tap Start > ActiveSync. Note that if you have a wireless LAN card, you can synchronize remotely from your 700 Color Computer. For information about using ActiveSync on your desktop, start ActiveSync on your desktop, and then see ActiveSync Help. View connection status.
Chapter 2 — Windows Mobile 2003 Microsoft Pocket Outlook Microsoft Pocket Outlook includes Calendar, Contacts, Tasks, Inbox, and Notes. You can use these programs individually or together. For example, you can use e-mail addresses stored in Contacts to address e-mail messages in Inbox. Using ActiveSync, you can synchronize information in Microsoft Outlook or Microsoft Exchange on your desktop with your 700 Color Computer. You can also synchronize this information directly with a Microsoft Exchange server.
Chapter 2 — Windows Mobile 2003 Synchronizing Calendar Calendar items stored on your device can be synchronized with calendar items on your desktop or Microsoft Exchange Server. (Note that you can only synchronize information directly with an Exchange Server if your company is running Microsoft Mobile Information Server 2002 or later.) Calendar synchronization is automatically selected in ActiveSync. Calendar items entered on one computer are copied to the other during synchronization.
Chapter 2 — Windows Mobile 2003 What’s an All Day Event? An appointment can either be a normal appointment or an all day event, which lasts the full day or spans many days. Examples include a trade show, a vacation, or a seminar. You can also use all day events to schedule an annual event, such as a birthday or anniversary. In this case, change the Status box to Free (you may need to scroll to see it) so that it does not show time as busy in your calendar.
Chapter 2 — Windows Mobile 2003 What’s a Recurrence Pattern? If you have an appointment or task that you do on a regular basis, such as a weekly team meeting or a monthly status report, enter the item once and set a recurrence pattern for it. If the default patterns in the list are not what you need, you can create your own pattern using the wizard. Select your recurrence pattern from this dropdown list. Select to access the wizard with which to customize your recurrence.
Chapter 2 — Windows Mobile 2003 Month view displays symbols to indicate the types of appointments you have on a given day. An upward triangle indicates a morning appointment; a downward triangle indicates an afternoon appointment. If you have appointments in the morning and afternoon, a solid square is displayed. If you have an all day event not marked Free, a hollow square is displayed. This displays a morning appointment. This displays an all day event not marked Free.
Chapter 2 — Windows Mobile 2003 Creating or Changing an Appointment To create an appointment, tap New. To select a new date from a pop-up calendar, tap the display date. To enter or select a new time, tap the display time. Enter the appointment details, and when finished, tap OK to return to the calendar. If you are working in Day view, tap the time slot for the new appointment and then tap New to have the time automatically entered for you.
Chapter 2 — Windows Mobile 2003 Creating an All Day Event To create an all day event, do the following: 1 Tap New. 2 Tap All Day, then select Yes. Tap to select either Yes or No whether this is an all day event. Note: To change an all day event, switch to Day or Agenda view, tap the event listed at the top of the calendar, and then tap Edit. Change any appointment detail by tapping it and entering the new information. You cannot modify or create all day events with attendees on the 700 Color Computer.
Chapter 2 — Windows Mobile 2003 Setting a Reminder for an Appointment Do the following to set a reminder for an appointment in the calendar: 1 Tap the appointment, then tap Edit to change the appointment. 2 Tap Reminder and select Remind me. 3 To change how many minutes before the appointment you are reminded, tap the minutes displayed, then select the new minutes from a drop-down or enter the new minutes. Tap minutes to change hours, days, or weeks. Tap to select Remind me to enable the reminder feature.
Chapter 2 — Windows Mobile 2003 To choose how you are reminded, for example by a sound, tap Start > Settings > the Personal tab > the Sounds & Notifications icon. Adding a Note to an Appointment You can add written or typed notes and even recordings (if your device supports recordings) to an appointment. This is a good place for maps, drawings, and other detailed information. 1 In the calendar, tap the appointment, then tap Edit. 2 Tap the Notes tab to enter notes.
Chapter 2 — Windows Mobile 2003 Making an Appointment Recurring Do the following to make a recurring appointment: 1 In the calendar, tap the appointment, then tap Edit. 2 Tap Occurs and select a pattern from the list. Or, to create a new pattern, tap , and follow the steps in the wizard. Select your recurrence pattern from this dropdown list. Select to access the wizard with which to customize your recurrence.
Chapter 2 — Windows Mobile 2003 Assigning an Appointment to a Category 1 In the calendar, tap the appointment, then tap Edit. 2 Tap Categories. 3 On the Select tab, select the categories to which you want to assign the appointment. 4 To create a new category, tap the Add/Delete tab, enter the category name, then tap Add. The new category is automatically selected in the Select tab. 5 Tap ok to return to the appointment. A check mark indicates a selected category.
Chapter 2 — Windows Mobile 2003 Sending a Meeting Request Use Calendar to schedule meetings with people who use Outlook or Pocket Outlook. When attendees receive a meeting request, they can accept or decline the meeting. If they accept, the meeting is automatically added to their schedule. In addition, their response is sent back to you, and your calendar is updated. Before you can send a meeting request, you must enter e-mail addresses in Contacts Help and set up Inbox to send and receive messages.
Chapter 2 — Windows Mobile 2003 Finding an Appointment There are two ways to find an appointment: S Tap Start > Find, enter the appointment name, tap the Type arrow and select Calendar from the drop-down list, and then tap Go. S In the calendar, tap Tools > Categories and select the type of appointment you want displayed. To show all appointments again, tap Tools > Categories and clear all categories. Tap this to select from a drop-down list or enter a phrase.
Chapter 2 — Windows Mobile 2003 Changing Calendar Options In the calendar, tap Tools > Options. S To see appointment indicators, select icons to display in Show icons. You can choose to display indicators for such things as recurring appointments, appointments with notes, and appointments with reminders. Tap and hold an icon to see its name. S If you are having trouble reading the calendar, select Use large font. You may see less appointment information. Tap this to view larger text.
Chapter 2 — Windows Mobile 2003 Contacts: Tracking Friends and Colleagues To switch to Contacts on the 700 Color Computer, tap Start > Contacts. Contacts maintains a list of your friends and colleagues so that you can easily find the information you are looking for, whether you are at home or on the road. You can enter both personal and business information. If you use Microsoft Outlook on your desktop, you can synchronize contacts between your 700 Color Computer and your desktop.
Chapter 2 — Windows Mobile 2003 Creating a Contact 1 Tap New, then use the input panel to enter a name and other contact information. Scroll down to see all available fields. 2 To assign the contact to a category, scroll to and tap Categories and select a category from the list. In the contact list, you can display contacts by category. 3 To add notes, tap the Notes tab. You can enter text, draw, or create a recording.
Chapter 2 — Windows Mobile 2003 Viewing Contacts The contact list displays the contact name and the first primary phone number or e-mail address specified for that contact. Contacts are ordered by name of contact or company. S Tap the default letter (home, w ork, mobile, or e-mail) to the right of the contact to see additional phone numbers and e-mail addresses.
Chapter 2 — Windows Mobile 2003 Creating or Changing a Contact S To create a contact, tap New. To enter notes, tap the Notes tab. When finished, tap ok to return to the contact list. S To change a contact, tap it in the contact list, and then tap Edit. To cancel edits, tap Edit > Undo. When finished making changes, tap ok to return to the contact list. Note: If you enter a name with more than two words, the middle word is recorded as a middle name.
Chapter 2 — Windows Mobile 2003 Adding a Note to a Contact You can add written or typed notes and even recordings (if your device supports recordings) to a contact. Notes are handy for maps and drawings. 1 In the contact list, tap the contact. 2 Tap the Notes tab. For specific instructions, tap Start > Help > Notes to see Notes Help. These are controls for the recorder. Use your stylus to write or draw your information here. Tap to activate the keyboard. Tap to activate the writing pad.
Chapter 2 — Windows Mobile 2003 Assigning a Contact to a Category 1 In the contact list, tap the contact, and then tap Edit. 2 Scroll to and tap Categories. 3 On the Select tab, check the categories to assign to the contact. 4 To create a new category, tap the Add/Delete tab, enter the category name, then tap Add. The new category is automatically checked in the Select tab. 5 Tap ok to return to the contacts. A check mark indicates a selected category.
Chapter 2 — Windows Mobile 2003 Sending a Message to a Contact 1 In the contact list, tap and hold the contact. To select multiple contacts, tap and drag. Then, tap and hold the selected contacts. 2 On the pop-up menu, select Send Email or Send SMS, depending upon the type of message to send. Note: To send an e-mail message, you must have an e-mail address configured for the contact.
Chapter 2 — Windows Mobile 2003 Finding a Contact There are four ways to find a contact: S Tap Start > Find, enter the contact name (first, last, or middle), phone number, or address, select Contacts for the type, then tap Go. S From Contacts, start typing a contact name until you see it displayed on the screen. To show all contacts again, tap the text box at the top of the screen and clear the text, or tap the arrow to the right of the text box.
Chapter 2 — Windows Mobile 2003 Adding a Contact to Speed Dial You can create speed dials to call frequently-called numbers with a single tap. Before you can create a speed dial entry for a phone number, that number must already exist in Contacts. 1 From the Phone keypad, tap Speed Dial > New. 2 Tap the desired contact name and number. 3 In the Location field, tap the Up/Down arrows to select an available location to assign as the new speed dial entry.
Chapter 2 — Windows Mobile 2003 Tasks: Keeping a To Do List To switch to Tasks on your 700 Color Computer, tap Start > Tasks. Use Tasks to keep track of what you have to do. A variety of task information can display on the Today screen. If you use Microsoft Outlook on your desktop, you can synchronize tasks between your device and desktop. Select the category of tasks you want displayed in the list. Select the sort order of the list. Use this entry bar to assign a task quickly. Indicates a high priority.
Chapter 2 — Windows Mobile 2003 Creating a Task S To quickly create a task, enter text in the Tap here to add a new task box at the top of the screen. If you do not see this box, tap Tools > Entry Bar. S To create a task with detailed information, such as start and due dates, tap New. To enter notes, tap the Notes tab. You can enter a start date and due date or enter other information by first tapping the field. If the input panel is open, you need to hide it to see all available fields.
Chapter 2 — Windows Mobile 2003 Notes: Capturing Thoughts and Ideas To switch to Notes on your 700 Color Computer, tap Start > Notes. Notes helps you quickly capture your ideas, notes, and thoughts. You can create a note using written and typed text, drawings, and recordings. You can also share your notes with others through e-mail, infrared, and synchronization with your desktop. Tap to change the sort order of the list. Tap to open a note or play a recording.
Chapter 2 — Windows Mobile 2003 Synchronizing Notes Notes can be synchronized between your desktop and device either through notes synchronization or file synchronization. Notes synchronization synchronizes the notes on your 700 Color Computer with Outlook Notes on your desktop. File synchronization synchronizes all notes on your 700 Color Computer with the My Documents folder for the 700 Color Computer on your desktop.
Chapter 2 — Windows Mobile 2003 Inbox: Sending and Receiving E-mail Messages To switch to Inbox on your 700 Color Computer, tap Start > Inbox. You can receive Internet e-mail messages and SMS messages in Inbox. Internet e-mail messages are sent by using an address you receive from your Internet service provider (ISP) or your employer. SMS messages are sent and received through your wireless phone service provider by using a phone number as the message address.
Chapter 2 — Windows Mobile 2003 Managing E-mail Messages and Folders Each e-mail account and SMS account has its own folder hierarchy with five default folders: Inbox, Outbox, Deleted Items, Drafts, and Sent Items. The messages you receive and send through the mail account are stored in these folders. You can also create additional folders within each hierarchy. The Deleted Items folder contains messages that were deleted on the device.
Chapter 2 — Windows Mobile 2003 Connecting to a Mail Server In addition to synchronizing e-mail messages with your desktop, you can send and receive e-mail messages by connecting to an e-mail server using a modem or network card connected to your 700 Color Computer. You need to set up a remote connection to a network or an ISP, and a connection to your e-mail server. For more information, see “Getting Connected” on page 100.
Chapter 2 — Windows Mobile 2003 Downloading Messages from the Server In Inbox, tap Accounts > Connect to open a connection to the Internet or your corporate network, depending on the account. For more information, tap Start > Help > Connections to see Connections Help. 1 Tap Accounts and ensure that the account you want to use is selected (marked by a bullet.) 2 Tap Connect.
Chapter 2 — Windows Mobile 2003 Composing and Sending Messages To compose a message: 1 In the message list, tap New. 2 To select an account, tap the From list and select “ActiveSync,” “SMS,” or the desired e-mail account. 3 Enter the e-mail address or SMS address of one or more recipients, separating them with semicolons. To access addresses and phone numbers from Contacts, tap To. 4 Enter your message. To quickly add common messages, tap My Text and tap a desired message.
Chapter 2 — Windows Mobile 2003 Companion Programs The companion programs consist of Microsoft Pocket Word, Microsoft Pocket Excel, Windows Media Player, and Microsoft Reader. To switch to a companion program on your 700 Color Computer, tap Start > Programs, then tap the program name. Pocket Word Pocket Word works with Microsoft Word on your desktop to give you access to copies of your documents.
Chapter 2 — Windows Mobile 2003 You can enter information in Pocket Word in one of four modes (typing, writing, recording, and drawing), which are displayed on the View menu. Each mode has its own toolbar, which you can show and hide by tapping the Show/Hide Toolbar icon on the command bar. You can change the zoom magnification by tapping View > Zoom, then select the percentage you want. Select a higher percentage to enter text and a lower one to see more of your document.
Chapter 2 — Windows Mobile 2003 Writing Mode In writing mode, use your stylus to write directly on the screen. Ruled lines are displayed as a guide, and the zoom magnification is greater than in typing mode to allow you to write more easily. For more information on writing and selecting writing, see “Basic Skills” on page 30. With Space icon selected, drag to insert space. An arrow appears showing the space direction and size. Tap to highlight selected text.
Chapter 2 — Windows Mobile 2003 Drawing Mode In drawing mode, use your stylus to draw on the screen. Grid lines appear as a guide. When you lift your stylus off the screen after the first stroke, a drawing box indicating the boundaries of the drawing appears. Every subsequent stroke within or touching the drawing box becomes part of the drawing. For more information on drawing and selecting drawings, see “Basic Skills” on page 30. Resize an object by dragging the selection handles.
Chapter 2 — Windows Mobile 2003 Pocket Excel You can create and edit workbooks and templates in Microsoft Pocket Excel as you do in Microsoft Excel on your desktop. Pocket Excel workbooks are usually saved as .PXL files, but you can also save them in .XLS format. When you close a workbook, it is automatically named and placed in the Pocket Excel workbook list. You can attach a password to a workbook to help ensure privacy.
Chapter 2 — Windows Mobile 2003 Note: If your workbook contains sensitive information, you can protect it with a password. To do so, open the workbook, tap Edit > Password. Every time you open the workbook, enter a password, preferably one that is easy for you to remember but hard for others to guess. Tips for Working in Pocket Excel Note the following when working in large worksheets in Pocket Excel: S View in full-screen mode to see as much of your worksheet as possible. Tap View > Full Screen.
Chapter 2 — Windows Mobile 2003 1 Set up a connection on your 700 Color Computer, such as a modem or wireless connection, that enables you to connect to the Internet. 2 Set up an account in MSN Messenger. 3 Sign in to MSN Messenger. Note: To set up a free Hotmail account, go to http://www.hotmail.com. To set up a Microsoft Passport account, go to http://www.passport.com. To set up an Exchange account, see your network administrator.
Chapter 2 — Windows Mobile 2003 Signing In and Out S To sign in, tap anywhere on the screen. Follow the directions on the screen. S To sign out, tap Tools > Sign Out. S To sign in upon connecting, tap Tools > Options > General and select the Run this program upon connection box. S Signing in to an Exchange account may take several minutes depending upon your connection speed. Reducing the number of Exchange contacts decreases your sign-in time.
Chapter 2 — Windows Mobile 2003 Managing Contacts To be alerted each time you are added to a contact list, tap Tools > Options > the Privacy tab. S To block a contact from seeing your status and sending you messages, tap the contact and tap the right arrow. This moves the contact to the My Block List. S To unblock a contact, tap the contact and tap the left arrow. This moves the contact to the My Allow List.
Chapter 2 — Windows Mobile 2003 Sending a Message S Tap a contact to whom you want to send a message. Enter your message in the text entry area at the bottom of the screen and tap Send. To quickly add common messages, tap My Text and tap a desired message. S To invite another contact to an ongoing chat, tap Tools > Invite and tap a contact. S To see who is already chatting or to switch between chats, tap Chats. Enter a message. Tap to send message.
Chapter 2 — Windows Mobile 2003 Windows Media Player for Windows Mobile Use Microsoft Windows Media Player for Windows Mobile to play digital audio and video files that are stored on your 700 Series Computer or on a network. To switch to Windows Media Player on your 700 Color Computer, tap Start > Windows Media. Use Microsoft Windows Media Player on your desktop to copy digital audio and video files to your 700 Color Computer. You can play Windows Media and MP3 files on your Windows Mobile.
Chapter 2 — Windows Mobile 2003 Microsoft Reader Use Microsoft Reader to read eBooks on your 700 Color Computer. Download books to your desktop from your favorite eBook Web site. Then, use ActiveSync to copy the book files to your activated 700 Color Computer. The books appear in the Reader Library, where you can tap them in the list to open them. Each book consists of a cover page, an optional table of contents, and the pages of the book.
Chapter 2 — Windows Mobile 2003 3 To open a book, tap its title in the Library list. Tap to scroll through the Library list. Tap to select a sort order. Tap to open a book. Tap here to navigate to other parts of the Reader. Reading a Book Each book consists of a cover page, an optional table of contents, and the pages of the book. Navigation options are listed in the bottom portion of the cover page. The first time you open a book, go to the first page or to the table of contents, if there is one.
Chapter 2 — Windows Mobile 2003 Using Reader Features Reading a book electronically gives you several options not available with paper books. These options are available from any book page. Select text by dragging across the text on the page. Then, tap an option on the pop-up menu, as described here: Searching for Text Find text in a book by tapping Find on the pop-up menu. Enter the word you want to search for, and tap the desired Find option. Reader highlights found text on the page.
Chapter 2 — Windows Mobile 2003 Pocket Internet Explorer Use Microsoft Pocket Internet Explorer to view Web or WAP pages in either of these ways: S During synchronization with your desktop, download your favorite links and mobile favorites that are stored in the Mobile Favorites subfolder in Internet Explorer on the desktop. S Connect to an ISP or network and browse the Web. To do this, create the connection first, as described in “Getting Connected” on page 100.
Chapter 2 — Windows Mobile 2003 Mobile Favorites If you are using Microsoft Internet Explorer 5.0 or later on your desktop, you can download mobile favorites to your 700 Color Computer. Synchronizing mobile favorites downloads Web content to your 700 Color Computer so that you can view pages while you are disconnected from your ISP and desktop. Use the Internet Explorer plug-in installed with ActiveSync to create mobile favorites quickly.
Chapter 2 — Windows Mobile 2003 Using AvantGo Channels AvantGo is a free interactive service that gives you access to personalized content and thousands of popular Web sites. You subscribe to AvantGo channels directly from your 700 Color Computer. Then, you synchronize your 700 Color Computer and desktop, or connect to the Internet to download the content. For more information, visit the AvantGo Web site.
Chapter 2 — Windows Mobile 2003 Viewing Mobile Favorites and Channels 1 Tap the Favorites icon to display your list of favorites. 2 Tap the page you want to view. Tap the favorite you want to view. Tap to add or delete a folder or favorite link. The page that was downloaded the last time you synchronized with your desktop opens. If the page is not on your 700 Color Computer, the favorite is dimmed.
Chapter 2 — Windows Mobile 2003 Getting Connected You can set up connections to the Internet and corporate network at work to do such activities as browsing the Internet or intranet, sending and receiving e-mail and instant messages, and synchronizing information using ActiveSync. Connections can be made using a modem, wireless network, or Ethernet. You can use a modem connection to set up connections with an external modem, or through your mobile phone network using a cellular line or GPRS.
Chapter 2 — Windows Mobile 2003 1 Tap Start > Settings > the Connections tab > the Connections icon. In My ISP, tap Add a new modem connection. 2 Enter a name for the connection, such as “ISP Connection.” In the Select a modem list, select your modem type. If your modem type does not appear, try reinserting the 700 Color Computer into your modem dock. If you are using an external modem that is connected to your 700 Color Computer with a cable, select “Hayes Compatible on COM1.” Tap Next to continue.
Chapter 2 — Windows Mobile 2003 3 Enter the access phone number, then tap Next. 4 Enter the user name, password, and domain (if provided by an ISP or your network administrator), then tap Finish.
Chapter 2 — Windows Mobile 2003 5 Tap the Advanced tab from the Connections screen, then tap Select Location to specify your current location. These settings apply to all connections. Tap Use dialing rules, tap OK,then tap Edit to continue. 730, 740, 750, 760 Screens 741, 751, 761 Screens 6 Specify your current phone type. If your phone type is pulse dialing, check the Pulse dialing box. If your type is tone dialing (as most phone lines are), then clear the Pulse dialing box.
Chapter 2 — Windows Mobile 2003 To start the connection, start using one of the following programs. Once connected, you can: S Send and receive e-mail messages by using Inbox. Before you can use Inbox, you need to provide the information it needs to communicate with the e-mail server. For specific instructions, see “Connecting Directly to an E-mail Server” on page 116. S Visit Web and WAP pages by using Pocket Internet Explorer. For more information, see “Pocket Internet Explorer” on page 96.
Chapter 2 — Windows Mobile 2003 Creating a Modem Connection to Work 1 Tap Start > Settings > the Connections tab > the Connections icon. Tap Add a new modem connection beneath My Work Network to initiate this procedure.
Chapter 2 — Windows Mobile 2003 2 Enter a name for the connection, such as “Company Connection.” In the Select a modem list, select your modem type, then tap Next to continue. If your modem type does not appear, try reinserting your 700 Color Computer into your modem dock. S If using an external modem connected to your 700 Computer with a cable, select “Hayes Compatible on COM1.” S If using any type of external modem, select the modem by name.
Chapter 2 — Windows Mobile 2003 c Enter the main phone number, then tap Next to continue. 4 Enter the user name, password, and domain (if provided by an ISP or your network administrator). If a domain name was not provided, try the connection without entering a domain name, then tap Finish.
Chapter 2 — Windows Mobile 2003 Note: The following information applies when you have “Wireless 802.11” selected via the NDISTRAY pop-up menu (see page 134). Creating a Wireless Network Connection Microsoft Corporation’s wireless network configuration tool is called “Wireless Zero Config.” Intermec Technologies recommends that you use the Wireless Network control panel applet instead as it offers more security choices and exhibit better roaming behavior.
Chapter 2 — Windows Mobile 2003 2 Tap the Advanced tab > Network Card > the Wireless tab > Add New ... . 3 Tap the General tab, then enter a network name. If the network was detected, the network name is entered and cannot be changed. From Connects to, select to what your network is to connect. If you select “Work,” you can do a vpn connection or use proxy servers. If you select “The Internet,” you can connect directly to the internet.
Chapter 2 — Windows Mobile 2003 4 Tap the Network Key tab, then do the following: To Disable Authentication a Set Authentication to either “Open” if WEP keys are not required; or “Shared” when WEP keys are required for association. b Set Data Encryption to “Disabled.” To Enable WEP Encryption a Set Authentication to either “Open” if WEP keys are not required; or “Shared” when WEP keys are required for association. b Set Data Encryption to “WEP.
Chapter 2 — Windows Mobile 2003 Note: The following information applies when you have Enable Microsoft’s Wireless Zero Config checked via the Wireless Network control panel applet (see Appendix A, “Configurable Settings”). To Enable WPA Authentication (730, 751, 751, 761 Computers) a Set Authentication to “WPA.” See page 372 for information about WPA encryption. b Set Data Encryption to either “WEP” or “TKIP.” See page 372 for information about WEP and TKIP encryption.
Chapter 2 — Windows Mobile 2003 To Enable WPA Authentication Using a Preshared Key (730, 741, 751, 761 Computers) a Set Authentication to “WPA-PSK.” See page 372 for information about WPA encryption. b Set Data Encryption to either “WEP” or “TKIP.” See page 372 for information about WEP and TKIP encryption. c Enter the new Network key. 5 Tap the 802.1x tab, select either “PEAP” or “Smart Card or Certificate” for the EAP type, then tap Properties to adjust its settings.
Chapter 2 — Windows Mobile 2003 To connect only to networks you have already configured, clear Automatically connect to non-preferred networks. Tap ok to close this screen. Note: If you select to automatically connect to non-preferred networks, your device detects any new networks and provide you the opportunity to configure them. Creating a VPN Server Connection to Work A VPN connection helps you to securely connect to servers, such as a corporate network, via the Internet.
Chapter 2 — Windows Mobile 2003 1 Tap Start > Settings > the Connections tab > the Connections icon. Tap Add a new VPN server connection beneath My Work Network to initiate this procedure. 2 In Name, enter a name for the connection, such as a company’s name. In Host name/ IP, enter the VPN server name or IP address. Next to VPN type, select the type of authentication to use with your device: “IPSec/L2TP” or “PPTP.” If you are not sure which option to choose, ask your network administrator.
Chapter 2 — Windows Mobile 2003 3 Select the type of authentication. If you select A pre-shared key, enter the key provided by your network administrator. 4 Enter your user name, password, and domain name as provided by your ISP or network administrator. If a domain name was not provided, try the connection without entering a domain name. 5 You should not need to change any Advanced settings.
Chapter 2 — Windows Mobile 2003 Ending a Connection To disconnect, do one of the following: S When connected via modem or VPN, tap the Connectivity icon on the navigation bar, and then tap Disconnect. S When connected via cable or cradle, detach your device. S When connected via Infrared, move the device away from the other computer or device. S When connected via a wireless network, switch off the connection.
Chapter 2 — Windows Mobile 2003 3 Enter the Your name and Password information, then tap Next. 4 Select the appropriate service type from the Account type drop-down list, either “POP3” or “IMAP4,” or enter a new account type, then tap Next.
Chapter 2 — Windows Mobile 2003 5 In Incoming mail, enter the name of your e-mail server. In Outgoing mail, enter the name of your Simple Mail Transfer Protocol (SMTP) host. If you are using a network connection, enter your domain name in Domain. Tap Options to do additional configurations. Tap Finish to assign this service. When finished, to connect to your e-mail server, from the Inbox application, tap Accounts > Connect.
3 Installing Applications There are multiple ways to get an application to your 700 Series Color Mobile Computer; just as there are multiple ways to package the application for delivery. Note: “700 Color” pertains to 740, 741, 750, 751, 760, and 761 Computers unless otherwise noted.
Chapter 3 — Installing Applications Packaging an Application Use any of these methods to package an application for installation: S For very simple applications, the application itself might be the only file that needs to be delivered. S It could be a directory structure that contains the application, supporting files like ActiveX controls, DLLs, images, sound files, and data files. S Or, you could package an application via a CAB file.
Chapter 3 — Installing Applications Installing Applications Consider any of the following options to get the package to the preferred location on your 700 Series Computer. S Microsoft ActiveSync S FTP Server (page 122) S Secure Digital or CompactFlash storage cards (page 122) S Registry (page 123) Using Microsoft ActiveSync Note: These instructions assume the 700 Color Management Tools were installed on your desktop. The Microsoft ActiveSync tool is located on the 700 Color Companion CD.
Chapter 3 — Installing Applications 3 Click Explore to access the Mobile Device folder on your unit. 4 From your desktop, select Start > Windows Explorer, then browse the “C:\Intermec\700C Mgmt Tools\CabFiles” path for any CAB files needed for your 700 Color Computer. Select the appropriate file, rightclick the file for a pop-up menu, then select Copy.
Chapter 3 — Installing Applications 7 Remove the CompactFlash card from your desktop and reinstall it into the 700 Color Computer. 8 Warm-boot the 700 Color Computer to add these files to the CompactFlash storage card. If the AUTOUSER.DAT file is found and the “RUN=” statement is correct, the task manager launches and executes your program on startup. Copying to a Secure Digital Storage Card 1 Suspend the 700 Color Computer and remove its Secure Digital drive, which holds a Secure Digital storage card.
Chapter 3 — Installing Applications To install the Registry Save application after a cold-boot is performed, change the properties of the REGFLUSH.CAB file to that of read-only. Using ActiveSync, copy the CAB file to the “Flash File Store\CabFiles” folder on the 700 Color Computer, then perform a cold-boot to load this CAB file. Deleting the Old Registry File 1 On the original 700 Color Computer, select Start > Programs > the File Explorer icon, then tap My Device > Flash File Store.
Chapter 3 — Installing Applications 3 Scroll down for the “RegFlush (Registry Save)” header, click Download next to “RegFlush” to download the CAB file to a location on your desktop. Copy the REGFLUSH.CAB file, then paste this file anywhere in the 700 Color Computer. Loading the Registry Save Application 1 On the 700 Color Computer, double-click the REGFLUSH.CAB file to load the “Registry Save” application.
Chapter 3 — Installing Applications Confirming the New Registry File To confirm whether the new registry file exists, do the following: 1 On the 700 Color Computer, select Start > Programs > the File Explorer icon, then tap My Device > Flash File Store. Press and hold your stylus in the white area for a pop-up menu, then select View All Files. 2 The new registry file should be on the root of the Flash File Store folder with today’s date.
Chapter 3 — Installing Applications 2 On your desktop, select Start > Settings > Control Panel, double-click the Folder Options icon, then click the View tab. Beneath “Hidden files and folders,” check Show hidden files and folders, then click OK to close. 3 Using the Microsoft ActiveSync application on your desktop, click Explore to access the Flash File Store folder on your 700 Color Computer and locate the “registry” file. Copy this file, then paste it in a temporary location on your desktop.
Chapter 3 — Installing Applications Migrating Applications Note: These instructions assume that the 700 Color Management Tools were installed on your desktop and that a storage card was added to the base configuration of the 700 Color Computer. Do the following required steps to ensure that CAB files are restored, applications automatically start, and registry is restored on cold-boot: 1 From your desktop, double-click the Intermec CE Imager desktop icon to access the Intermec CEImager application.
Chapter 3 — Installing Applications 5 Create a “\CabFiles” folder on the storage card. Copy any CAB files that are to be extracted on every startup into this folder. 6 In the “\2577” directory, add your custom AUTOUSER.DAT file. See the Recovery Help for more information on how to set up an AUTOUSER.DAT file.
Chapter 3 — Installing Applications Migrating from a 700 Monochrome Computer As you migrate from a 700 Monochrome Computer to a 700 Color Computer, you need to consider the following: When converting a 700 Monochrome Computer application to run on the 700 Color Computer, most APIs should work without changes. Below are a few exceptions: S The 700 Monochrome Computer uses the “\Storage Card” folder for nonvolatile storage.
4 Network Support The 700 Series Color Mobile Computer can integrate up to three radios in a single unit, and automatically installs the appropriate software for radio or phone use when the unit is powered on. Note: “700 Color” pertains to 740, 741, 750, 751, 760, and 761 Computers unless otherwise noted.
Chapter 4 — Network Support Understanding Your 700 Series Computer Due to the number of 700 Series Computers now available, and to the number of applications, drivers, and modules that may or may not be available, these tables are to help you determine what is on your particular computer. Hardware Features 730 Computers 802.11b radio, Bluetooth 740 Computers Ethernet, Bluetooth 741 Computers Ethernet, Bluetooth 750 Computers Ethernet, 802.11b radios, Bluetooth 751 Computers Ethernet, 802.
Chapter 4 — Network Support Antennas (760/761 Computers) The 760 Computers have color-coded tips to identify the WWAN radio type within. Below are the colors and their types. The 761 Computers in the United States and Canada use the external antenna with no color in its tip. See your Intermec representative for more information.
Chapter 4 — Network Support Ethernet Communications (740, 741, 750, 751, 760, 761 Computers) Follow the steps below to start Ethernet communications on the 700 Color Computer. If your system does not contain an 802.11b or 802.11b/g radio, then Ethernet networking using DHCP is selected as the default.
Chapter 4 — Network Support the Wireless 802.11 antenna icon shown to the left appears in the system tray as circled in the following illustration. To configure wireless 802.11 communications on the 700 Color Computer, tap Start > Settings > the System tab > the Wireless Network icon to access the Profile Wizard for the 802.11b or 802.11b/g radio module. Go to Appendix A, “Configurable Settings,” for information.
Chapter 4 — Network Support Network Selection APIs The Network Selection APIs change the network adapter configuration programmatically. Both drivers support the same IOCTL function numbers for loading and unloading the drivers. Go to Chapter 7, “Programming,” to see the APIs. Network Connections From the 700 Color Computer, tap Start > Settings > the Connections tab > the Connections icon > the Advanced tab > Network Card or the Network Adapters tab to access the network connections for this unit.
Chapter 4 — Network Support CORE (760, 761 Computers with WAN Radios) The Intermec CORE application provides a framework for various modules that let you configure and manage your Intermec products. If a module is not yet used or set, CORE defaults to the first module as listed alphabetically. These modules are software plug-ins that can be configuration tools, such as the 802.11b or 802.11b/g radio configuration module, or they can provide information on your environment, such as a battery life module.
Chapter 4 — Network Support Note: Once CORE is running, you can return to it by tapping its icon from the System Tray via the Today screen. Tap Start > Today > the Core three-ring icon (circled in the following illustration). 802.11 CF CORE Module The 802.11 CF CORE module displays helpful information about the 802.11b or 802.11b/g radio option built into your 760 or 761 Computer. Note that you can configure the 802.11b or 802.11b/g radio module from this CORE application.
Chapter 4 — Network Support IP Provides the IP address which can be set as either DHCP (Dynamic Host Configuration Protocol) or statically. Link Indicates the speed at which a connection is made, the data rate of the last transmitted packet. Power Indicates the power status of this 802.11b profile, such as “CAM,” “Auto,” or “PSP.” Signal Identifies the radio signal strength (in dBm) of signals coming from an access point.
Chapter 4 — Network Support CDMA/1xRTT CORE Module (760 Computers with WAN Radios) Code Division Multiple Access (CDMA) is a form of wide area wireless communications. 1XRTT supports up to 144 KB per second packet data transmission. The WAN radio CORE module displays helpful information about the CDMA/1xRTT radio option built into your 760 Computer. WAN Monitor — General Below are descriptions and meanings for each piece of information provided via the General tab.
Chapter 4 — Network Support CDMA WAN Monitor - General CDMA WAN Monitor - Details WAN Monitor — Details Below are descriptions and meanings for each piece of information provided via the Details tab. Most of this is similar to what is shown under the General tab. Note that the information is listed alphabetically. ESN Lists the Electronic Serial Number (ESN) assigned to this radio module or “Unavailable” if a number cannot be read from the radio. This number is required for activation.
Chapter 4 — Network Support GSM/GPRS CORE Module (760 Computers with WAN Radios) GSM (Global System for Mobile communications) is an open, nonproprietary wireless system. GPRS (General Packet Radio Service) is the highspeed data evolution of GSM that supports Internet Protocol (IP), enabling access to Internet and intranet content and applications from GPRS wireless devices.
Chapter 4 — Network Support GSM/GPRS WAN Monitor - General GSM/GPRS WAN Monitor - Details WAN Monitor — Details Below are descriptions and meanings for each piece of information provided via the Details tab. Most of this is similar to what is shown under the General tab. Note that the information is listed alphabetically. Firmware Rev Identifies the firmware version, if avaialble. IMEI # The IMEI (International Mobile station Equipment Identity) serial number of the GSM/GPRS radio module.
Chapter 4 — Network Support Microsoft Phone Application (761 Computers with CDMA Radios) With the WAN radio module installed in your 761 Computer, you can send and receive telephone calls. Use the speaker on the back of the computer as your earpiece and use the connector on the bottom of the computer for your mouthpiece. Data Provisioning (Sprint) Note: If you wish to do this activation another time, tap Cancel to close this wizard, then tap Yes.
Chapter 4 — Network Support 4 Enter your 6-digit activation code, then tap Next to continue. 5 Enter the phone number and MSID from Sprint, tap Next to continue. 6 The application prompts whether the information entered is correct. If so, tap Yes to continue, else tap No to return to the previous screen.
Chapter 4 — Network Support 7 Note that voice service is available immediately. Data service take a minimum of four hours of activation before you can use the service. If after four hours, a data connection is not established, see “Data Provisioning” on page 144 to manually launch data provisioning. The application acknowledges that your phone will be in service in four hours. Tap Finish to close the wizard.
Chapter 4 — Network Support 3 Tap Auto to initiate the activation. 4 The application acknowledges that your phone is now in service. Tap Finish to close the wizard.
Chapter 4 — Network Support Phone Application Note: Wait at least four hours after Sprint activation is complete before using this application. Data provisioning should occur automatically. Network information about your 761 Computer needs to propogate through the Sprint Network after the activation is complete. If data provisioning does not occur automatically, tap Start > Settings > the Personal tab > the Phone icon. Tap the Data tab, then tap Provision to initiate a session.
Chapter 4 — Network Support Speed Dial Tap Speed Dial to select a telephone number with which the 761 Computer is to dial automatically. To add to this list, use the Contacts application. See Chapter 2, “Windows Mobile 2003,” for more information about the Contacts application. Call History Tap Call History to note the telephone numbers that were previously dialed from this 761 Computer.
Chapter 4 — Network Support Tools Use the Tools menu to send a voice mail, access the Activation Wizard, send an SMS email message, or configure phone settings. S Tap Tools > Voice Mail to call and leave a voice message. S Tap Tools > Activation Wizard to access the wizard with which to activate your 761 Computer. Be sure to have an activation code, a phone number, and MSID information ready. See page 144 for instructions on using this wizard.
Chapter 4 — Network Support Phone Settings Either select Tools > Options from the Phone application or select Start > Settings > the Personal tab > the Phone icon to access the Phone Settings control panel applet. S Tap the Phone tab to customize your phone settings such as the ring type and ring tone to use for incoming calls, and the keypad tone to use when entering phone numbers. Tap Other Settings to go to the Sounds & Notifications control panel applet.
Chapter 4 — Network Support S Tap the Data tab to either reset your connection settings for PCS Vision or update your PCS Vision profile. For Sprint Networks, if your 761 Computer is unable to make a data connection and it has been more than four hours since activation, you can launch data provisioning from this screen. Tap Provision, then follow the prompts. This would take several minutes to set up the data connections.
Chapter 4 — Network Support S Tap the System tab to select the applicable function. Sprint Networks Verizon Networks S Tap the Phone Info tab to view the phone settings.
Chapter 4 — Network Support Microsoft Phone Application (761 Computers with GSM Radios) With the WAN radio module installed in your 761 Computer, you can send and receive telephone calls. Use the speaker on the back of the computer as your earpiece and use the connector on the bottom of the computer for your mouthpiece. Tap Start > Settings > the Phone desktop icon from the Personal tab or tap Start > Phone from the Today screen to access the application which processes your phone calls.
Chapter 4 — Network Support Call History Tap Call History to note the telephone numbers that were previously dialed from this 761 Computer. Speed Dial Tap Speed Dial to select a telephone number with which the 761 Computer is to dial automatically. To add to this list, use the Contacts application. See Chapter 2, “Windows Mobile 2003,” for more information about the Contacts application.
Chapter 4 — Network Support Tools Tap Tools > Send SMS tab to access the Inbox application and send an SMS (Short Messaging Service) message. Be sure to have an SMS number ready to send the message — this is usually the mobile phone number. See Chapter 2, “Windows Mobile 2003,” for information about Inbox. Phone Settings Either select Tools > Options from the Phone application or select Start > Settings > the Personal tab > the Phone icon to access the Phone Settings control panel applet.
Chapter 4 — Network Support S Tap the Services tab to access settings for any of the provided services. Tap any of the settings, then tap Get Settings. Make your changes, then tap ok to return to the Settings screen. Below is a sample Settings screen.
Chapter 4 — Network Support S Tap the Network tab to find, set, or select the type of network on which this phone is to communicate. Phone Information To learn the latest phone settings, including the manufacturer, model, firmware rev, and IMEI, select Start > Settings > the System tab, then tap the WAN Info desktop icon. Tap ok when finished.
Chapter 4 — Network Support PhoneUtility (760 Computers with GSM/GPRS Radios) Note: This application is for 760 Computers with GPRS radios, using PSM builds older than 3.65 (Operating System version 4.41), due to E911 requirements issued by the FCC. In the United States, voice is not an option on 760 Computers with CDMA radios. With the WAN radio module installed in your 760 Computer, you can send and receive telephone calls.
Chapter 4 — Network Support Notification Tap Settings to set your 760 Computer to either ring or vibrate or do both, then tap OK or ok to return to the Audio Mode screen. If you need to adjust the audio settings, tap Advanced Audio to continue. Advanced Audio Tap ok to close the warning and continue.
Chapter 4 — Network Support Drag the appropriate slider bars left or right to adjust the output and input levels. Tap Defaults to return the handset or speakerphone levels to their factory defaults. Click OK or ok to return to the Notification screen. Handset Output/Input Levels Speakerphone Output/Input Levels Tap ? for more information on these level settings, then click ok or OK to return to the Output/Input Levels screen.
Chapter 4 — Network Support SB555 Watcher (760 Computers with CDMA Radios) The SB555 Watcher program is used on the 760 Computer with CDMA radios only. Use this primarily to activate the WAN radio. Once the WAN radio is activiated, you can remove the SB555 Watcher program from the 760 Computer. This tells you how to set up your CDMA radio in your 760 Computer.
Chapter 4 — Network Support Via Microsoft ActiveSync You can transfer files from your desktop to your 760 Computer via Microsoft ActiveSync. See Chapter 2, “Windows Mobile 2003” for more information about ActiveSync. 1 Obtain software from the Intermec web site as described earlier. Download the software to any location on your 760 Computer, such as the Temp folder via the My Device root location. 2 Tap the carrier CAB file to install the application. 3 Go to “Finishing the Installation” on page 164.
Chapter 4 — Network Support 6 Tap Start > Programs > the File Explorer icon on the 760 Computer. 7 Tap the pull-down menu for My Documents and tap the My Device root location. 8 If you are using a CompactFlash storage card, tap Storage Card. If you are using an Secure Digital storage card, tap SDMMC Disk. 9 Scroll down, then tap the Sprint Watcher CAB file to install the application. 10 Go to “Finishing the Installation” in the next paragraph.
Chapter 4 — Network Support Activation Note: Set the date and time before doing this activation. SB555 Watcher is for activation and data provisioning. Once you enable voice capability, data capability, or both depending on the carrier, remove this program from the system by cold-booting your computer.
Chapter 4 — Network Support Note: Keep the activation information for your devices in a safe, accessible place should you have any future issues. Note: Not all of the elements listed are required by all service providers.
Chapter 4 — Network Support 4 When you reach the Activation screen, select Manual Activation. 5 At the appropriate screen, enter the Activation Code (OTSL, MSL, OTKSL, or SPC) provided by your carrier and tap Next. 6 Enter the phone number provided when your 760 Computer was activated and tap Next.
Chapter 4 — Network Support Verizon Automated Activation Process Note: This process takes approximately 60 seconds. Do the following to activate Verizon on your 760 Computer: 1 Tap Start > Programs > the Watcher icon. 2 Tap Yes, I accept to accept the license agreement, then tap OK to continue. Note that this license agreement does not appear again after this installation.
Chapter 4 — Network Support 4 Click Next, click Next again to dial the number displayed on the screen. 5 The activation process starts automatically.
Chapter 4 — Network Support 6 You will see a series of unlock codes on your screen. 7 The following illustration shows the result of a successful activation.
Chapter 4 — Network Support 8 Click the Connect button (circled in the following illustration) to connect to the carrier’s network. 9 Select Start > Internet Explorer, then choose a web site. Your unit is now successfully activated. 10 Perform a cold-boot on your 760 Computer to uninstall the Watcher application. Watcher is intended for activation purposes only. Intermec recommends using the following for establishing and maintaining connection to the WAN radio.
Chapter 4 — Network Support Sprint Automated Activation Process Note: Sprint PCS uses a data provisioning method termed IOTA (Internet Over The Air) to complete its activation and data enablement. The following steps detail how to properly activate and data provision your 760 Computer. Do the following to set up activation: 1 Provide Sprint with your ESN, rate plan, and account information. The ESN is either on the box or on a label inside the battery compartment.
Chapter 4 — Network Support Download and Activate Sprint Watcher 1 Make sure the Registry Restore feature on your 760 Computer is disabled. Select Start > Settings > the System tab. Tap the Utilities desktop icon, then the Registry Save tab. Clear the Enable Registry Save box.
Chapter 4 — Network Support 2 Perform a cold-boot on your 760 Computer, then go through the normal Pocket PC set-up (i.e. Align Screen etc.). 3 Important! Set the Date and Time. 4 Tap the Sprint_Watcher_PPC_2002-03xxx.CAB file to perform the installation. 5 Perform a warm-boot on your 760 Computer to load the CAB file. 6 From the Today screen, tap the LAN Network icon in the System Tray (circled in the following illustration).
Chapter 4 — Network Support 9 Tap Yes, I accept to accept the license agreement, then tap OK to continue. This license agreement does not appear again after this installation. Tap OK for the 760 Computer to perform a warm-boot and complete the installation.
Chapter 4 — Network Support Using Sprint Watcher Before you start using the Sprint Watcher application, make sure you match the correct ESN with each 760 Computer and that you have at least 80% CDMA signal strength. The ESN that you give to your provider is either on the box or on a label inside the battery compartment. The label would include the “ESN” term and a bar code along with the serial number.
Chapter 4 — Network Support 2 If your 760 Computer was not previously activated, Watcher automatically starts the Activation Wizard. Otherwise, select Manual Activation to continue.
Chapter 4 — Network Support 3 Enter the MSL or lock code received from Sprint. 4 Enter the phone number (MIN) and MSID received from Sprint. These numbers may be the same.
Chapter 4 — Network Support 5 After entering the phone number and MSID, the modem then resets and the Watcher application displays the following screens. Note: If the “searching for SB555” screen does not proceed to the next screen after 30-40 seconds, perform a warm-boot on your 760 Computer, then restart the Watcher program.
Chapter 4 — Network Support Data Provisioning At this point, the activation on the Sprint network is complete. It is recommended by Sprint to wait before you launch data provisioning to allow time for the activation to propagate through your Sprint network. Before you manually launch data provisioning, wait at least 30 minutes. In some cases, you may have to wait up to two hours. 1 If Data Provisioning does not start automatically, select Admin > Data Provisioning from the bottom menu bar.
Chapter 4 — Network Support Activation over the air typically takes 1–20 minutes. If data provisioning fails, do the following: S If Data Provisioning fails and the message “could not prepare data services, please contact Sprint” displays, retry the Data Provisioning step by tapping the “Admin” menu icon at the bottom of the Watcher screen. Select “Data Provisioning...” and answer “yes” to the request.
Chapter 4 — Network Support 3 The following screen appears once data provisioning is complete: 4 Test the data connection by tapping on the “connect” button to make a data connection to the network. Watcher progresses through the following two screens. Once you see the second screen you know that your mobile computer has successfully connected to the 1XRTT network.
Chapter 4 — Network Support 5 Select Start > Internet Explorer, then tap Pocket Internet Explorer to choose a web site. Your unit is now successfully activated. Perform a cold-boot on your 760 Computer to uninstall the Watcher application. Watcher is intended for activation purposes only. Intermec recommends using the following for establishing and maintaining connection to the WAN radio.
Chapter 4 — Network Support AT Command Interface (760 Computers) This interface specification is based on the following recommendation: S ETSI GSM 07.05: European Digital Cellular Telecommunication System (phase 2) Use of DTE-DCE interface for Short message and cell broadcast service. S ETSI GSM 07.07: European Digital Cellular Telecommunication System (phase 2) AT command set for GSM Mobile Equipment. S ITU-T Recommendation V.25 ter Serial asynchronous automatic dialing and control.
Chapter 4 — Network Support Testing the AT Commands These commands can be sent to either WAN radio by setting up a dial-up networking connection to COM4. Do the following to initiate this connection and test these commands to your radio: 1 From the 760 Computer, select Start > Settings > the Connections tab > Connections. Under My ISP, tap Add a new modem connection. 2 Enter a name for the connection, select “WANA on COM4” from the Select a modem drop-down list, then tap Next to continue.
Chapter 4 — Network Support 3 Enter a phone number as it should be dialed, then tap Next to continue. Select Start > Help for more information or tap use dialing rules to make modifications. Note that this screen may vary based on dialing rules. 4 Tap Advanced to adjust the baud rate.
Chapter 4 — Network Support 5 Select “115200” from the Baud rate drop-down list via the General page. 6 Tap the Port Settings tab, check Enter dialing commands manually, tap ok, then tap Finish to return to the Connections screen.
Chapter 4 — Network Support 7 Tap Manage existing connections from the Connections page, press and hold the new connection for a pop-up menu, then tap Connect to initiate the connection. 8 Wait about ten seconds for the Network Log On screen, then tap OK. Note: You do not need to enter any information within the Network Log On screen. Use either the onscreen keyboard, or press the keys to type any of the AT commands provided. Press or tap Enter to send each command.
Chapter 4 — Network Support Wireless Personal Area Networking “Bluetooth” is the name given to a technology standard using short-range radio links, intended to replace the cables connecting portable and fixed electronic devices. The standard defines a uniform structure for a wide range of devices to communicate with each other, with minimal user effort. Its key features are robustness, low complexity, low power, and low cost.
Chapter 4 — Network Support Mode The default tab activates or deactivates Bluetooth. When Bluetooth is activated, the 700 Color Computer discovers and connects to remote devices.
Chapter 4 — Network Support Wireless Printing Use this tab to print via Bluetooth devices. Tap Device Discovery to discover (or scan) for remote Bluetooth devices. When the 700 Color Computer is finished scanning, any newly discovered devices appear in the upper Devices box. Tap Clear Devices to remove the list from the Devices box. To print to a Bluetooth device, select any of the devices listed in the Devices box, then tap Connect. Once connected, the selected device moves to the lower Connected box.
Chapter 4 — Network Support Tap ok to return to the Wireless Printing page. File Transfer Use this page to enable your unit to receive files from another Bluetooth device, or from any device that supports this function.
Chapter 4 — Network Support Note that this does not apply to the 730 Computer. From this point, this transfer is similar to an IrDA file transfer. To transfer a file, tap Start > Programs > File Explorer and locate the file to transfer. Press and hold on the file for a pop-up menu, then select Beam File. The system searches for a list of Bluetooth devices that will accept a connection from your unit. When the list is complete, tap on a device to which to send the file.
Chapter 4 — Network Support AutoIP/DHCP Automatic Private IP Addressing (AutoIP) is enabled by default in Windows Mobile 2003. To remain compatible with other versions of Pocket PC, this setting needs to be enabled. You can configure the registry settings in the following to set the required AutoIP/DHCP behavior: S For Ethernet: HKEY_LOCAL_MACHINE\Comm\LAN9001\TcpIp S Fot 802.11: HKEY_LOCAL_MACHINE\Comm\NETWLAN1\TcpIp Other registry keys that can modify the behavior of AutoIP are as follows.
Chapter 4 — Network Support SNMP Configuration on the 700 Color Computer In short, SNMP is an application-layer protocol that facilitates the exchange of management information between network devices. The 700 Color Computer is such an SNMP-enabled device. Use SNMP to control and configure the 700 Color Computer anywhere on an SNMP-enabled network.
Chapter 4 — Network Support Object Identifiers Each object has a unique identifier called an OID, which consist of a sequence of integer values represented in dot notation. Objects are stored in a tree structure and OIDs are assigned based on the position of the object in the tree. For example, the internet OID is equal to 1.3.6.1. Seven MIB OIDs are shown in the following table: MIB Object Identifiers MIB-II Item OID Group or Table Description ifNumber 1.3.6.1.2.1.2.1.
5 Printer Support The 700 Series Color Mobile Computer works with the following printers from Intermec Technologies. Contact an Intermec representative for information about these printers. S 6820 A full-page, 80-column printer. S 6808 A 4-inch belt-mount printer. S PB20 A 2-inch belt-mount printer with a Bluetooth compatible module from Socket Communications. S 782T A 2-inch workboard printer. Note: “700 Color” pertains to 740, 741, 750, 751, 760, and 761 Computers unless otherwise noted.
Chapter 5 — Printer Support Printing ASCII The following methods for printing using Pocket PC at this time is as follows: S Add port drivers to print ASCII directly to the port. S Use LinePrinter ActiveX Control from the Printing Resource Kit via the Intermec Developer Library (IDL) available as a download from the Intermec webs site at www.intermec.com. Contact your Intermec representative for more information. S Via wireless printing - see the Wireless Printing Development Guide for more information.
Chapter 5 — Printer Support NPCP Printer Driver The NPCP printer communications driver (NPCPPORT.DLL) is a Stream Device Driver built into the operating system. The driver supports only NPCP communications to and from the 6820 and 4820 printers over a selected serial port. All applications use WIN32 API functions to access the drivers. Basic operations are easily implemented by applications through the CreateFile(), WriteFile(), ReadFile(), DeviceIOControl(), and CloseHandle() Win32 APIs.
Chapter 5 — Printer Support Opening the NPCP Driver The application opens the NPCP driver by using the CreateFile() function. The call can be implemented as follows. The first parameter “LPT9:” must reflect the device name and index used in the RegisterDevice() function call and will fail for any of the following reasons: hFile = CreateFile(_T(”LPT9:”), GENERIC_WRITE | GENERIC_READ, 0, NULL, OPEN_ALWAYS, FILE_ATTRIBUTE_NORMAL, NULL); S The port associated with the device during RegisterDevice() is in use.
Chapter 5 — Printer Support NPCP Driver I/O Controls An application uses the DeviceIoControl() function to specify an printer operation to be performed. Certain I/O controls are required to bind and close communication sessions with the printer, and must be completed before any other commands to the driver can execute properly. The function returns TRUE to indicate the device successfully completed its specified I/O control operation, otherwise it returns FALSE.
Chapter 5 — Printer Support NPCP Printer Communications All NPCP printer communications should be based on the following flow: 1 Use CreateFile(); to open the printer driver. 2 Use IOCTL_NPCP_BIND to bind a session with the printer; IOCTL_NPCP_ERROR to check for errors on the bind to ensure success; and IOCTL_NPCP_CANCEL to cancel any outstanding print jobs. 3 Use IOCTL_NPCP_FLUSH to poll the printer to free up printer buffer resources. Use IOCTL_NPCP_FLUSH to poll the printer’s status.
Chapter 5 — Printer Support NPCP Error Codes Call the IOCTL_NPCP_ERROR I/O control function to receive PL/N compatible error codes. Applications must decide how to act upon the data returned.
Chapter 5 — Printer Support O’Neil Printer Driver The DTR printer communications driver is a Stream Device Driver named ONEIL.DLL. All applications use WIN32 API functions to access drivers. Basic operations are easily implemented by applications through the CreateFile(), WriteFile(), DeviceIOControl() and CloseHandle() Win32 APIs. The driver supports communications to 6804DM, 6804T, 6805A, 6806, 6808, 681T, and PB20 printers over a selected serial port.
Chapter 5 — Printer Support Opening the DTR Driver The application opens the DTR driver by using the CreateFile() function. The call can be implemented as follows: hFile = CreateFile(_T(”DTR1:”), GENERIC_WRITE, 0, NULL, OPEN_ALWAYS, FILE_ATTRIBUTE_NORMAL, NULL); The first parameter “DTR1:” must reflect the device name and index used in the RegisterDevice() function call.
Chapter 5 — Printer Support 206 700 Series Color Mobile Computer User’s Manual
6 Scanner Support The 700 Series Color Mobile Computer is available with imaging or laser scanning technologies, including the following: APS Linear Imager: (standard for 730 Computers) — includes the EV10 Scan Engine Reads 1D symbologies and PDF417 bar codes. Linear imaging using Vista Scanning technology reads low-contrast bar codes, laminated bar codes, and bar codes displayed on CRT or TRT displays. This imaging uses harmless LEDs for illumination and does not require any warning labels.
Chapter 6 — Scanner Support Scanner Control and Data Transfer Note: To use the methods described below, enable Data Collection functionality on the 700 Computer using the bootloader configuration menu.
Chapter 6 — Scanner Support Data Collection Configuration For Units with PSM Builds Older than 3.00 Scanner settings for the 700 Color Computer can be configured via the Data Collection control panel applet. From the 700 Color Computer, tap Start > Settings > the System tab > Data Collection. See Appendix A, “Configurable Settings” for more information about the following parameters. Note that these are in alphabetical order.
Chapter 6 — Scanner Support Internal Scanners The Intermec Internal Scanner feature allows Automatic Data Collection (ADC) by accepting data from the COM1 port and wedging it into the keyboard interface. You can enable or disable this feature from the Today screen on the 700 Color Computer. For Units With PSM Build 3.00 or Newer Do the following before you configure your internal scanner from the Intermec Settings control panel applet.
Chapter 6 — Scanner Support 2 Tap the Data Collection option, then tap (+) to expand Internal Scanner. This sample screen is for the IT4000 scan engine. Scanner and Imager Settings Depending on what is selected as the scanner model, image settings, decode security, scanner settings, and virtual wedge are configured from the Intermec Settings applet. See the the Intermec Computer Command Reference Manual, available from the Intermec web site at www.intermec.
Chapter 6 — Scanner Support Internal Scanner Supported Symbologies See the following table for a guideline and Appendix B, “Bar Code Symbologies” for more information on each supported symbology: Symbologies EV10 IT4000 SE900 SE900HS SE900-S6 SE900HS-S6 Code39 X X X X X X UPC/EAN X X X X X X Code 128 X X X X X X Interleaved 2 of 5 X X X X X X Code 93 X X X X X X Codabar X X X X X X Code 2 of 5 X X X X X X MSI X X X X X X Plessey X X X X X
Chapter 6 — Scanner Support Tethered Scanners The Intermec Tethered Scanner feature allows Automatic Data Collection (ADC) by accepting data from the COM1 port and wedging it into the keyboard interface. You can enable or disable this feature from the Today screen on the 700 Color Computer. The following information is divided between units with PSM Builds older than 3.00 (next paragraph) or units with PSM Builds 3.00 or newer (starting on page 218). For Units With PSM Builds Older than 3.
Chapter 6 — Scanner Support S Select 1551/1553 to enable the Sabre 1551E or 1553 Tethered Scanner to scan, then send data as keyboard data. The 1551/1553 Tethered Scanner has software onboard that translates scanned data into characters, so the running/active application does not need to know how to do that. All the scanner control and data transfer APIs will work with the 1551/1553 Tethered Scanner, so you can control the device.
Chapter 6 — Scanner Support Tethered Scanner Default settings for the Tethered Scanner are shown in this illustration: Sabre 1551E or 1553 Tethered Scanner The default communication configuration for the Sabre 1551E or 1553 Tethered Scanner is shown in the following illustration. Scan the EasySet Reset Factory Defaults label to set the Sabre 1551E or 1553 tethered scanner communications settings to this configuration.
Chapter 6 — Scanner Support Scanner Cabling A null modem cable is required for the Welch Allyn 1470 Imager to communicate with the 700 Color Computer when using the 700 Color Serial Cable (P/N: 226-999-001). Sabre 1551E / 1553 Cables connect directly to the Model 700 COM Port. Limitations and Capabilities The Tethered Scanner has the following limitations: S No auto detection of a scanner’s physical connection to COM1 port.
Chapter 6 — Scanner Support S The bar code APIs, defined in the IADC interface, are available to get bar code data from the bar code scanner. The following example shows how to programmatically collects bar code data: #include “IADC.h” #include “ITCAdcMgmt.h” // Linked with ITCUUID.LIB // Linked with ITCAdcDevMgmt.lib IADC* pIADC; HRESULT hrStatus = S_OK; // Create a ADC COM interface to collect bar code data from the 1551E/1553 // when the 1551/1553 menu option is enabled.
Chapter 6 — Scanner Support For Units With PSM Build 3.00 or Newer Configuring the Tethered Scanner Do the following before you configure your tethered scanner from the Intermec Settings control panel applet. Information about the settings you can configure with this applet is described in the Intermec Computer Command Reference Manual. The online manual is available from the Intermec web site at www.intermec.com. 1 Connect your tethered scanner to the tethered scanner port.
Chapter 6 — Scanner Support 4 Tap (+) to expand Scanner Settings, tap Scanner model for a dropdown list, then select the applicable scanner, such as “1551E” or “1553” in this sample screen. 5 Make sure a scanner is properly connected to your 700 Computer, tap to check Enable scanner port, then tap File > Save Settings from the bottom of the screen. These changes take several moments to reset.
Chapter 6 — Scanner Support 1551E or 1553 Selected for Scanner Model When “1551E” or “1553” is selected from the Scanner model option (see step 4 above), and the port state is already enabled (see step 5), the process will take several moments to reset. When 1551E or 1553 is successfully connected during this step, the unit will emit some beeps.
Chapter 6 — Scanner Support Note: When selecting either the 1551E or the 1553 Scanner or enabling the scanner port for these scanners, the 700 Computer tries to communicate with the attached scanner. If the scanner is not powered, if the cable is not connected properly, the wrong cable is used, or if the scanner firmware is older than 2.0, and the “Failed to save one or more settings” message appears, then this step failed.
Chapter 6 — Scanner Support Tethered Scanner Supported Symbologies The user interface may allow configuration of PDF417, Micro PDF417, RSS, and Codablock bar code symbologies. However, these symbologies are dependant on what scanner models and firmware versions are in use. See the following table for a guideline and Appendix B, “Bar Code Symbologies” for more information on each supported symbology: You can use a generic ASCII scanner with the 700 Color Computer.
7 Programming The following programming information pertains to the 700 Series Color Mobile Computer: S Creating CAB Files (page 224) S Customization and Lockdown (page 241) S FTP Server (page 242) S Kernel I/O Control Functions (page 250) S Network Selection APIs (page 266) S Notifications (page 289) S Reboot Functions (page 291) S Remapping the Keypad (page 292) Note: “700 Color” pertains to 740, 741, 750, 751, 760, and 761 Computers unless otherwise noted.
Chapter 7 — Programming Creating CAB Files The Windows CE operating system uses a .CAB file to install an application on a Windows CE-based device. A .CAB file is composed of multiple files that are compressed into one file. Compressing multiple files into one file provides the following benefits: S All application files are present. S A partial installation is prevented. S The application can be installed from several sources, such as a desktop computer or a Web site.
Chapter 7 — Programming [CEStrings] This specifies string substitutions for the application name and the default installation directory. Required? Yes S AppName: app_name Name of the application. Other instances of %AppName% in the .INF file are replaced with this string value, such as RP32. S InstallDir: default_install_dir Default installation directory on the device. Other instances of %InstallDir% in the .INF file are replaced with this string value.
Chapter 7 — Programming [CEDevice] Describes the platform for the targeted application. All keys in this section are optional. If a key is nonexistent or has no data, Windows CE does not perform any checking with the exception being UnsupportedPlatforms. If the UnsupportedPlatforms key exists but no data, the previous value is not overridden. Required? Yes S ProcessorType : processor_type The value that is returned by SYSTEMINFO.dwProcessorType.
Chapter 7 — Programming Example The following code example shows three [CEDevice] sections: one that gives basic information for any CPU and two that are specific to the SH3 and the MIPS microprocessors. [CEDevice] UnsupportedPlatforms = pltfrm1 ; A “template” for all platforms ; Does not support pltfrm1 ; The following specifies version 1.0 devices only. VersionMin = 1.0 VersionMax = 1.0 [CEDevice.ARM] ; Inherits all [CEDevice] settings ; This will create a .CAB file specific to ARM devices.
Chapter 7 — Programming [DefaultInstall] This describes the default installation of your application. Note that under this section, you will list items expanded upon later in this description. Required? Yes S Copyfiles: copyfile_list_section Maps to files defined later in the .INF file, such as Files.App, Files.Font, and Files.Bitmaps. S AddReg: add_registry_section Example: RegSettings.
Chapter 7 — Programming [SourceDiskFiles] This describes the name and path of the files in which your application resides. Required? Yes S filename: disk_number[,subdir] RPM.EXE = 1,c:\appsoft\... WCESTART.INI = 1 RPMCE212.INI = 1 TAHOMA.TTF = 2 Note: [,subdir] is relative to the location of the INF file. Example [SourceDisksFiles] ; Required section begin.wav = 1 end.wav = 1 sample.hlp = 1 [SourceDisksFiles.SH3] sample.exe = 2 ; Uses the SourceDisksNames.SH3 identification of 2. [SourceDisksFiles.
Chapter 7 — Programming [DestinationDirs] This describes the names and paths of the destination directories for the application on the target device. Note Windows CE does not support directory identifiers. Required? Yes S file_list_section: 0,subdir String that identifies the destination directory. The following list shows the string substitutions supported by Windows CE. Use these only for the beginning of the path.
Chapter 7 — Programming [CopyFiles] This section, under the [DefaultInstall] section, describes the default files to copy to the target device. Within the [DefaultInstall] section, files were listed that must be defined elsewhere in the INF file. This section identifies that mapping and may contain flags. Required? Yes S copyfile_list_section: destination_filename,[source_filename] The source_filename parameter is optional if it is the same as destination_filename.
Chapter 7 — Programming [AddReg] This section, under the [DefaultInstall] section, is optional and describes the keys and values that the .CAB file adds to the device registry. Within the [DefaultInstall] section, a reference may have been made to this section, such as “AddReg=RegSettings.All”. This section defines the options for that setting. Required? No S add_registry_section: registry_root_string String that specifies the registry root location.
Chapter 7 — Programming [CEShortCuts] This section, a Windows CE-specific section under the [DefaultInstall] section, is optional and describes the shortcuts that the installation application creates on the device. Within the [DefaultInstall] section, a reference may have been made to this section, such as “ShortCuts.All”. This section defines the options for that setting. Required? No S shortcut_list_section: shortcut_filename String that identifies the shortcut name. It does not require the .
Chapter 7 — Programming rpmce212.ini = 1 intermec.bmp = 1 rpmlogo.bmp = 1 rpmname.bmp = 1 import.bmp = 1 export.bmp = 1 clock.bmp = 1 printer.bmp = 1 filecopy.bmp = 1 readme.txt = 1 lang_eng.bin = 1 rpmdata.dbd = 1,database\wce1 tahoma.ttf = 2 mfcce212.dll = 3 olece212.dll = 3 olece211.dll = 1,c:\windows ce tools\wce400\NMSD61102.11\mfc\lib\x86 rdm45wce.dll = 1,c:\rptools\rdm45wce\4_50\lib\wce400\wcex86rel picfmt.dll = 1,c:\rptools\picfmt\1_00\wce400\wcex86rel6110 fmtctrl.
Chapter 7 — Programming fmtctrl.dll,,,0 ugrid.dll,,,0 simple.dll,,,0 psink.dll,,,0 pslpwce.dll,,,0 npcpport.dll,,,0 ;dexcom.dll,,,0 [Files.DataBase] rpmdata.dbd,,,0 [Files.Fonts] tahoma.ttf,,,0 [Files.BitMaps] intermec.bmp,,,0 rpmlogo.bmp,,,0 rpmname.bmp,,,0 import.bmp,,,0 export.bmp,,,0 clock.bmp,,,0 printer.bmp,,,0 filecopy.bmp,,,0 [Files.Intl] lang_eng.bin,,,0 [Files.TelecomNcsCE] ncsce.exe,,,0 nrinet.dll,,,0 [Files.Windows] readme.txt,,,0 [Files.Import] readme.txt,,,0 [Files.Export] readme.
Chapter 7 — Programming Using Installation Functions in SETUP.DLL SETUP.DLL is an optional file that enables you to perform custom operations during installation and removal of your application. The following list shows the functions that are exported by SETUP.DLL. Install_Init Called before installation begins. Use this function to check the application version when reinstalling an application and to determine if a dependent application is present. Install_Exit Called after installation is complete.
Chapter 7 — Programming PROCESSENTRY32 peProcess; DWORD thDeviceProcessID; TCHAR lpname[MAX_PATH]; if ( !pname || !*pname ) return FALSE; _tcscpy( lpname, pname ); _tcslwr( lpname ); hProcList = CreateToolhelp32Snapshot( TH32CS_SNAPPROCESS, 0 ); if ( hProcList == INVALID_HANDLE_VALUE ) { return FALSE; } // end if memset( &peProcess, 0, sizeof(peProcess) ); peProcess.
Chapter 7 — Programming WORD cFailedRegVals, WORD cFailedShortcuts ) { HANDLE h; TCHAR srcfile[MAX_PATH]; TCHAR dstfile[MAX_PATH]; if (cFailedDirs || cFailedFiles || cFailedRegKeys || cFailedRegVals || cFailedShortcuts) return codeINSTALL_EXIT_UNINSTALL; if ( IsProcessRunning( L”autocab.exe” ) ) { h = CreateFile( L”\\Windows\\__resetmeplease__.
Chapter 7 — Programming // TODO: Perform the reverse of INSTALL_INIT here return codeUNINSTALL_INIT_CONTINUE; } codeUNINSTALL_EXIT Uninstall_Exit(HWND hwndParent) { // TODO: Perform the reverse of INSTALL_EXIT here return codeUNINSTALL_EXIT_DONE; } The system software looks for the following directory structure and files on the installed media card whether it be an SD card or CF card or embedded flash file system. No other folders need exist. \2577\autorun.exe \2577\autorun.dat \2577\autocab.
Chapter 7 — Programming Troubleshooting the CAB Wizard To identify and avoid problems that might occur when using the CAB Wizard, follow these guidelines: S Use %% for a percent sign (%) character when using this character in an .INF file string, as specified in Win32 documentation. This will not work under the [Strings] section. S Do not use .INF or .CAB files created for Windows CE to install applications on Windows-based desktop platforms. S Ensure the MAKECAB.EXE and CABWIZ.
Chapter 7 — Programming Customization and Lockdown Pocket PC (Windows Mobile) is a hardware specification created by Microsoft Corporation. Devices that wish to carry the Pocket PC logo must meet the minimum hardware requirements set in the Pocket PC specification. Manufacturers are free to add extra hardware functionality. Pocket PC devices also use a specialized version of the CE operating system. This operating system is built from Windows CE 4.
Chapter 7 — Programming FTP Server FTP support is provided through the FTP Server application FTPDCE.EXE (MS Windows CE Versions) which is provided as part the base system. FTPDCE is the Internet File Transfer Protocol (FTP) server process. The server can be invoked from an application or command line. Besides servicing FTP client requests the FTP Server also send a “network announcement” to notify prospective clients of server availability.
Chapter 7 — Programming Configurable Parameters Via the Registry Editor The following parameters receive default values during the installation of the Intermec FTP Server components. A few of the parameters are visible in the registry by default, but most must be created in order to modify the default behavior of the FTP server. BlockSize Setting this parameter configures the Intermec FTP Server to transmit and receive Ethernet packets using the specified data block size.
Chapter 7 — Programming IDNATarget This parameter configures the Intermec FTP Server to transmit the IDNA to a specific destination instead of a general UDP broadcast. This parameter is useful on networks that do not allow UDP broadcasts to be routed between subnets. The use of this parameter restricts the reception of the IDNA to the target destination only. Key HKLM\Software\Intermec\IFTP Value Type REG_SZ Valid Range None. Default None.
Chapter 7 — Programming Transferring Files Over TCP/IP Networks The File Transfer Protocol (FTP) server transfers files over TCP/IP networks. The FTPDCE.EXE program is a version that does not display a window, but can run in the background. FTPDCE is the Internet File Transfer Protocol (FTP) server process. The server can be invoked from an application or command line.
Chapter 7 — Programming SITE The following extended OEM commands are supported by the SITE request. For Microsoft FTP clients, you can send site commands by preceding the command with “quote” such as “quote site status.” ATTRIB Gets or sets the attributes of a given file. (SITE ATTRIB) Usage QUOTE SITE ATTRIB [+R | -R] [+A | -A ] [+S | -S] [+H | -H] [[path] filename] + Sets an attribute. – Clears an attribute. R Read-only file attribute. A Archive file attribute. S System file attribute.
Chapter 7 — Programming STATUS Returns the current settings of the FTP Server. MAC, serial number, model, IP address, network announcement information as well as OS memory usage are returned. (SITE STATUS) Usage: TIMEOUT Toggles idle timeout between 120 to 1200 seconds (2 to 20 minutes). If this timer expires with no activity between the client and the server, the client connection will be disconnected.
Chapter 7 — Programming The format of the FTPDCE.TXT is as follows: FTPDCE:user1!passwd1user2!passwd2user3 !passwd3... Note: The user accounts and passwords are case sensitive. Once the access control list is encrypted on the 700 Color Computer, the FTP Server hides this file from users. Once an access control list is installed on the 700 Color Computer, a new one is not accepted by the FTP Server until the previous one is removed.
Chapter 7 — Programming The default is to start the FTP Server at boot time, unless the following registry entry is defined and set to “0” which disables AutoFTP. “1” enables the AutoFTP. The entry can be set from the NDISTRAY pop-up menu by selecting either AutoFTP On or AutoFTP Off. HKEY_LOCAL_MACHINE\Software\Intermec\Ndistray\StartupIFTP These new entries are located below the selections to load the network drivers.
Chapter 7 — Programming Kernel I/O Controls This describes the KernelIoControl() functions available to application programmers. Most C++ applications will need to prototype the function as the following to avoid link and compile errors. extern “C” BOOL KernelIoControl(DWORD dwIoControlCode, LPVOID lpInBuf, DWORD nInBufSize, LPVOID lpOutBuf, DWORD nOutBufSize, LPDWORD lpBytesReturned); IOCTL_HAL_GET_DEVICE_INFO This IOCTL returns either the platform type or the OEMPLATFORM name based on an input value.
Chapter 7 — Programming IOCTL_HAL_ITC_READ_PARM Usage #include “oemioctl.h” Syntax BOOL KernelIoControl( IOCTL_HAL_ITC_READ_PARM,LPVOID lpInBuf,DWORD nInBufSize,LPVOID lpOutBuf,DWORD nOutBufSize,LPDWORD lpBytesReturned ); Parameters lpInBuf Points to this structure. See “ID Field Values” below. struct PARMS { BYTE id; BYTE ClassId; }; nInBufSize Must be set to the size of the PARMS structure. lpOutBuf Must point to a buffer large enough to hold the return data of the function.
Chapter 7 — Programming ID Field Values (continued) ITC_NVPARM_DISPLAY_TYPE This IOCTL returns the device’s display type. One byte is returned in the buffer pointed to by the lpOutBuffer parameter. ITC_NVPARM_EDG_IP This IOCTL returns the device Ethernet debug IP address. Four bytes are returned in the buffer pointed to by the lpOutBuffer parameter. ITC_NVPARM_EDBG_SUBNET This IOCTL returns the device Ethernet debug subnet mask. Four bytes are returned in the buffer pointed to by the lpOutBuffer parameter.
Chapter 7 — Programming ID Field Values (continued) ITC_NVPARM_RTC_RESTORE This IOCTL reads the state of the real-time clock restore flag. A BOOLEAN DWORD is returned in the buffer pointed to by lpOutBuffer. TRUE indicates that the RTC is restored upon a cold boot. FALSE indicates that the RTC is not restored. ITC_NVPARM_INTERMEC_DATACOLLECTION_SW This IOCTL reads the state of the data collection software enabled flag.
Chapter 7 — Programming ID Field Values (continued) ITC_NVPARM_BLUETOOTH_INSTALLED This IOCTL reads the state of the Bluetooth radio installed flag. A BOOLEAN DWORD is returned in the buffer pointed to by lpOutBuffer. TRUE indicates that the Bluetooth radio is installed. FALSE indicates that no Bluetooth radio is installed. ITC_NVPARM_SERIAL2_INSTALLED This IOCTL reads the state of the serial 2 (COM2) device installed flag. A BOOLEAN DWORD is returned in the buffer pointed to by lpOutBuffer.
Chapter 7 — Programming IOCTL_HAL_ITC_WRITE_SYSPARM Describes and enables the registry save location. Usage #include “oemioctl.h” Syntax BOOL KernelIoControl( IOCTL_HAL_ITC_WRITE_SYSPARM,LPVOID lpInBuf,DWORD nInBufSize, LPVOID lpOutBuf, DWORD nOutBufSize, LPDWORD lpBytesReturned ); Parameters lpInBuf A single byte that may be one of the id values. See “ID Field Values” on the next page. nInBufSize Must be set to the size of the lpInBuf in bytes.
Chapter 7 — Programming ID Field Values The id field of lpInBuf may be one of the following values: ID Field Values ITC_REGISTRY_SAVE_ENABLE This function enables or disables the save registry to non-volatile media feature of the RegFlushKey() function. lpOutBuf must be set to zero (FALSE) if the feature is to be disabled or one (TRUE) if the feature is to be enabled. ITC_ DOCK_SWITCH This IOCTL sets a position of the dock switch. The dock switch may be set to either “modem” or “serial” positions.
Chapter 7 — Programming IOCTL_HAL_GET_DEVICEID This IOCTL returns the device ID. There are two types of device IDs supported, which are differentiated based on the size of the output buffer. The UUID is returned if the buffer size is set to sizeof(UNIQUE_DEVICEID), otherwise the oldstyle device ID is returned. Usage #include “pkfuncs.h” #include “deviceid.
Chapter 7 — Programming IOCTL_HAL_GET_OAL_VERINFO Returns the HAL version information of the Pocket PC image. Usage #include “oemioctl.h” Syntax BOOL KernelIoControl( IOCTL_HAL_GET_OAL_VERINFO,LPVOID lpInBuf,DWORD nInBufSize,LPVOID lpOutBuf,DWORD nOutBufSize,LPDWORD lpBytesReturned ); Parameters lpInBuf Should be set to NULL. lpInBufSize Should be set to zero. lpOutBuf Must point to a VERSIONINFO structure as defined by OEMIOCTL.H.
Chapter 7 — Programming IOCTL_HAL_GET_BOOTLOADER_VERINFO Returns the HAL version information of the Pocket PC image. Usage #include “oemioctl.h” Syntax BOOL KernelIoControl( IOCTL_HAL_GET_OAL_VERINFO,LPVOID lpInBuf, DWORD nInBufSize,LPVOID lpOutBuf,DWORD nOutBufSize,LPDWORD lpBytesReturned ); Parameters lpInBuf Should be set to NULL. nInBufSize Should be set to zero. lpOutBuf Must point to a VERSIONINFO structure as defined by OEMIOCTL.H.
Chapter 7 — Programming IOCTL_HAL_WARMBOOT Causes the system to perform a warm-boot. The object store is retained. Usage #include “oemioctl.h” Syntax BOOL KernelIoControl( IOCTL_HAL_WARMBOOT,LPVOID lpInBuf,DWORD nInBufSize,LPVOID lpOutBuf,DWORD nOutBufSize,LPDWORD lpBytesReturned ); Parameters lpInBuf Should be set to NULL. lpInBufSize Should be set to zero. lpOutBuf Should be NULL. nOutBufSize Should be zero. Return Values None. IOCTL_HAL_COLDBOOT Causes the system to perform a cold-boot.
Chapter 7 — Programming IOCTL_HAL_GET_RESET_INFO This IOCTL code allows software to check the type of the most recent reset. Usage #include “oemioctl.h” Syntax BOOL KernelIoControl( IOCTL_HAL_GET_RESET_INFO,LPVOID lpInBuf,DWORD nInBufSize,LPVOID lpOutBuf,DWORD nOutBufSize,LPDWORD lpBytesReturned ); Parameters lpInBuf Should be set to NULL. lpInBufSize Should be set to zero. lpOutBuf Must point to a HAL_RESET_INFO structure. See sample below. nOutBufSize The size of HAL_RESET_INFO in bytes.
Chapter 7 — Programming IOCTL_HAL_GET_BOOT_DEVICE This IOCTL code allows software to check which device CE booted from. Usage #include “oemioctl.h” Syntax BOOL KernelIoControl( IOCTL_HAL_GET_BOOT_DEVICE,LPVOID lpInBuf,DWORD nInBufSize,LPVOID lpOutBuf,DWORD nOutBufSize,LPDWORD lpBytesReturned ); Parameters lpInBuf Should be set to NULL. lpInBufSize Should be set to zero. lpOutBuf Must point to a buffer large enough to hold a DWORD (4 bytes) that contains the boot device.
Chapter 7 — Programming IOCTL_HAL_REBOOT Causes the system to perform a warm-boot. The object store is retained. Usage #include “oemioctl.h” Syntax BOOL KernelIoControl( IOCTL_HAL_REBOOT,LPVOID lpInBuf,DWORD nInBufSize,LPVOID lpOutBuf,DWORD nOutBufSize,LPDWORD lpBytesReturned ); Parameters lpInBuf Should be set to NULL. lpInBufSize Should be set to zero. lpOutBuf Should be NULL. nOutBufSize Should be zero. Return Values None.
Chapter 7 — Programming IOCTL_PROCESSOR_INFORMATION Returns processor information. Usage #include “pkfuncs.h” Syntax BOOL KernelIoControl( IOCTL_PROCESSOR_INFORMATION,LPVOID lpInBuf,DWORD nInBufSize,LPVOID lpOutBuf,DWORD nOutBufSize,LPDWORD lpBytesReturned ); Parameters lpInBuf Should be set to NULL. nInBufSize Should be set to zero. lpOutBuf Should be a pointer to the PROCESSOR_INFO structure. The PROCESSOR_INFO structure stores information that describes the CPU more descriptively.
Chapter 7 — Programming IOCTL_GET_CPU_ID Returns Xscale processor ID. Usage #include “oemioctl.h” Syntax BOOL KernelIoControl( IOCTL_GET_CPU_ID,LPVOID lpInBuf, DWORD nInBufSize,LPVOID lpOutBuf,DWORD nOutBufSize,LPDWORD lpBytesReturned ); Parameters lpInBuf Should point to a CPUIdInfo structure defined in OEMIOCTL.H. lpInBufSize Should be sizeof(CPUIdInfo). lpOutBuf Should be NULL. nOutBufSize Should be set to 0.
Chapter 7 — Programming Network Selection APIs The Network Selection APIs change the network adapter configuration programmatically. Both drivers support the same IOCTL function numbers for loading and unloading the drivers. Loading and unloading of the 802.11b or 802.11b/g driver is performed by the FWL1: device in the system by performing DeviceIOControl() calls to the driver.
Chapter 7 — Programming The API provided by Intermec Technologies exposes a limited set of routines that allows a programmer to access and affect the 802.11b or 802.11b/g network interface card from within their application. The routines provided also reads/writes values to the CE registry that pertain to the 802.11b or 802.11b/g radio driver. By using the provided functions, a programmer can alter the 802.11b or 802.
Chapter 7 — Programming Basic Connect/Disconnect Functions Below are functions available for the 700 Color Computer when enabled with the 802.11b or 802.11b/g radio module. RadioConnect() Connects to the available radio. Use this function if you plan on using a lot of API calls that talk directly to the radio. Note that the 802.11b or 802.11b/g radio must be enabled via NDISTRAY before you can connect to it. Syntax UINT RadioConnect( ); Parameters None.
Chapter 7 — Programming RadioDisassociate() Call this function to have the 802.11b or 802.11b/g radio disassociate from the current service set. The radio then enters an “off” mode until it is woken again by setting the Service Set Identifier (SSID). Also, the NDIS driver generates an NDIS media disconnect event. Syntax UINT RadioDisassociate( ); Parameters None. Return Values ERROR_SUCCESS when successful, otherwise ERR_CONNECT_FAILED. Remarks None.
Chapter 7 — Programming GetAuthenticationMode() Call this function to obtain the radio’s current authentication mode. Syntax UINT GetAuthenticationMode( ULONG & ); Parameters NDIS_RADIO_AUTH_MODE_OPEN 802.11 Open Authentication. Indicates that the radio is using an open system. NDIS_RADIO_AUTH_MODE_SHARED 802.11 Shared Authentication. Indicates that the radio is using a shared key. NDIS_RADIO_AUTH_MODE_AUTO Auto switch between Open/Shared. Indicates automatic detection is used when available.
Chapter 7 — Programming GetDiversity() Call this function to get the current diversity setting of your 802.11b or 802.11b/g radio. This uses an optional NDIS5.1 OID to query the radio, of which a large number of 802.11b or 802.11b/g devices do not support. This may be inaccurate. Syntax UINT GetDiversity(USHORT *); Parameters ANT_PRIMARY The primary antenna is selected. ANT_SECONDARY The secondary antenna is selected.
Chapter 7 — Programming GetMac() Call this function to get the MAC address of the 802.11b or 802.11b/g radio. Syntax UINT GetMac( TCHAR * ); Parameters Pointer to a character array, which is populated with the MAC address after a successful call. Return Values ERROR_SUCCESS when successful, ERR_QUERY_FAILED when the query failed, or ERR_CONNECT_FAILED if a connection with the radio failed.
Chapter 7 — Programming GetNetworkType() Call this function to get the current network type of the radio. Do not confuse this with GetNetworkMode(). Syntax UINT GetNetworkType( ULONG & ); Parameters NDIS_NET_TYPE_FH Indicates this is a frequency hopping radio. NDIS_NET_TYPE_DS Indicates that this is a direct sequence radio. NDIS_NET_TYPE_UNDEFINED Indicates this radio type is unknown or undefined.
Chapter 7 — Programming GetPowerMode() Call this function to get the current power savings mode of the radio. Syntax UINT GetPowerMode( ULONG & ); Parameters NDIS_RADIO_POWER_MODE_CAM Continuous Access Mode (ie: always on). NDIS_RADIO_POWER_MODE_PSP Power Saving Mode. NDIS_RADIO_POWER_UNKNOWN Unknown power mode. NDIS_RADIO_POWER_AUTO Auto.
Chapter 7 — Programming GetTXPower() Call this function to get the current transmit power of the radio. Syntax UINT GetTXPower( ULONG & ); Parameters NDIS_POWER_LEVEL_63 63 mW NDIS_POWER_LEVEL_30 30 mW NDIS_POWER_LEVEL_15 15 mW NDIS_POWER_LEVEL_5 5 mW NDIS_POWER_LEVEL_1 1 mW NDIS_POWER_LEVEL_UNKNOWN Unknown Value or Error. Return Values ERROR_SUCCESS when successful, ERR_QUERY_FAILED when the query failed, or ERR_CONNECT_FAILED if a connection with the radio failed.
Chapter 7 — Programming GetWepStatus() Call this function to get the current state of the radio’s WEP and encryption levels. Syntax UINT GetWepStatus( ULONG & ); Parameters NDIS_ENCRYPTION_1_ENABLED WEP is enabled; TKIP and AES are not enabled, and a transmit key may or may not be available. (same as NDIS_RADIO_WEP_ENABLED) NDIS_ENCRYPTION_DISABLED Indicates that AES, TKIP, and WEP are disabled, and a transmit key is available.
Chapter 7 — Programming GetRadioIpAddress() Call this function to obtain a formatted string indicating whether DHCP is enabled, and what is the current adapters IP address. Syntax UINT GetRadioIpAddress( TCHAR * ); Parameters Pointer to a character array that contains the formatted string of the IP address and static/DHCP information. Return Values ERROR_SUCCESS when successful, ERR_QUERY_FAILED when the query failed, or ERR_CONNECT_FAILED if a connection with the radio failed.
Chapter 7 — Programming Set Information Functions AddWep() Call this function to add a WEP key to the radio. Call this function multiple times when adding more than one WEP key. Save the “default” key for last. For example, when adding four keys, and the second key is the default transmit key, add keys 1, 3 and 4 before you add key 2. Note: Add the default transmit key last. Syntax UINT AddWep( ULONG, BOOL, TCHAR * ); Parameters ULONG Specifies the key index to be set. Valid values are 0–3.
Chapter 7 — Programming EncryptionStatus() Call this function to set the desired encryption status. Syntax UINT EncryptionStatus( UINT mode ); Parameters NDIS_ENCRYPTION_1_ENABLED WEP is enabled; TKIP and AES are not enabled, and a transmit key may or may not be available. (same as NDIS_RADIO_WEP_ENABLED) NDIS_ENCRYPTION_DISABLED Indicates that AES, TKIP, and WEP are disabled, and a transmit key is available.
Chapter 7 — Programming SetAuthenticationMode() Call this function to set the desired authentication mode. Syntax UINT SetAuthenticationMode( ULONG ); Parameters NDIS_RADIO_AUTH_MODE_OPEN 802.11 Open Authentication. Indicates that the radio is using an open system. NDIS_RADIO_AUTH_MODE_SHARED 802.11 Shared Authentication. Indicates that the radio is using a shared key. NDIS_RADIO_AUTH_MODE_AUTO Auto switch between Open/Shared. Indicates automatic detection is used when available.
Chapter 7 — Programming SetNetworkMode() Call this function to set the desired Network Mode. Syntax UINT SetNetworkMode( ULONG ); Parameters NDIS_NET_MODE_IBSS 802.11 Ad-Hoc Mode. NDIS_NET_MODE_ESS 802.11 Infrastructure Mode. NDIS_NET_MODE_UNKNOWN Anything Else/Unknown Error NDIS_NET_AUTO_UNKNOWN Automatic Selection. Use of this option is not supported or recommended. NDIS_NET_TYPE_OFDM_5G 5 Gigahertz 54 Mbps NDIS_NET_TYPE_OFDM_2_4G 802.11 2.
Chapter 7 — Programming SetSSID() Call this function with a pointer to a null-terminated TCHAR array containing the desired SSID to set the desired SSID of the adapter. Syntax UINT SetSSID( TCHAR * ); Parameters Pointer to a character array that contains the desired SSID. This should be null-terminated. Return Values ERROR_SUCCESS when successful, ERR_QUERY_FAILED when the query failed, or ERR_CONNECT_FAILED if a connection with the radio failed.
Chapter 7 — Programming RemoveWep() Call this function with a key index of 0–3 to remove the WEP key at that index. Syntax UINT RemoveWep( ULONG ); Parameters ULONG value that specifies the key index to set. Valid values are 0–3. Return Values ERROR_SUCCESS when successful, ERR_QUERY_FAILED when the query failed, or ERR_CONNECT_FAILED if a connection with the radio failed. Remarks On disassociation with all BSSIDs of the current service set, WEP key is removed by the adapter.
Chapter 7 — Programming EnableZeroConfig() This enables or disables the Wireless Zero Configuration Wizard from Microsoft. After calling this function, a warm-boot is required for the change to take effect. Note: Enabling this function effectively disables all the SET commands in this API.
Chapter 7 — Programming isSupplicantRunning() Call this function to determine whether the security supplicant is running. Syntax UINT isSupplicantRunning( ); Parameters None. Return Values TRUE if the security supplicant is running, FALSE if it is not running. Remarks None.
Chapter 7 — Programming StopSupplicant() Call this function to stop the supplicant service. Syntax UINT StopSupplicant( ); Parameters None. Return Values ERROR_SUCCESS when successful. Remarks None. Definitions #ifdef DYNAMIC_LOADING typedef UINT (*PFN_StopSupplicant)(); #else UINT StopSupplicant(); #endif isDHCPEnabled() Call this function to determine whether DHCP is enabled on the current adapter. Syntax UINT isDHCPEnabled( ); Parameters None.
Chapter 7 — Programming GetCurrentDriverName() Call this function to populate the TCHAR array with the driver name. Syntax UINT GetCurrentDriverName( TCHAR * ); Parameters Pointer to a TCHAR array which contains the name of the driver when successful. Return Values ERROR_SUCCESS when successful. Remarks This function is called with a pointer to a TCHAR array that is large enough to hold the name of the driver PLUS the null terminator.
Chapter 7 — Programming SwitchPacketDriver() Call this function to switch between available packet drivers on the system. Syntax UINT SwitchPacketDriver( USHORT ); Parameters INTERMEC_PACKET_DRIVER Intermec Packet Driver (ZNICZIO) NDISUIO_PACKET_DRIVER Microsoft Packet Driver (NDISUIO) Return Values ERROR_SUCCESS when successful. Remarks After switching to a new packet driver, perform a warm boot for changes to take effect.
Chapter 7 — Programming Notifications Use the following information to programmatically control the vibrator, to write an application to turn on the vibrator when a message is received via the WLAN radio link, and turn it off when the user hits a key. Vibrator support is implemented in the NLED driver as a false LED. The vibrator is LED 5 and is identified with an CycleAdjust of –1. The vibrate option is only available in the notifications panel when the vibrator is present in the system.
Chapter 7 — Programming NLEDGetDeviceInfo Usage #include “nled.h” Syntax BOOL NLEDGetDeviceInfo ( UINT nInfoId, void *pOutput ); Parameters nInfoId pOutput Integer specifying the information to return. These values are defined: NLED_COUNT_INFO Indicates the pOutput buffer specifies the number of LEDs on the device. NLED_SUPPORTS_INFO_ID Indicates the pOutput buffer specifies information about the capabilities supported by the LED.
Chapter 7 — Programming Reboot Functions There are several methods, via Kernel I/O Control functions, that an application program can use to force the 700 Color Computer to reboot. IOCTL_HAL_REBOOT IOCTL_HAL_REBOOT performs a warm-boot. See page 263. IOCTL_HAL_COLDBOOT Invoking the KernelIOControl function with IOCTL_HAL_COLDBOOT forces a cold reboot. This resets the 700 Color Computer and reloads Windows CE as if a power-up was performed.
Chapter 7 — Programming Remapping the Keypad Note: Use caution when remapping the keypad. Improper remapping may render the keypad unusable. Data within the 700 Color Computer could also be lost, should any problems occur. Applications have the ability to remap keys on the 700 Color Numeric Keypad and 700 Color Alphanumeric Keypad. This will allow applications to enable keys that would otherwise not be available, such as the [F1] function key.
Chapter 7 — Programming Alpha (Blue) Plane The alpha plane contains values from the keypad when the keypad has been placed in alpha mode by pressing the blue alpha key, such as the following: Press the Keys Numeric Keypad Alphanumeric Keypad To Enter This [Alpha] F 1 [Alpha] d g Caps [Alpha] F 5 [Alpha] d J j [Alpha] F 9 [Alpha] d W w Key Values Key values for each plane are stored in the registry. All units ship with a default key mapping already loaded in the registry.
Chapter 7 — Programming How Key Values Are Stored in Registry To know which fields to update in the registry, you must know what Scan Codes are assigned to each physical key (see the “Keypad Scan Codes and Meanings” table on the next page). The Scan Code is used at the lowest level of the system to let the keypad driver know which physical key has been pressed.
Chapter 7 — Programming Scan Codes At the lowest driver level, the 700 Color Numeric Keypad and the 700 Color Alphanumeric Keypad identifies keys as scan codes. These scan codes are sent via the keypad microcontroller, and cannot be changed without modifying the keypad firmware.
Chapter 7 — Programming Numeric Keypad Scan Codes and Meanings (continued) Press this Key Meaning ScanCode e Enter/@ (at symbol) 0x1D 6 6/MNO/A4 0x1E None 0x1F–0x40 B Charge Detect 0x41 C LCD frontlight 0x42 b Ambient light 0x42 Threshold crossed 0x42 Headset detected 0x43 Keypad Backlight 0x44 Ambient Light 0x44 Threshold Crossed 0x44 b Alphanumeric Keypad The following scan codes pertain to the 700 Color Alphanumeric keypad: Alphanumeric Keypad Scan Codes and Meanings Press
Chapter 7 — Programming Alphanumeric Keypad Scan Codes and Meanings (continued) Press this Key Meaning ScanCode J J/PgUp 0x13 K K/@ (as symbol) 0x14 L L/– (minus sign) 0x15 M M/1 0x16 N N/2 0x17 I I/backlight 0x18 P P/PgDn 0x19 Q Q/, (comma) 0x1A R R/+ (plus sign) 0x1B S S/4 0x1C T T/5 0x1D O O/3 0x1E g Caps/Lock 0x1F h BkSp 0x20 V V/.
Chapter 7 — Programming Sample View of Registry Keys The following is a sample view of the current default key mapping for the 700 Color Numeric Keypad. See the registry on your device for the latest key mappings.
A Configurable Settings This appendix contains information about the Data Collection, Intermec Settings, SNMP, Unit Information, Utilities, and Wireless Network control panel applets that may be on the 700 Series Color Mobile Computer. Note: “700 Color” pertains to 740, 741, 750, 751, 760, and 761 Computers unless otherwise noted.
Appendix A — Configurable Settings Configuration Parameters A configuration parameter changes the way the 700 Color Computer operates, such as configuring a parameter to have the 700 Color Computer emit a very loud beep in a noisy environment. Use any of the following methods to execute configuration parameters: S Change Data Collection and SNMP parameters via control panel applets later in this appendix. S Send parameters from an SNMP management station.
Appendix A — Configurable Settings S Tap Refresh to discard changes and start again. Tap Yes when you are prompted to verify this action. About Configuration Parameters You can find this information about each configuration parameter: S Name and Purpose: Describes the parameter and its function. S Action: Describes what to do with a parameter once that parameter is selected. S SNMP OID: Lists the SNMP OID for the parameter.
Appendix A — Configurable Settings Data Collection Control Panel Applet Note: This applet is not available in units with PSM Build 3.00 or newer. To determine your PSM Build version, tap Start > Programs > File Explorer > the PSMinfo text file. If your unit has PSM Build 3.00 or newer, then you may have the Intermec Settings control panel applet in place of the Data Collection applet.
Appendix A — Configurable Settings Symbologies You can change bar code symbology parameter settings in your 700 Color Computer via the Data Collection control panel applet. The following parameters are for bar code symbologies. Additional information about the more common bar code symbologies are in Appendix B, “Bar Codes.” Note that these parameters are listed in the order of their appearance within this tab. Most of these symbologies apply to both the imager and the laser scanner tools.
Appendix A — Configurable Settings Code 39 Code 39 is a discrete, self-checking, variable length symbology. The character set is uppercase A–Z, 0–9, dollar sign ($), period (.), slash (/), percent (%), space ( ), plus (+), and minus (-). Action Tap (+) to expand the Code 39 parameter, select the setting to be changed, then tap an option to change this setting or select an option from the drop-down list. SNMP OID 1.3.6.1.4.1.1963.15.3.3.1.1.3.
Appendix A — Configurable Settings Standard 2 of 5 Standard 2 of 5 is a discrete and self-checking symbology that uses the bars to encode information and the spaces to separate the individual bars. Action Tap (+) to expand the Standard 2 of 5 parameter, select the setting to be changed, then tap an option to change this setting or select an option from the drop-down list. SNMP OID 1.3.6.1.4.1.1963.15.3.3.1.1.4.
Appendix A — Configurable Settings Codabar Codabar is a self-checking, discrete symbology. Action Tap (+) to expand the Codabar parameter, select a setting to be changed, then select an option from the drop-down list to change this setting. SNMP OID 1.3.6.1.4.1.1963.15.3.3.1.1.5.
Appendix A — Configurable Settings UPC/EAN UPC/EAN are fixed-length, numeric, continuous symbologies that use four element widths. Action Tap (+) to expand the UPC/EAN parameter, select the setting to be changed, then select an option to change this setting. SNMP OID 1.3.6.1.4.1.1963.15.3.3.1.1.6.
Appendix A — Configurable Settings Code 93 Code 93 is a variable length, continuous symbology that uses four element widths. Action Tap the Code 93 parameter, then select an option to change this parameter setting. Tap (+) to access the Code 93 Lengths parameter. SNMP OID 1.3.6.1.4.1.1963.15.3.3.1.1.7.1 Options 0 1 Not active (default) Active Code 93 Length Sets the Code 93 bar code length. Action Tap (+) to expand the Code 93 parameter, then tap (+) to expand the Code 93 Lengths parameter.
Appendix A — Configurable Settings Code 128 Code 128 is a variable-length, continuous, high-density, alphanumeric symbology that uses multiple element widths and supports the extended ASCII character set. Action Tap the Code 128 parameter, then select an option to change this parameter setting. SNMP OID 1.3.6.1.4.1.1963.15.3.3.1.1.9.1 Options 0 1 Not active (default) Active This illustration is from a 700 Color Computer using a laser scanner.
Appendix A — Configurable Settings Code 128 Options Set the following for the Code 128 parameter. Note that the EAN 128 ]C1 and CIP 128 French Pharmaceutical options are not available when you use an imager with your 700 Color Computer. Action Tap (+) to expand the Code 128 Options parameter, select a setting, then select an option to change this setting. SNMP OID None.
Appendix A — Configurable Settings Code 128 FNC1 Character The Code 128 FNC1 character (EAN 128 norms) can be any ASCII character and is used as a separator when multiple identifiers and their fields are concatenated. Note that this is not available when you use an imager with your 700 Color Computer. Non-printable ASCII characters can be entered using the following syntax where HH is the hexadecimal value of the character.
Appendix A — Configurable Settings Plessey Plessey is a pulse-width modulated symbology like most other bar codes. It includes a start character, data characters, an eight-bit cyclic check digit, and a termination bar. The code is continuous and not self-checking. You need to configure two parameters for Plessey code: Start Code and Check Digit. Note that this is not available when you use an imager with your 700 Color Computer.
Appendix A — Configurable Settings MSI MSI is a symbology similar to Plessey code (page 312) that includes a start pattern, data characters, one or two check digits, and a stop pattern. Note that this is not available when you use an imager with your 700 Color Computer. Action Tap (+) to expand the MSI parameter, select the setting to be changed, then select an option to change this setting or select an option from the drop-down list. SNMP OID 1.3.6.1.4.1.1963.15.3.3.1.1.15.
Appendix A — Configurable Settings PDF417 PDF417 is a stacked two-dimensional symbology that provides the ability to scan across rows of code. Each row consists of start/stop characters, row identifiers, and symbol characters, which consist of four bars and four spaces each and contain the actual data. This symbology uses error correction symbol characters appended at the end to recover loss of data.
Appendix A — Configurable Settings S Select Unbuffered for multi-label PDF417 messages that are too long for the Sabre buffer (memory overflow). Each part of the PDF417 label is transmitted separately, and the host application must then assemble the message using the macro PDF control header transmitted with each label. Control Header is only present in macro PDF codes and is always transmitted with unbuffered option.
Appendix A — Configurable Settings Micro PDF417 Micro PDF417 is a multi-row symbology derived from and closely based on PDF417 (page 314). A limited set of symbology sizes is available, together with a fixed level of error correction for each symbology size. Note that this is not available when you use an imager with your 700 Color Computer.
Appendix A — Configurable Settings Interleaved 2 of 5 Interleaved 2 of 5 (I 2 of 5) is a high-density, self-checking, continuous, numeric symbology used mainly in inventory distribution and the automobile industry. Note: An Interleaved 2 of 5 bar code label must be at least three characters long for the 700 Color Computer to scan and decode correctly.
Appendix A — Configurable Settings Matrix 2 of 5 Matrix 2 of 5 is a numerical symbology. Note that this is not available when you use an imager with your 700 Color Computer. Action Tap (+) to expand the Matrix 2 of 5 parameter, select the setting to be changed, then tap an option to change this setting or select an option from the drop-down list. SNMP OID 1.3.6.1.4.1.1963.15.3.3.1.1.24.
Appendix A — Configurable Settings Telepen Telepen is an alphanumeric, case-sensitive, full ASCII symbology. Note that this is not available when you use an imager with your 700 Color Computer. Action Tap (+) to expand the Telepen parameter, select the setting to be changed, then tap an option to change this setting. SNMP OID 1.3.6.1.4.1.1963.15.3.3.1.1.25.
Appendix A — Configurable Settings Code 11 Code 11 is a high density, discrete numeric symbology that is extensively used in labeling telecommunications components and equipment. Note that this is not available when you use an imager with your 700 Color Computer. Action Tap (+) to expand the Code 11 parameter, select the setting to be changed, then tap an option to change this setting. SNMP OID 1.3.6.1.4.1.1963.15.3.3.1.1.26.
Appendix A — Configurable Settings QR Code QR Code (Quick Response Code) is a two-dimensional matrix symbology containing dark and light square data modules. It has position detection patterns on three of its four corners and features direct encodation of the Japanese Kana-Kanji character set. It can encode up to 2509 numeric or 1520 alphanumeric characters and offers three levels of error detection.
Appendix A — Configurable Settings Data Matrix A two-dimensional matrix symbology, which is made of square modules arranged within a perimeter finder pattern. The symbology utilizes Error Checking and Correcting (ECC) algorithm with selectable levels for data error recovery and Cyclic Redundancy Check algorithm to validate the data. The character set includes either 128 characters conforming to ISO 646 (ANSI X3.4 - 1986) or 256 extended character set.
Appendix A — Configurable Settings MaxiCode MaxiCode is a fixed-size 2-D matrix symbology which is made up of offset rows of hexagonal elements arranged around a unique circular finder pattern. ASCII data is encoded in six-bit symbol characters. The symbol contains 33 rows which are alternately 30 and 29 elements wide. There are five different code sets. A single MaxiCode symbol can encode up to 93 characters of data.
Appendix A — Configurable Settings Symbology Options To access the settings from the 700 Color Computer, tap Start > Settings > the System tab > the Data Collection icon to access its control panel applet. Use the right and left arrows to scroll to the Symbology Options tab, then tap this tab to access its parameters. The following are parameters for bar code symbology options. Note that these are listed in the order of their appearance within the Symbology Options tab.
Appendix A — Configurable Settings Code 39 User ID If “1” was selected in the Symbology ID parameter, you can set your own ASCII character to identify Code 39 bar code data. Note that this is not available when you use an imager with your 700 Color Computer. Action: Tap (+) to expand the Symbology ID parameter, select the Code 39 user ID parameter, then enter a user ID value to change this parameter setting. SNMP OID: 1.3.6.1.4.1.1963.15.3.3.4.1.3.1 Options: x where x is a single ASCII character.
Appendix A — Configurable Settings Code 93 User ID If “1” was selected in the Symbology ID parameter, you can set your own ASCII character to identify Code 93 bar code data. Note that this is not available when you use an imager with your 700 Color Computer. Action: Tap (+) to expand the Symbology ID parameter, select the Code 93 user ID parameter, then enter a user ID value to change this parameter setting. SNMP OID: 1.3.6.1.4.1.1963.15.3.3.4.1.4.1 Options: x where x is a single ASCII character.
Appendix A — Configurable Settings Plessey User ID If “1” was selected in the Symbology ID parameter, you can set your own ASCII character to identify Plessey bar code data. Note that this is not available when you use an imager with your 700 Color Computer. Action: Tap (+) to expand the Symbology ID parameter, select the Plessey user ID parameter, then enter a user ID value to change this parameter setting. SNMP OID: 1.3.6.1.4.1.1963.15.3.3.4.1.13.1 Options: x where x is a single ASCII character.
Appendix A — Configurable Settings EAN 8 User ID If “1” was selected in the Symbology ID parameter, you can set your own ASCII character to identify EAN-8 bar code data. Note that this is not available when you use an imager with your 700 Color Computer. Action: Tap (+) to expand the Symbology ID parameter, select the EAN 8 user ID parameter, then enter a user ID value to change this parameter setting. SNMP OID: 1.3.6.1.4.1.1963.15.3.3.4.1.8.1 Options: x where x is a single ASCII character.
Appendix A — Configurable Settings Code 11 User ID If “1” was selected in the Symbology ID parameter, you can set your own ASCII character to identify Code 11 bar code data. Note that this is not available when you use an imager with your 700 Color Computer. Action: Tap (+) to expand the Symbology ID parameter, select the Code 11 user ID parameter, then enter a user ID value to change this parameter setting. SNMP OID: 1.3.6.1.4.1.1963.15.3.3.4.1.16.1 Options: x where x is a single ASCII character.
Appendix A — Configurable Settings Prefix Prepends a string of up to 20 ASCII characters to all scanned data. Action Tap the Prefix parameter, then enter a prefix value to change this parameter setting. SNMP OID 1.3.6.1.4.1.1963.15.3.3.4.1.29.1 Options Acceptable values are up to 20 ASCII characters. Embedded null () characters are not allowed. Default is no characters (disabled).
Appendix A — Configurable Settings Suffix Appends a string of up to 20 ASCII characters to all scanned data. Action Tap the Suffix parameter, then enter a suffix value to change this parameter setting. SNMP OID 1.3.6.1.4.1.1963.15.3.3.4.1.30.1 Options Acceptable values are up to 20 ASCII characters. Embedded null () characters are not allowed. Default is no characters (disabled).
Appendix A — Configurable Settings Beeper/LED To access the settings from the 700 Color Computer, tap Start > Settings > the System tab > the Data Collection icon to access its control panel applet. Use the right and left arrows to scroll to the Beeper/LED tab, then tap this tab to access its parameters. Most of these functions are not available when using an imager. The following table shows which functions are supported either by an imager or by a laser scanner.
Appendix A — Configurable Settings Beeper Sets the volume for the good read beep. Note that this is not available when you use a laser scanner with your 700 Color Computer. Action Tap the Beeper parameter, then select an option to change this parameter setting. SNMP OID 1.3.6.1.4.1.1963.15.3.1.4.1.6.
Appendix A — Configurable Settings Beeper Volume Sets the volume for the good read beep. Note that this is not available when you use an imager with your 700 Color Computer. Action Tap the Beeper volume parameter, then select an option to change this parameter setting. SNMP OID 1.3.6.1.4.1.1963.15.3.1.4.1.6.
Appendix A — Configurable Settings Beeper Frequency Sets the frequency for the good read beep. Note that this is not available when you use an imager with your 700 Color Computer. Action Tap the Beeper frequency parameter, then enter a frequency value to change this parameter setting. SNMP OID 1.3.6.1.4.1.1963.15.3.1.4.1.7.
Appendix A — Configurable Settings Good Read Beeps Sets the number of good read beeps. Note that this is not available when you use an imager with your 700 Color Computer. Action Tap the Good read beeps parameter, then select an option to change this parameter setting. SNMP OID 1.3.6.1.4.1.1963.15.3.1.4.1.8.
Appendix A — Configurable Settings Good Read Beep Duration Sets the duration of the good read beep. Note that this is not available when you use an imager with your 700 Color Computer. Action Tap the Good read beep duration parameter, then enter a duration value to change this parameter setting. SNMP OID 1.3.6.1.4.1.1963.15.3.1.4.1.9.1 Options 0–2550 Beep duration in milliseconds.
Appendix A — Configurable Settings Imager Note: These instructions do not apply to the 730 Computer. To access the settings from the 700 Color Computer, tap Start > Settings > the System tab > Data Collection to access its control panel applet. Use the right and left arrows to scroll to the Imager tab, then tap this tab to access its parameters. The following are parameters for the imager. Note that these are listed in the order of their appearance within the Imager tab.
Appendix A — Configurable Settings Sticky Aimer Duration The Sticky Aimer Duration controls the time the Aimer LED stays on after the a bar code read completes or after the trigger button is released. Note that this is not available when you use a laser scanner with your 700 Color Computer. Action Tap the Sticky Aimer Duration parameter, then enter a value to change this setting. Note that values must be in 50 ms increments, such as 500, 650, or 32500.
Appendix A — Configurable Settings Image Dimension The image dimensions control the vertical size of the image for decoding. This can restrict the image to one bar code when otherwise, there might be more than one bar code in the image to be decoded. Note that this is not available when you use a laser scanner with your 700 Color Computer. Action Tap the Image dimension parameter, select the position to be changed, then tap an option or enter a value to change this position. SNMP OID 1.3.6.1.4.1.1963.15.
Appendix A — Configurable Settings Lighting Mode The Lighting Mode sets the lighting mode of the imager. When set to “LED Priority,” the imager depends more on ambient lighting to illuminate the bar code for reading. When set to “Aperture Priority,” the imager uses its built-in LED to illuminate the bar code for reading. Note that this is not available when you use a laser scanner with your 700 Color Computer. Action Tap the Lighting Mode parameter, then select an option to change this parameter setting.
Appendix A — Configurable Settings 1D OmniDir Decode Enable The 1D OmniDir Decode Enable affects the scanning abilities of the IT4000 Imager. With 1D omni directional enabled, the imager is able to decode images and bar code labels regardless of the orientation of the label. With 1D omni directional disabled, the imager only decodes labels in the direction of the aimer LED. Note that this is not available when you use a laser scanner with your 700 Color Computer.
Appendix A — Configurable Settings Virtual Wedge To access the settings from the 700 Color Computer, tap Start > Settings > the System tab > Data Collection to access its control panel applet. Use the right and left arrows to scroll to the Virtual Wedge tab, then tap this tab to access its parameters. The following are parameters for the virtual wedge scanner. Note that these are listed in the order of their appearance within the Virtual Wedge tab.
Appendix A — Configurable Settings Preamble Sets the preamble that precedes any data you scan with the 700 Color Computer. Common preambles include a data location number or an operator number. Action Tap the Preamble parameter, then enter a preamble value to change this parameter setting. SNMP OID 1.3.6.1.4.1.1963.15.3.2.1.1.3.1 Syntax ADdata where data is any acceptable values up to 31 ASCII characters. Embedded null () characters are not allowed.
Appendix A — Configurable Settings Note: When you enter the AD command without data, the preamble is disabled. If you want to use quotation marks or the following combinations of characters as part of the appended data, separate those characters from the AD command with quotes.
Appendix A — Configurable Settings Postamble Sets the postamble that is appended to any data you scan with the 700 Color Computer. Common postambles include cursor controls, such as tabs or carriage return line feeds. Action Tap the Postamble parameter, then enter a postamble value to change this parameter setting. SNMP OID 1.3.6.1.4.1.1963.15.3.2.1.1.4.1 Syntax AEdata where data is any acceptable values up to 31 ASCII characters. Embedded null () characters are not allowed.
Appendix A — Configurable Settings Note: When you enter the AE command without data, the postamble is disabled. If you want to use quotation marks or the following combinations of characters as part of the appended data, separate those characters from the AE command with quotes. If you do not use quotes as described here, the 700 Color Computer interprets the characters as another configuration command.
Appendix A — Configurable Settings Grid Sets the virtual wedge grid, which filters the data coming from this 700 Color Computer. The data server supports data filtering, which allows you to selectively send scanned data. The virtual wedge grid is similar to the “format” argument of the C Runtime Library scan function. Action Tap the Grid parameter, then enter a grid value to change this parameter setting. SNMP OID 1.3.6.1.4.1.1963.15.3.2.1.1.5.
Appendix A — Configurable Settings Code Page Sets the virtual wedge code page. The code page controls the translation from the character set of the raw collected data to Unicode, which is the character set expected by Windows CE applications. The default code page is 1252, which is the Windows Latin 1 (ANSI) character set. Action Tap the Code Page parameter, then select an option to change this parameter setting. SNMP OID 1.3.6.1.4.1.1963.15.3.2.1.1.6.
Appendix A — Configurable Settings Intermec Settings Control Panel Applet You may have the Intermec Settings control panel applet. Information about the settings you can configure with this applet is described in the Intermec Computer Command Reference Manual. The online manual is available from the Intermec web site at www.intermec.com. See the Data Collection Resource Kit in the IDL for information about data collection functions. The IDL is available as a download from the Intermec web site at www.
Appendix A — Configurable Settings SNMP Control Panel Applet Note: This applet is not available in units with PSM Build 3.00 or newer. To determine your PSM build version, tap Start > Programs > File Explorer > the PSMinfo text file. If your unit has PSM Build 3.00 or newer, then you may have the Intermec Settings control panel applet in place of the SNMP applet.
Appendix A — Configurable Settings Security To access the settings from the 700 Color Computer, tap Start > Settings > the System tab > SNMP > the Security tab to access its parameters. The following are parameters that affect encryption and community strings. Note that these are listed in the order of their appearance within the Security tab. Read Only Community Sets the read-only community string for this 700 Color Computer, which is required for processing of SNMP get and get next requests.
Appendix A — Configurable Settings Read/Write Community Sets the read/write community string, which is required for processing of SNMP set requests by this 700 Color Computer. An SNMP packet with this name as the community string will also process SNMP get and next requests. Action Tap the Read/Write Community parameter, then enter a community string to change this parameter setting. SNMP OID 1.3.6.1.4.1.1963.10.5.1.3.0 Options The read/write community string can be up to 128 ASCII characters.
Appendix A — Configurable Settings Read Encryption Sets the packet-level mode of security for SNMP read-only requests. If you enable read encryption, all received SNMP get and get next packets have to be encrypted or the packet will not be authorized. If encryption is enabled, you can only use software provided by Intermec Technologies. Note: To enable security encryption, you also need to set the Security Encryption Key (page 356).
Appendix A — Configurable Settings Write Encryption Sets the packet-level mode of security for SNMP read/write requests. If you enable write encryption, all SNMP packets that are received with the read/write community string have to be encrypted or the packet will not be authorized. You need to use software from Intermec Technologies that supports encryption. Note: To enable security encryption, you also need to set the Security Encryption Key (page 356).
Appendix A — Configurable Settings Encryption Key Identifies the key that this 700 Color Computer uses to encrypt or decipher SNMP packets. Encryption is used only by software provided by Intermec Technologies. If encryption is enabled, SNMP management platforms will not be able to communicate with the 700 Color Computer. The encryption key is returned encrypted. Action Tap the Encryption Key parameter, then enter a security encryption key value to change this parameter setting.
Appendix A — Configurable Settings Traps To access the settings from the 700 Color Computer, tap Start > Settings > the System tab > SNMP > the Traps tab to access its parameters. The following are authentication and threshold parameters for traps. Note that these are listed in the order of their appearance within the Traps tab. Authentication Determines whether to send authentication traps.
Appendix A — Configurable Settings Threshold Determines the maximum number of traps per second that the master agent generates. If the threshold is reached, the trap will not be sent. Action Tap the Threshold parameter, then enter a threshold value to change this parameter setting. SNMP OID 1.3.6.1.4.1.1963.10.5.2.3.0 Options Any positive integer value. Default is 10.
Appendix A — Configurable Settings Identification To access the settings from the 700 Color Computer, tap Start > Settings > the System tab > SNMP > the Identification tab to access its parameters. The following are parameters for contact, location, and name information for support purposes. Note that these are listed in the order of their appearance within the Identification tab. Contact Sets the contact information for the person responsible for this 700 Color Computer.
Appendix A — Configurable Settings Name Sets the assigned name for this 700 Color Computer. Action Tap the Name parameter, then enter the name of your 700 Color Computer to change this parameter setting. SNMP OID 1.3.6.1.2.1.1.5.0 Options The identification name may be up to 255 ASCII characters. Default is no characters or blank.
Appendix A — Configurable Settings Location Sets the identification location for this 700 Color Computer, such as “Shipping.” Action Tap the Location parameter, then enter the location of where your 700 Color Computer to change this parameter setting. SNMP OID 1.3.6.1.2.1.1.6.0 Options The identification location may be up to 255 ASCII characters. Default is no characters or blank.
Appendix A — Configurable Settings Unit Information Control Panel Applet Note: This applet is not available in units with PSM Build 3.00 or newer. To determine your PSM build version, tap Start > Programs > File Explorer > the PSMinfo text file. If your unit has PSM Build 3.00 or newer, then you may have the Intermec Settings control panel applet in place of the Unit Information applet.
Appendix A — Configurable Settings Battery Status You can view the battery status for your 700 Color Computer by accessing the Unit Information control panel applet. To access the settings from the 700 Color Computer, tap Start > Settings > the System tab > Unit Information > the Battery Status tab to view the current status. Tap ok to exit this information.
Appendix A — Configurable Settings CAB Files You can view the latest developer or released version of each CAB file from Intermec Technologies Corporation that are installed in your 700 Color Computer via the Unit Information control panel applet. Custom CAB files are not displayed in this applet. See the Software Tools User’s Manual for more information about these files.
Appendix A — Configurable Settings S S9C Upgrade: Installs the files needed to upgrade the S9C scanner firmware. See the 700 Color Management Tools for information on upgrading the firmware. S WinCfg: Configures the NRINET.INI file, launches the NRINet client, and loads and unloads the LAN and WLAN device drivers. S Wireless Printing Sample: Installs a sample application that developers can use for reference when they are developing their own Wireless Printing applications.
Appendix A — Configurable Settings Utilities Control Panel Applet The Utilities control panel applet examines and modifies settings and operational modes of specific hardware and software on the 700 Color Computer, including the dock switch, registry storage, wakeup mask, and application launch keys. To access the settings from the 700 Color Computer, tap Start > Settings > the System tab > Utilities to access its control panel applet.
Appendix A — Configurable Settings Registry Save From the 700 Color Computer, tap Start > Settings > the System tab > Utilities > the Registry Save tab to access the Registry Save control panel applet. For Windows Mobile 2003, the only medium available for saving the registry is the Flash File System (PSM). Registry data is stored in the “\Flash_File_Store\Registry” path. Check Enable Registry Storage to enable this function.
Appendix A — Configurable Settings Wakeup Mask From the 700 Color Computer, tap Start > Settings > the System tab > Utilities > the Wakeup Mask tab to access the Wakeup Mask control panel applet. This applet programs three scanner buttons and the A1 and A2 application keys to be “wakeup” or resume keys. That is, to prompt the 700 Color Computer to “wake up” or resume activity after going to “sleep” as a result of being inactive after a length of time.
Appendix A — Configurable Settings App Launch From the 700 Color Computer, tap Start > Settings > the System tab > Utilities , then scroll to the right to tap the App Launch tab to access the Application Launch control panel applet. This applet programs or maps two scanner buttons and four application keys to start up to six applications. Note that the left scanner button also acts as the record button.
Appendix A — Configurable Settings Note; You cannot map an application to more than one button. Should you assign the same application to two buttons, a verification prompt will appear after the second button to confirm whether you want to remap the application. If you tap Yes, the applet changes the first button to “unassigned” and map the application to the second button. Note: All changes are activated immediately upon selection.
Appendix A — Configurable Settings Wireless Network Control Panel Applet Note: See Chapter 4, “Network Support,” for information about the 802.11b or 802.11b/g radio module. About the Wireless Network Your wireless adapter (network interface card) connects to wireless networks of two types: infrastructure networks and ad-hoc networks. S Infrastructure networks get you onto your corporate network and the internet.
Appendix A — Configurable Settings S TKIP (Temporal Key Integrity Protocol) This protocol is part of the IEEE 802.11i encryption standard for wireless LANs., which provides per-packet key mixing, a message integrity check and a re-keying mechanism, thus overcoming most of the weak points of WEP. This encryption is more difficult to crack than the standard WEP.
Appendix A — Configurable Settings Configuring Your Wireless Network To start 802.11b or 802.11b/g communications on the 700 Color Computer, tap Start > Settings > the System tab > Wireless Network to access the Profile Wizard for the 802.11b or 802.11b/g radio module. A profile contains all the information necessary to authenticate you to the network, such as login name, password or certificate, and protocols by which you are authenticated. You can have up to four profiles for different networks.
Appendix A — Configurable Settings Basic Use the Basic page to set the network type, name, and manage battery power for this profile. Tap ok or OK to return to the Profiles page. S Profile Label: Enter a unique name for your profile. S Network type: Tap the drop-down list to select either “Infrastructure” if your network uses access points to provide connectivity to the corporate network or internet; or “Ad-Hoc” to set up a private network with one or more participants.
Appendix A — Configurable Settings Security The following are available from the 8021x Security drop-down list. Note that the last four methods are available if you have purchased the security package. Contact your Intermec representative for information. S None (below) S PEAP (page 378) S TLS (page 382) S TTLS (page 385) S LEAP (page 389) None Use “None” to disable 802.11b or 802.11b/g Security and enable either WEP or WPA-PSK encryption. To Disable 802.1x Security 1 Set 8021x Security as “None.
Appendix A — Configurable Settings To Enable WEP Encryption 1 Set 8021x Security as “None.” 2 Set Association to either “Open” if WEP keys are not required; or “Shared” when WEP keys are required for association. 3 Set Encryption to “WEP.” See page 372 for information about WEP encryption.
Appendix A — Configurable Settings To Enable WPA Encryption Using a Preshared Key 1 Set 8021x Security as “None.” 2 Set Association to “WPA.” See page 372 for information about WPA encryption. 3 Skip Encryption as it is automatically set to “TKIP.” See page 372 for more information about TKIP. 4 Enter the temporal key as ASCII (12345) in the Pre-Shared Key field.
Appendix A — Configurable Settings PEAP (Protected EAP) This protocol is suitable for performing secure authentication against Windows domains and directory services. It is comparable to EAP-TTLS (see page 385), both in its method of operation and its security, though not as flexible. This does not support the range of inside-the-tunnel authentication methods supported by EAP-TTLS. Microsoft and Cisco both support this protocol.
Appendix A — Configurable Settings To Enable PEAP with WPA Encryption 1 Set 8021x Security as “PEAP.” 2 Set Association to “WPA.” See page 372 for information about WPA encryption. 3 Skip Encryption as it is automatically set to “TKIP.” See page 372 for more information about TKIP. 4 Enter your unique user name and password to use this protocol.
Appendix A — Configurable Settings To Enable PEAP with Network EAP 1 Set 8021x Security as “PEAP.” 2 Set Association to “Network EAP.” See page 371 for information about EAP. 3 Set Encryption to either “WEP” or “CKIP.” See page 371 for information about CKIP and page 372 for information about WEP encryption. 4 Enter your unique user name and password to use this protocol.
Appendix A — Configurable Settings Additional Settings 1 Select an authentication method from the Inner PEAP Authentication drop-down list. EAP/MS-CHAP-V2 Authenticates against a Windows Domain Controller and other non-Windows user databases. This is Microsoft’s implementation of PEAP. EAP/Token Card Use with token cards. The password value entered is never cached. This is Cisco’s implementation of PEAP. EAP/MD5-Challenge Message Digest 5. A secure hashing authentication algorithm.
Appendix A — Configurable Settings TLS (EAP-TLS) EAP-TLS is a protocol that is based on the TLS (Transport Layer Security) protocol widely used to secure web sites. This requires both the user and authentication server have certificates for mutual authentication. While cryptically strong, this requires corporations that deploy this to maintain a certificate infrastructure for all their users.
Appendix A — Configurable Settings To Enable TLS with WPA Encryption 1 Set 8021x Security as “TLS.” 2 Set Association to “WPA.” See page 372 for information about WPA encryption. 3 Skip Encryption as it is automatically set to “TKIP.”See page 372 for more information about TKIP. 4 Enter your unique Subject Name and User Name as credentials for this profile. 5 Tap Get Certificates to obtain or import server certificates. See page 388 for more information.
Appendix A — Configurable Settings Additional Settings 1 Check Validate Server Certificate to verify the identity of the authentication server based on its certificate when using PEAP or TLS. 2 Enter the Common Names of trusted servers. Note that if these fields are left blank, the server certificate trust validation is not performed or required. 3 Click ok to return to the Security page.
Appendix A — Configurable Settings TTLS (EAP-Tunneled TLS) This protocol provides authentication like EAP-TLS (see page 382) but does not require certificates for every user. Instead, authentication servers are issued certificates. User authentication is done using a password or other credentials that are transported in a securely encrypted “tunnel” established using server certificates.
Appendix A — Configurable Settings To Enable TTLS with WPA Encryption 1 Set 8021x Security as “TTLS.” 2 Set Association to “WPA.” See page 372 for information about WPA encryption. 3 Skip Encryption as it is automatically set to “TKIP.” See page 372 for more information about TKIP. 4 Enter your unique user name and password to use this protocol.
Appendix A — Configurable Settings Additional Settings 1 Select an authentication protocol from the Inner TTLS Authentication drop-down list: PAP Password Authentication Protocol. A simple authentication protocol that sends security information in the clear. CHAP Challenge Handshake Authentication Protocol. Use of Radius to authenticate a terminal without sending security data in the clear. Authenticates against non-Windows user databases.
Appendix A — Configurable Settings To Get Certificates Certificates are pieces of cryptographic data that guarantee a public key is associated with a private key. They contain a public key and the entity name that owns the key. Each certificate is issued by a certificate authority. Use this page to import a certificate onto the 700 Color Computer. Root Certificates 1 Tap the <<< button next to the Import Root Certificate field to select the root certificate (DER-encoded .CER file) to import.
Appendix A — Configurable Settings LEAP (Cisco Lightweight EAP) LEAP is the Cisco Lightweight version of EAP. See page 371 for information about EAP. Use “LEAP” to configure the use of LEAP as an authentication protocol, select “Open,” “WPA,” or “Network EAP” as an association mode, or assign Network EAP. Note that this defaults to the Network EAP. To Enable LEAP with an Open Association 1 Set 8021x Security as “LEAP.” 2 Set Association to “Open.” 3 Skip Encryption as it is automatically set to “WEP.
Appendix A — Configurable Settings To Enable LEAP with WPA Encryption 1 Set 8021x Security as “LEAP.” 2 Set Association to “WPA.” See page 372 for information about WPA encryption. 3 Skip Encryption as it is automatically set to “TKIP.” See page 372 for more information about TKIP. 4 Enter your unique User Name to use this protocol.
Appendix A — Configurable Settings To Enable LEAP with Network EAP 1 Set 8021x Security as “LEAP.” 2 Set Association to “Network EAP,” an EAP protocol for the network. See page 371 for information about EAP. 3 Set Encryption to either “WEP” or “CKIP.” See page 371 for information about CKIP and page 372 for information about WEP encryption. 4 Enter your unique User Name to use this protocol.
Appendix A — Configurable Settings Advanced Use this page to configure additional settings for this profile. Tap ok or OK to return to the Profiles page. S Detect Rogue APs: Wireless NICs and APs associate based on the SSID configured for the NIC. Given an SSID, the BSSID with the strongest signal is often chosen for association. After association, 802.1x authentication may occur and during authentication credentials to uniquely identify a user — these are passed between the NIC and the AP. The base 802.
Appendix A — Configurable Settings Other Configurable Parameters The following parameters can be configured by sending reader commands through the network or from an application. See “Using Reader Commands” on page 394 for more information. Reader Command Description Options Audio Volume Changes the volume of all audio signals. 0 1 2 3 4 5 Off Very quiet Quiet Normal (default) Loud Very loud Automatic Shutoff Sets the length of time the 700 Color Computer remains on when there is no activity.
Appendix A — Configurable Settings Using Reader Commands After the 700 Color Computer is connected to your network, you can send the 700 Color Computer a reader command from an application to perform a task, such as changing the time and date. Some reader commands temporarily override the configuration settings and some change the configuration settings. Change Configuration The Change Configuration command must precede any configuration command.
Appendix A — Configurable Settings Set Time and Date This command sets the date and time on the 700 Color Computer. The default date and time is June 1, 1999 at 12:00 AM.
Appendix A — Configurable Settings Configuration Bar Codes You can change some settings on your 700 Color Computer by scanning the following Code 39 bar code labels. S You can use the Data Collection control panel to set the three Virtual Wedge parameters (starting on page 343). Note: When you use a bar code creation utility to make a scannable bar code label, the utility probably adds opening and closing asterisks automatically. Asterisks are included here for translation purposes.
Appendix A — Configurable Settings Automatic Shutoff Note: The Automatic Shutoff parameter information is on page 393. Set Automatic Shutoff to 1 minute *$+EZ1* *$+EZ1* Set Automatic Shutoff to 2 minutes *$+EZ2* *$+EZ2* Set Automatic Shutoff to 3 minutes (default) *$+EZ3* *$+EZ3* Set Automatic Shutoff to 4 minutes *$+EZ4* *$+EZ4* Set Automatic Shutoff to 5 minutes *$+EZ5* *$+EZ5* Backlight Timeout Note: The Backlight Timeout parameter information is on page 393.
Appendix A — Configurable Settings Backlight Timeout 2 minutes *$+DF120* *$+DF120* Backlight Timeout 3 minutes *$+DF180* *$+DF180* Backlight Timeout 4 minutes *$+DF240* *$+DF240* Backlight Timeout 5 minutes *$+DF300* *$+DF300* Key Clicks Note: The Key Clicks parameter information is on page 393.
Appendix A — Configurable Settings Virtual Wedge Grid, Preamble, Postamble The following parameters are user-configurable strings. Refer to a full ASCII chart for more information. Grid For Virtual Wedge Grid, the first part of the bar code would be the following, which can include a string of up to 240 characters. Parameter information starts on page 348.
Appendix A — Configurable Settings 400 700 Series Color Mobile Computer User’s Manual
B Troubleshooting This appendix contains a brief explanation of what you can do to troubleshoot your 700 Color Mobile Computer.
Appendix B — Troubleshooting The 700 Color Computer does not respond when connected to a power supply. Make sure your ac adapter or dock is plugged in and is making good contact with your mobile computer. The 700 Color Computer will not turn on when the I/O key is pressed. The battery may be low and need recharging. The Power status LED starts blinking. The Power status LED provides the status of your battery pack when it is connected to a charging device.
I Index The Classes and Functions Index covers classes and functions for the 700 Series Color Mobile Computer. The General Index covers all topics. Those in italics are figures, those in bold are tables. The Files Index is to assist you in locating descriptions for device drivers, applications, utilities, batch files, or other files within this publication.
Index Classes and Functions A add_registry_section, [AddReg] flags, 232 registry_root_string, 232 value_name, 232 AddReg, [DefaultInstall], 228 [AddReg], add_registry_section flags, 232 registry_root_string, 232 value_name, 232 AddWep(), 278 ANT_DIVERSITY, GetDiversity(), 271 ANT_PRIMARY, GetDiversity(), 271 ANT_SECONDARY, GetDiversity(), 271 AppName, [CEStrings], 225 Asset management, DeviceURL parameter, 243 B Basic connect/disconnect functions, 268 BlockSize, FTP Server, 243 BuildMax, [CEDevice], 226 Bu
Index FTP client, 245 configurable parameters, 243 BlockSize, 243 DeviceName, 243 DeviceURL, 243 PauseAtStartup, 244 FTPDCMDS subdirectory, 247 RTC 959, 247 server, 245 server requests CDUP, 245 CWD, 245 DELE, 245 HELP, 245 LIST, 245 MKD, 245 MODE, 245 NLST, 245 NOOP, 245 PASS, 245 PWD, 245 QUIT, 245 RETR, 245 RMD, 245 RNFR, 245 RNTO, 245 SITE, 246 SITE ATTRIB, 246 SITE BOOT, 246 SITE COPY, 246 SITE EKEY, 247 SITE EVAL, 247 SITE EXIT, 246 SITE GVAL, 247 SITE HELP, 246 SITE KILL, 246 SITE LOG, 246 SITE PLIS
Index ITC_NVPARM_WAN_RI, 252 IOCTL_HAL_ITC_WRITE_SYSPARM ITC_ DOCK_SWITCH, 256 ITC_ WAKEUP_MASK, 256 ITC_AMBIENT_FRONTLIGHT, 256 ITC_AMBIENT_KEYBOARD, 256 ITC_REGISTRY_SAVE_ENABLE, 256 IDNA DeviceName, 243 DeviceURL, 243 IDNATarget, FTP Server, 244 InstallDir, [CEStrings], 225 Intermec Device Network Announcement.
Index L lpBytesReturned IOCTL_GET_CPU_ID, 265 IOCTL_HAL_GET_BOOT_DEVICE, 262 IOCTL_HAL_GET_BOOTLOADER_VERINFO, 259 IOCTL_HAL_GET_DEVICE_INFO, 250 IOCTL_HAL_GET_DEVICEID, 257 IOCTL_HAL_GET_OAL_VERINFO, 258 IOCTL_HAL_GET_RESET_INFO, 261 IOCTL_HAL_ITC_READ_PARM, 251 IOCTL_HAL_ITC_WRITE_SYSPARM, 255 IOCTL_PROCESSOR_INFORMATION, 264 lpInBuf IOCTL_GET_CPU_ID, 265 IOCTL_HAL_COLDBOOT, 260 IOCTL_HAL_GET_BOOT_DEVICE, 262 IOCTL_HAL_GET_BOOTLOADER_VERINFO, 259 IOCTL_HAL_GET_DEVICE_INFO, 250 IOCTL_HAL_GET_DEVICEID, 257
Index NDIS_POWER_LEVEL_UNKNOWN, GetTXPower(), 275 NDIS_RADIO_ASSOCIATED, GetAssocationStatus(), 269 NDIS_RADIO_AUTH_MODE_AUTO GetAuthenticationMode(), 270 SetAuthenticationMode(), 280 NDIS_RADIO_AUTH_MODE_ERROR GetAuthenticationMode(), 270 SetAuthenticationMode(), 280 NDIS_RADIO_AUTH_MODE_OPEN GetAuthenticationMode(), 270 SetAuthenticationMode(), 280 NDIS_RADIO_AUTH_MODE_SHARED GetAuthenticationMode(), 270 SetAuthenticationMode(), 280 NDIS_RADIO_AUTH_MODE_WPA GetAuthenticationMode(), 270 SetAuthenticationM
Index Root, FTP Server, 244 S Set information functions, 278 SetAuthenticationMode(), 280 SetCCXStatus(), 282 SetChannel(), 280 SetDiversity(Deprecated), 288 SetMixedCellMode(), 282 SetNetworkMode(), 281 SetPowerMode(), 281 SetRTSThreshold(Deprecated), 288 SetSSID(), 282 SetTXRate(Deprecated), 288 SHFullScreen(), 241 shortcut_list_section, [CEShortcuts] shortcut_filename, 233 shortcut_type_flag, 233 target_file/path, 233 target_file_path, 233 Signature, [Version], 224 SIM cards protection hardware, 254 pro
Index General Index Numbers 1470 Imager.
Index Alphanumeric keypad alpha (blue) key sequences, 16 [gold/white] key sequences, 14 registry settings alpha plane, 293 gold plane, 293 unshifted plane, 293 scan codes, 296 Ambient lighting, 2 Annotations index, Microsoft Reader, 95 Antenna, radio type, 133 APIs 802.
Index Books, Microsoft Reader adding bookmarks, 95 adding drawings, 95 annotations index, 95 attaching notes, 95 copying, 95 downloading, 93 highlighting, 95 reading, 94 removing, 95 searching, 95 Browsing the Internet, Pocket Internet Explorer, 99 Build information, software, 20 C CAB files after the extraction, 236 creating, 224 INF files, 224 with CAB Wizard, 239 installation functions, SETUP.
Index Common Object Resource Environment.
Index Contacts adding a note, 68 adding a telephone number CDMA radios, 149 GSM radios, 155 adding to speed dial, 72 assigning to a category, 69 changing, 67 changing options, 72 copying, 69 creating, 65, 67 deleting, 71 finding, 71 MSN Messenger managing, 90 sending messages, 91 working with, 89 Pocket Outlook, 64 sending a message, 70 Start menu icon, 31 synchronizing, 65 viewing, 66 Control panel applets Audio, 8 backlight, 2, 12 clock, 395 data collection, 302 beeper volume, 9 beeper/LED, 332 imager, 3
Index image dimension, 340 interleaved 2 of 5, 317 interleaved 2 of 5 user ID, 326 lighting mode, 341 macro PDF, 314 matrix 2 of 5, 318 matrix 2 of 5 user ID, 328 maxicode, 323 micro PDF417, 316 MSI, 313 MSI user ID, 326 PDF417, 314 PDF417 user ID, 326 plessey, 312 plessey user ID, 327 prefix, 330 QR code, 321 standard 2 of 5, 305 standard 2 of 5 user ID, 327 sticky aimer duration, 339 suffix, 331 telepen, 319 telepen user ID, 328 UPC-E user ID, 327 UPC-A user ID, 327 UPC/EAN, 307 virtual wedge, 343 virtua
Index Full screen display, 241 G GDI approach, 198 General Packet Radio Service.
Index Installing applications using a storage card, 122 using CompactFlash cards, 122 using Secure Digital cards, 123 with ActiveSync, 121 with FTP Server, 122 Installing drivers DTR, 204 NPCP, 199 Instant messaging, 87 Integrated scanners. See Internal scanners Interface specifications, ETSI GSM 07.
Index virtual wedge code page, 349 virtual wedge grid, 348 virtual wedge postamble, 346 virtual wedge preamble, 344 SNMP configuration parameters identification contact, 359 identification location, 361 identification name, 360 security encryption key, 356 security read encryption, 354 security read-only community string, 352 security read/write community string, 353 security subnet mask, 324 security write encryption, 355 trap authentication, 357 trap threshold, 358 supported beeper functions, 332 symbolo
Index NDISUIO_PACKET_DRIVER, SwitchPacketDriver(), 288 Network adapters antenna color code, 133 Ethernet communications, 134 no networking, 135 wireless 802.11, 134 wireless printing, 189 Network EAP LEAP security method, 391 PEAP security method, 380 Network settings, Phone application, GSM radios, 158 Network type, 802.
Index Phone settings control panel applet CDMA radios, 151 GSM radios, 156 customizing via Phone application CDMA radios, 151 GSM radios, 156 network settings, GSM radios, 158 view current settings via Phone application, CDMA radios, 153 view current settings via WAN info, GSM radios, 158 PhoneUtility, 159 ring, 160 vibrate, 160 Physical dimensions, specifications, 26 Planes, keypad, 292 Plessey, configuration parameter, 312 user ID, 327 Pocket Excel about, 86 creating a workbook, 86 Pocket Internet Explor
Index Registry settings AutoCfg, 194 AutoFTP, 249 AutoInterval, 194 AutoIP/DHCP, 194 DhcpMaxRetry, 194 DhcpRetryDialogue, 194 EnableDHCP, 194 keypad driver, 294 keypad planes alpha, 293 gold, 293 unshifted, 293 Regulatory approvals, specifications, 26 Removing drivers DTR, 204 NPCP, 199 Removing programs, Windows Mobile, 45, 47 Replicating registry settings, 123 Reset button, 19 Reset connection settings for PCS Vision, Phone application, CDMA radios, 152 Roaming, toggle between automatic or Sprint, Phone
Index SNMP OIDs 1D OmniDir decode enable, 342 aimer LED duration, 338 beeper, 333 frequency, 335 volume, 334 codabar, 306 user ID, 325 code 11, 320 user ID, 329 code 128, 309 FNC1 character, 311 user ID, 325 code 39, 304 user ID, 325 code 93, 308 length, 308 user ID, 326 datamatrix, 322 EAN 13 user ID, 328 8 user ID, 328 good read beep duration, 337 beeps, 336 identification contact, 359 location, 361 name, 360 image dimension, 340 interleaved 2 of 5, 317 user ID, 326 lighting mode, 341 macro PDF, 314 matr
Index Symbologies internal scanner supported symbologies, 212 scanning labels, 396 tethered scanner supported symbologies, 222 user IDs Codabar, 325 Code 11, 329 Code 128, 325 Code 39, 325 Code 93, 326 EAN 13, 328 EAN 8, 328 Interleaved 2 of 5, 326 Matrix 2 of 5, 328 MSI, 326 PDF417, 326 Plessey, 327 Standard 2 of 5, 327 Telepen, 328 UPC A, 327 UPC E, 327 when not available imager, 312, 313, 314, 316, 318, 319, 320 laser scanner, 321, 322, 323 Synchronizing AvantGo channels, 98 Calendar, 51 contacts, 65 e-
Index Unshifted plane on keypad, regular keypad, 292 UPC, configuration parameter, 307 A user ID, 327 E user ID, 327 Update your PCS Vision profile, Phone application, CDMA radios, 152 Updating, bootloader, 121 URLs ActiveSync, 48 Adobe Acrobat Reader, 184 AT command interface CDMA/1xRTT SB555, 184 GPRS/GSM MC45, 184 GPRS/GSM MC46, 184 full screen display, 241 MIBs, 195 Microsoft Exchange e-mail account, 88 Microsoft Passport account, 88 Microsoft support, 29 MSDN library, 248 MSDN Windows CE documentation
Index Wireless network, 135, 373 creating a connection, 108 specifications, 25 Wireless printing Bluetooth compatible module, 189 unit information control panel, WP_SAMPLE.CAB file, 365 Wireless WAN AT command interface CDMA/1xRTT SB555, 184 GPRS/GSM MC45, 184 GPRS/GSM MC46, 184 CDMA/1xRTT, 140 GSM/GPRS, 142 testing AT commands, 185 Work creating a modem connection, 105 a VPN server connection, 113 700 Series Color Mobile Computer User’s Manual getting connected, 104 WPA authentication 802.
Index Files Index Numbers 80211API.DLL, 267 80211CONF.EXE, 267 80211SCAN.EXE, 267 802PM.DLL, 267 A AUTOUSER.DAT, 122, 123 C CABWIZ.DDF, 239 CABWIZ.EXE, 224, 239 CEIMAGER.EXE, 128 COREDLL.DLL, 289 CPL802.CPL, 267 D DEVICEID.H, 257 E EXITME.BIN, 247 F FTPDCE.EXE, 245, 247 AutoFTP, 249 FTP Server, 242 FTPDCE.TXT, 247 I INTERMEC.MIB, 195 ITCADC.MIB, 195 ITCSNMP.MIB, 195 ITCTERMINAL.MIB, 195 M MAKECAB.EXE, 239 MOD80211.DLL, 267 N NETWLAN.DLL, 267 NLED.
Corporate Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.
