Technologies Network Router User Manual

SECTION 4 " Configuration
4-12 6710 Access Point User’s Guide
Configuring the Access Point
When you create a local DIAG port or remote Telnet session
with the access point, the configuration program’s password
screen appears:
Configuration of Access Point
Copyright (c) 1995-1997 Norand Corporation. All rights reserved.
Portions copyright Epilogue Technology Corporation 1988-1995.
All rights reserved
IP: 0.0.0.0
Serial: (Unique 10-digit number.)
Password:
"
NOTE: A different screen appears when you create a session through a
Web browser. See page 4-88 for information about Web browser
sessions.
The password screen shows the current settings for the IP
address and serial number. It also shows the prompt for
the top-level password. Enter the password (case
insensitive) to display the Main Menu. The default
password is CR52401.
Main Menu
After you enter the top-level password, the Main Menu
appears: