Technologies Network Router User Manual

6710 Access Point User’s Guide 4-1
Section 4
Configuration
" " " " " " " " " " " " " " " " " " " " " " " " " " " "
This section describes how to:
" Create a local DIAG port, Telnet, and Web browser
session with the access point.
" Access the access point’s FLASH and ROM.
" Set up the access point through its configuration
menus.
You can configure the access point locally through its DIAG
port, or remotely through Telnet or a Web browser. The
following chart shows the sessions you can use to do other
tasks.
Task DIAG Port Telnet Browser
Change configuration pass-
words
Ö Ö Ö
Modify the configuration Ö Ö Ö
Upgrade FLASH Ö Ö
Check the FLASH version Ö Ö
Access ROM Ö
Check the ROM version Ö
Use online help Ö Ö Ö