Technologies Network Router User Manual

SECTION 3 " Installation
3-16 6710 Access Point User’s Guide
10BASE-T Ethernet
See Figure 3-11 and the procedure following it.
1. Cable with RJ45 plugs
2. RJ45 jack (or hub port)
1
Figure 3-11
10BASE-T
10 BASE 2
10 BASE T
AC INPUT
100/240 VAC
AUI
DIAG
1. Plug the cable with RJ45 jacks (1) into the 10 BASE T
port.
2. Plug the other end of the cable into RJ45 jack or hub
port (2).