Technologies Network Router User Manual

APPENDIX G " MIB
G-58 6710 Access Point User’s Guide
rtAge OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
”The time (in minutes) since the route was updated.”
::= { rtEntry 3 }
rtNodeId OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
”16-bit node ID of the destination. A 16-bit
identifier which uniquely identifies an OWL node in
an OWL LAN.”
::= { rtEntry 4 }
rtAttachId OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
”Attach sequence number. The sequence number is
copied from an OWL ATTACH request PDU. The sequence
number is not valid for ’remote’ nodes.”
::= { rtEntry 5 }
rtAttachTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
”Last attach time (.01 secs.)”
::= { rtEntry 6 }
rtApEaddr OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
”802 address of AP which is the first hop on
the path to the destination”
::= { rtEntry 7 }