Technologies Network Router User Manual

SECTION 6 " Indicator Lights
6-2 6710 Access Point User’s Guide
Each indicator light is labeled according to function. The
following chart lists the groups and their indicator lights.
Group Indicator Lights
ETHERNET
LINK and POLARITY
STATUS
STATUS and MODE
NETWORK MODE
R-LINK and W-LINK
PCMCIA
NIC1 and NIC2
ETHERNET Lights
ETHERNET indicator lights show the status of the access
point’s Ethernet connection. Table 6-1 shows what the
lights mean when ON and OFF.
Table 6-1
ETHERNET Indicator Lights
Light Status Indication
LINK ON Unit has successfully attached to the
Ethernet network.
OFF Unit has not attached to the Ethernet
network.
POLARITY OFF TX and RX lines on a 10BASE-T cable
are reversed.
STATUS Lights
STATUS indicator lights are labeled STATUS and MODE.