Technologies Network Router User Manual

SECTION 5 " Software Download
6710 Access Point User’s Guide 5-27
" Names of all files on the card.
" Type of file (executable, data, text).
" Size (in bytes) of each file.
" Date of each file.
" Version number of each file, in the format Vxx.xx.
FPE
FPE erases the entire contents of a PC card installed in PC
card slot NIC2 on the access point. Individual files cannot
be deleted. When you issue the FPE command, each
location on a PC card installed in slot NIC2 is overwritten
with 0’s.
FPX
FPX performs a Ymodem batch protocol download of a file
into an SRAM card installed in slot NIC2 on the access
point. The downloaded file appends to any existing files on
the PC card.
PN
PN turns off Power-Up Quiet mode (PQ).
PQ
PQ turns on Power-Up Quiet mode. When you configure
the access point to boot in quiet mode, it does not display
ROM power-up messages while it boots. More importantly,
it does not allow a single received character to invoke the
ROM command monitor and prevent the access point from
booting when a host is connected to it and trying to
communicate.
After you issue the PQ command, every ROM power-up
message is done in quiet mode. When you turn on quiet
mode you cannot access the ROM command monitor by
pressing a single keystroke during the boot sequence.