Technologies Network Router User Manual

SECTION 5 " Software Download
5-8 6710 Access Point User’s Guide
Fe Command
Fe erases files in a specified segment of FLASH memory.
Once you have erased the files, you can restore them only
by reloading them from another source. The command’s
format is:
File>fe <segment>
<segment> is a segment number, a segment name, or the
word “all.” Specifying “all” erases all FLASH file segments
but does not erase the RAM segment.
EXAMPLE 1: This command erases FLASH segment 1:
File>fe 1:
EXAMPLE 2: This command erases the inactive boot segment:
File>fe ib:
TFTP Command
Use the Tftp command to display the following screen:
Argument Description
Get Get <host IP addr> <foreign File> <local File>
Put Put <host IP addr> <foreign File> <local File>
Server Start/Stop/Query TFTP Server
? Display this help
File>
An access point (client) can obtain files from a TFTP server.
The server may be one access point configured to act as the
server, or another device on the network. The server must
operate in octet (8 bit) mode.