Technologies Network Router User Manual

SECTION 4 " Configuration
4-66 6710 Access Point User’s Guide
Settings for the Master are:
Enabled
Disabled
Setting Description
Enabled Sets up this access point’s radio port to wireless
hop. This access point honors connections from
an access point with a Slave radio.
Disabled
(default)
Prevents this access point’s radio port from
wireless hopping. This access point does not
honor connections from an access point with a
Slave radio.
[Slave Parms]
[Slave Parms] contains parameters this radio needs when
you configure it as a Slave radio. Options are:
Channel Subchannel
Master 1 1 1
Master 2 0 0
Master 3 0 0
Master 4 0 0
Master 5 0 0
Master 6 0 0
Master 7 0 0
Master 8 0 0
For the WLIF radio to wireless hop, at least one access
point on the secondary LAN must be equipped with a WLIF
radio configured for Slave mode. The secondary LAN can
be one of the following: