Technologies Network Router User Manual

SECTION 4 " Configuration
6710 Access Point User’s Guide 4-51
In example 2, [Frame Types] is set as follows:
Action Scope
DIX-IP-TCP Ports <Pass> <All>
DIX-IP-UDP Ports <Pass> <All>
DIX-IP-Other Protocols <Pass> <All>
DIX-IPX Sockets <Pass> <Unlisted>
DIX-Other EtherTypes <Pass> <Unlisted>
SNAP-IP-TCP Ports <Pass> <All>
SNAP-IP-UDP Ports <Pass> <All>
SNAP-IP-Other Protocols <Pass> <Unlisted>
SNAP-IPX Sockets <Pass> <Unlisted>
SNAP-Other EtherTypes <Pass> <Unlisted>
802.3-IPX Sockets <Pass> <Unlisted>
802.2-IPX Sockets <Pass> <Unlisted>
802.2-Other SAPs <Pass> <Unlisted>
[SubTypes 1] options are configured to drop IPX RIP for
802.2, DIX, and 802.3 frames. DIX is already specified as a
predefined filter. For 802.2 and 802.3 frames, it is
necessary to use a user-defined filter.
In example 2, [SubTypes 1] is set as follows:
Action SubType Value
DIX-ARP <Pass> <DIX-EtherType> 08 06
SNAP-ARP <Pass> <SNAP-EtherType> 08 06
802.2-IPX-RIP <Drop> <802.2-IPX-Socket> 04 51
802.2-IPX-SAP <Pass> <802.2-IPX-Socket> 04 53
NNL <Pass> <DIX-EtherType> 87 5b
NETBIOS <Pass> <802.2-SAP> f0 f0
1 <Drop> <DIX-IPX-Socket> 04 51
2 <Drop> <802.3-IPX-Socket> 04 51
3 <Pass> <DIX-IP-TCP-Port> 00 00
4 <Pass> <DIX-IP-TCP-Port> 00 00