Technologies Network Router User Manual

SECTION 4 " Configuration
4-48 6710 Access Point User’s Guide
Filtering Examples
The following network examples illustrate how filters may
be set to optimize wireless performance. The sample
network in Figure 4-3 contains the following:
" Wireless stations using IP.
" A secondary LAN containing IP and IPX hosts, linked
by access points (AP) 2 and 4.
" An IPX router connecting to another Novell network.
" DIX and 802.3 SNAP frames.
"
NOTE: Many networks use only one Ethernet frame type. DIX is the most
common type. Set filters only for the Ethernet frame types found on
your network.