Spec Sheet
North
America
Corporate Headquarters
6001 36
th
Avenue West
Everett, Washington 98203
tel: 425.348.2600
fax: 425.355.9551
Systems & Solutions
550 2
nd
Street S.E.
Cedar Rapids, Iowa 52401
tel: 319.369.3100
fax: 319.369.3453
Media Supplies
9290 Le Saint Drive
Fairfield, Ohio 45014
tel: 513.874.5882
fax: 513.874.8487
Europe/
Middle East & Africa
Headquarters
Sovereign House
Vastern Road
Reading, Berkshire RG1 8BT
United Kingdom
tel: +44.118.987.9400
fax: +44.118.987.9401
Gothenburg
Idrottsvägen 10
P.O. Box 123
SE-431 22 Mölndal
Sweden
tel: +46.31.869500
fax: +46.31.869595
Asia/
Latin America
Hong Kong
26-12 Shell Tower
Times Square
1 Matheson Street
Causeway Bay
Hong Kong
tel: 852.2574.9777
fax: 852.2574.9725
Singapore
25-16 International Plaza
10 Anson Road, 079903
tel: 65.324.8391
fax: 65.324.8393
Australia
Level 7, 200 Pacific Highway
Crows Nest NSW 2065
Australia
tel: 61.2.9901.2065
fax: 61.2.9954.6300
South America and Mexico
17921 B Skypark Circle
Irvine, California 92614
tel: 949.442.9393
fax: 949.757.1687
Worldwide
Fax Document
Retrieval Service
800.755.5505
(North America Only)
tel: 650.556.8447
Internet
www.intermec.com
Sales
800.347.2636
(toll free in N.A.)
tel: 425.348.2726
Service and Support
800.755.5505
(toll free in N.A.)
tel: 425.356.1799
Copyright © 2002 Intermec
Technologies Corporation. All
rights reserved. Intermec is a
registered trademark of Intermec
Technologies Corporation. All
other trademarks are the
property of their respective
owners. Printed in the U.S.A.
608767-01B 01/02
In a continuing effort to improve
our products, Intermec
Technologies Corporation
reserves the right to change
specifications and features
without prior notice.
ScanPlus® 1802 and MicroBar™ 9735
General Description
• A high performance and compact
wireless handheld bar code scanner
for Retail, Office, Health-Care and Light
Industrial applications.
• Models available include the ScanPlus
1802 SR(CCD) and ST (Laser).
Physical Characteristics
ScanPlus 1802
Length: 18 cm (7”)
Width at head: 6.4 cm (2.5”)
Width at handle: 3.3 cm (1.3”)
Weight: 232g (8.2 oz.) (inc. battery)
MicroBar 9735
Length: 8.5 cm (3.35”)
Width: 8.4 cm (3.3”)
Height: 4.2 cm (1.6”)
Weight: 84g (3 oz.)
Design Features
Processor: Custom chip (ASIC inc. DSP
processor) for fast signal processing and
decoding. Flash memory.
SR Optics: CCD linear image sensor with
sharp aiming beam. Light source: red, long
life LEDs.
ST Optics: visible Laser diode @ 670 nm.
Laser class 2 IEC 825-1/CDRH Class II
Radio: 433MHz and 908MHz narrow band
Performances
SR Models:
Scan rate: 400 scans per sec max
Minimum X dim: 0.1 mm (4 mil)
Skew: +- 65°
Pitch: +- 70°
Depth of field: up to 10 cm (4”)
depending on code
0.1 mm (4mil) 0-2 cm 0-0.8”
0.254 mm (10mil) 0-4cm 0-1.6”
100% EAN/UPC 0-5.5 cm 0-2.1”
0.38 mm (15 mil) 0-6 cm 0-2.4”
0.5 mm (20 mil) 0-7 cm 0-2.7”
0.7 mm (27 mil) 0-10 cm 0-4”
PCR: 25% min.
Code width: 12 cm (4”) max (X above
.254/10 mil)
ST Model:
Scan rate: 36 scan/sec
Minimum X dimension: 0.125 mm (5 mil)
Skew: +- 55°
Pitch: +- 65°
Depth of field: up to 50 cm, depending
on code:
0.125 mm (5 mil) 2.5-8 cm 1.3”
0.254 mm (10 mil): 0-20 cm 0-7.9”
100% EAN/UPC 0-25cm 0-10”
0.38 mm (15 mil) 0-30 cm 0-12”
0.5 mm (20 mil) 0-50 cm 0-20”
PCR: 25% minimum
Bar Codes Supported
All Models: UPC E, A, EAN, Code 39;
Interleaved, Matrix, Industrial and
standard 2 of 5; Code 128, UCC EAN 128,
Codabar, Code 93, MSI, Plessey.
Environmental Characteristics*
Operating temperature:
0° to 40°C (32° to 104°F)
Storage temperature: -
20° to 55° (-4° to 131°F)
Relative humidity:
10% to 90% non-condensing
Shock: withstand multiple drops of 1 m
(3.2 ft) to concrete.
Approvals:
908MHz: UL listed, cUL listed, UL 1950
433MHz: TÜV-Rheinland GS licensed
EN60950, CE marked
Radio
Range: up to 15 meters (16.5 yds)
Frequency:
European version: unlicenced 433 MHz
U.S. version: unlicenced 908MHz
Approvals:
European version: EN 300 220-1
U.S. version: FCC Part 15.249
Base Station MicroBar 9735
Interfaces: RS 232 C, Wedge to PC
keyboards, including, including IBM,
Apple Mac, and many retail terminals
(including IBM 3XXX, NCR, Wyse, etc.)
Wireless Devices: possibility to connect
multiple wireless scanners
Input Devices: up to 4 input devices
Power requirements: +5VDC (+/- 5%)
Advanced Data formatting: Pre and
postambules (20 characters + 2 characters
for AIM symbology identifiers), port
address (15 characters), masking and re-
ordering function.
Battery Pack
600mAh, NiMH, 3.6V
Capacity: up to 7,000 scans
Charger
Modular 2 bay charger 110/240 VAC
Battery Recharge time: 3 hr max.
Size: 200x 120x75 mm
1802 ST only: US DHHS Standard 21 CFR 1040, 10 and
1040,11 (1994) as a Class II Laser product, IEC 825-1
(1993), EN60825-1 (1994) Class 2.


