Quick Start Guide 681/682/781T/782 40-Column Printers
681/682 and 781T/782 Printer Quick Start Guide Packing List Check to ensure that you receive these items: OR Intermec R 682 Printer Intermec R 681 Printer p/n 320-083-00x p/n 320-082-00x OR Intermec R 781T Printer Intermec R 782 Printer p/n 320-085-00x p/n 320-084-00x with card reader p/n 320-084-003 Product Warranty Card Compliance Statement 2
681/682 and 781T/782 Printer Quick Start Guide Common Accessories Sold Separately AC Wall Charger p/n 851-060-002 Order power cord under separate part number Mobile Computer to PrinterCable p/n 226-469-001 (RJ-45 connector on the printer end) p/n 321-578-001 (RJ-11 connector on the printer end) Cigarette Lighter Charger p/n 852-043-001 3
681/682 and 781T/782 Printer Quick Start Guide Getting Started Here are the main components of the Intermec R 681 and 682 printers.
681/682 and 781T/782 Printer Quick Start Guide Charging the Lithium Ion Batteries " " The printer battery charges in about 3 hours. You can charge both the Mobile Computer and the Printer battery at the same time using the AC or Cigarette Lighter Charger. The time to charge both batteries is about 8 hours.
81/682 and 781T/782 Printer Quick Start Guide Beep Indicators Number of Beeps One Two Three One long beep 6 Indicates A) Printer has come out of sleep mode. B) Using the 781T with wireless printing, the radio when enabled but not put in use for a while beeps every five minutes to let you know it is enabled and also using battery life. Printer is out of paper. Battery is low. No program in printer, only boot code.
681/682 and 781T/782 Printer Quick Start Guide Using Your Printer Intermec R 681 or 781T Printer 1. Attach the Mobile Computer to Printer cable. RJ-11 cable p/n 321-578-001, RJ-45 cable p/n 226-469-001 . 2. As you use the printer the power comes from the battery in the printer. When the printer battery runs down the printer will not operate until the battery is recharged. Computer to Printer Jack Mobile Computer to Printer Cable Attaching Computer to Printer Cable Intermec R 682 or 782 Printer 1.
681/682 and 781T/782 Printer Quick Start Guide Using the Card Reader Slide the card down into the reader with the magnetic tape to the right side.
681/682 and 781T/782 Printer Quick Start Guide 781T Printer using Wireless Printing IrDA/Wireless Mode Your printer comes to you as an IrDA mode printer. To switch the mode to Wireless Printing it is necessary to toggle the mode via the self-test function of the printer. Performing the self-test indicates the current mode of the printer. The mode displays on the ticket and an audible indication sounds.
681/682 and 781T/782 Printer Quick Start Guide 700 Mobile Computer Preparation 1. On your mobile computer, tap the Bluetootht icon located in the System tray on the Today screen. 2. Select Advanced Features>Bluetooth Devices. 3. From the Tools menu, select Device Discovery. You are presented with a couple of screens detailing the device discovery process. 4. You are now presented with a screen allowing you to modify the selection parameters. The default should work for your needs. 5. Click Next to proceed.
681/682 and 781T/782 Printer Quick Start Guide 9. The Bluetooth Serial Port service is necessary for the virtual COM port to work. Choose COM6 in your application to use the Wireless Printing device you selected. Verify that this service was discovered by looking at the properties for this printer (Device>Properties). 10. Verify that your Wireless Printing device is set as your “favorite” device. In the Bluetooth Devices Folder, select Tools>My Favorite.
681/682 and 781T/782 Printer Quick Start Guide Battery Pack Removal Ensure that you have your ESD wrist strap connected to the ESD static free mat before placing your printer on the mat and begin removing the battery pack. 1. Remove the four screws securing the printer mechanism. 1 Screws (4) (two on each side) 681/781 Printers Screws (4) (two on each side) 682/782 Printers 2. Lift the printer mechanism out of the case.
681/682 and 781T/782 Printer Quick Start Guide 3. Set the printer assembly down to view the underside of printer mechanism and battery compartment. 3 Battery pack compartment Printer assembly wire cluster Battery pack cable 4. Remove the four screws securing the battery cover. Avoid contact with the printer control board unless the board is grounded.
681/682 and 781T/782 Printer Quick Start Guide 5. Gently disconnect the keyed battery pack connector (with the black and red wires) from the board assembly. You may find that you have to wiggle the connector a bit to remove it from the connector. Underside of battery compartment 5a 5b Keyed battery pack connector Keyed battery pack cable 6. Once the cover is removed gently tap the cover in your hand or lift up on one of the battery retaining foam strips to separate the battery pack from the cover.
681/682 and 781T/782 Printer Quick Start Guide 7. Insert the new battery pack into the battery cover. 8. Reinstall the battery cover. 9. Reconnect the keyed battery cable. Routing the battery pack wires is very important. " The wires must not be pinched or crimped when reinserting the printer mechanism into the printer case. 10. Reposition the battery pack assembly on the printer mechanism. 11. Replace the four screws to secure the battery pack cover to the printer mechanism.
681/682 and 781T/782 Printer Quick Start Guide General Specifications Temperatures Operating: Thermal 781T Dot Matrix --20 to +50° C (--4 to 122° F) 0 to +40° C (32 to +104° F) 0 to +50° C (32 to 122° F) Storage: Thermal --30 to +65° C (--22 to +149° F) Dot Matrix --30 to +65° C (--22 to +149° F) Wireless Printing Radio Option: Operating: 0 to +40° C (32 to +104° F) Continuous Operation off charge: Thermal (over 8 hours) Dot Matrix (over 4 hours) Charging: 2--3 hours quick charge using AC adapter or ci
