Datasheet

Trakker Antares 241X Hand-Held Terminal Service Manual nuggetf d39

Safety Icons

This section explains how to identify and understand warnings, cautions, and notes that

are in this document. You may also see icons that tell you when to follow ESD

procedures and when to take special precautions for handling optical parts.

Warning

A warning alerts you of an operating procedure, practice, condition, or statement

that must be strictly observed to avoid death or serious injury to the persons working

on the equipment.

Caution

A caution alerts you to an operating procedure, practice, condition, or statement that

must be strictly observed to prevent equipment damage or destruction, or corruption

or loss of data.

This icon appears at the beginning of any procedure in this manual that could cause

you to touch components (such as printed circuit boards) that are susceptible to

damage from electrostatic discharge (ESD). When you see this icon, you must follow

standard ESD guidelines to avoid damaging the equipment you are servicing.

Because finger oils can impede the performance of scanner parts and dissolve the

reflective coating of the plastic mirrors, always wear finger cots or non-powdered

latex gloves when handling optical parts.

Note: Notes either provide extra information about a topic or contain special

instructions for handling a particular condition or set of circumstances.

Page 2-3 lists cautions you must follow before repairing the 241X.

Global Services and Support

Warranty Information

To understand the warranty for your Intermec product, visit the Intermec web site at

http://www.intermec.com, click Support, and then click Warranty.

Disclaimer of warranties: The sample code included in this document is presented for

reference only. The code does not necessarily represent complete, tested programs. The

code is provided “as is with all faults.” All warranties are expressly disclaimed,

including the implied warranties of merchantability and fitness for a particular purpose.