Datasheet

Trakker Antares 241X Hand-Held Terminal Service Manual nugget
2-16
You also need the following parts depending on the terminal’s configuration:
• One of these display lenses
• 2410 (P/N 069423-003)
• 2415 (P/N 069427-003)
• Clear Orbit Label (if necessary) (P/N 071228-001)
• Oracle Ready Label (if necessary) (P/N 072558-001)
• One of these keypad assemblies
• 37-key function numeric (P/N 069842S-004)
• 37-key large numeric (P/N 069472S-004)
• 55-key alphanumeric (P/N 069471S-004)
• One of these keypad overlays
• 37-key basic (P/N 069421-001)
• 37-key international (P/N 069422-001)
• 37-key 5250 TE (P/N 070279-001)
• 37-key 3270 TE (P/N 070377-001)
• 37-key VT/ANSI TE (P/N 069420-001)
• 37-key function numeric (P/N 069836-001)
• 37-key international function numeric (P/N 069840-001)
• 37-key VT/ANSI TE function numeric (P/N 069841-001)
• 55-key basic (P/N 069417-001)
• 55-key international (P/N 069419-001)
• 55-key 5250 TE (P/N 069418-001)
• 55-key 3270 TE (P/N 070376-001)
• 55-key VT/ANSI TE (P/N 069416-003)
To replace the keypad assembly
1. Open the terminal. For help, see “Opening the Terminal” on page 2-4.
2. Remove the LCD. Follow Steps 2 through 6 for “Replacing the LCD” on page
2-13.
3. Remove the adhesive backing from the keypad overlay and apply it to the new
keypad assembly.