Datasheet

nugget Replacing Parts
2-11
2
Replacing the Beeper
To replace the beeper, you need the following tools:
• #1 Phillips screwdriver
• Flathead screwdriver
• Torque screwdriver
You also need the following part:
• Display/beeper flex cable assembly (P/N 069705-002)
To replace the beeper
1. Open the terminal. For help, see “Opening the Terminal” on page 2-4.
2. Remove the main PCB. Follow Steps 2 through 5 for “Replacing the Main PCB”
on page 2-9.
3. Remove the display/beeper flex cable from the LCD.
Display/beeper
flex cable
LCD
Screw
(four places)
Beeper
Top cover
241XM022.eps
4. Use the flathead screwdriver to gently pry the beeper off of the top cover.