Datasheet

nugget Replacing Parts
2-7
2
6. Press the antenna cable or cables into the connectors on the radio.
• If you are replacing an
802.11b radio, connect the
antenna cables to ports | and
|| as shown.
Antenna
cable
(2 places)
Port I
Port II
241XM018.eps
• If you are replacing an
OpenAir radio, connect
the antenna cable to the
connector on the radio.
Antenna
cable
241XM019.eps
7. Remove the remaining backing from the mount strap, pull the mount strap over the
antenna cable connectors, and secure the mount strap to the top of the radio card.
8. Close the terminal. For help, see “Closing the Terminal” on page 2-36.