Datasheet

C39

Hands-Free Scanning

If you have an auto-trigger scanner (1550C0100), you can use the

scanner stand for hands-free scanning. To order a scanner stand,

see “Accessories” later in this guide.

Note: Using the IRL Z command for remote triggering will not work

with the Sabre 1550 scanner.

To scan a bar code using the scanner stand

155XQG.005

Holder

155XQG.004

*HI*

1. Place the scanner handle

on the bottom ledge of the

holder and then rotate the

handle in the holder until

it locks into place.

2. Align the scanner and

adjust the column height

so that the pulsating laser

beam covers the entire

label on the base of the

stand.

3. To scan a bar code, place it

right-side up over the label

on the base of the stand.

When the reader/terminal

beeps, the bar code has been

successfully read.

Note: If your scanner stand does

not have a small magnet in the

holder, you need to upgrade your

stand using upgrade kit part

number 066799.